| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1439778711-9621-4-git-send-email-ming.lei@canonical.com>
Date: Mon, 17 Aug 2015 10:31:48 +0800
From: Ming Lei <ming.lei@...onical.com>
To: Jens Axboe <axboe@...nel.dk>, linux-kernel@...r.kernel.org,
Dave Kleikamp <dave.kleikamp@...cle.com>
Cc: Zach Brown <zab@...bo.net>, Christoph Hellwig <hch@...radead.org>,
Maxim Patlasov <mpatlasov@...allels.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Alexander Viro <viro@...iv.linux.org.uk>,
Tejun Heo <tj@...nel.org>, Dave Chinner <david@...morbit.com>,
Ming Lei <ming.lei@...onical.com>
Subject: [PATCH v10 3/6] block: loop: use kthread_work
The following patch will use dio/aio to submit IO to backing file,
then it needn't to schedule IO concurrently from work, so
use kthread_work for decreasing context switch cost a lot.
For non-AIO case, single thread has been used for long long time,
and it was just converted to work in v4.0, which has caused performance
regression for fedora live booting already. In discussion[1], even
though submitting I/O via work concurrently can improve random read IO
throughput, meantime it might hurt sequential read IO performance, so
better to restore to single thread behaviour.
For the following AIO support, it is better to use multi hw-queue
with per-hwq kthread than current work approach suppose there is so
high performance requirement for loop.
[1] http://marc.info/?t=143082678400002&r=1&w=2
Signed-off-by: Ming Lei <ming.lei@...onical.com>
---
drivers/block/loop.c | 79 ++++++++++++++++------------------------------------
drivers/block/loop.h | 10 +++----
2 files changed, 28 insertions(+), 61 deletions(-)
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index eee7510..1875aad 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -688,6 +688,23 @@ static void loop_config_discard(struct loop_device *lo)
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
}
+static void loop_unprepare_queue(struct loop_device *lo)
+{
+ flush_kthread_worker(&lo->worker);
+ kthread_stop(lo->worker_task);
+}
+
+static int loop_prepare_queue(struct loop_device *lo)
+{
+ init_kthread_worker(&lo->worker);
+ lo->worker_task = kthread_run(kthread_worker_fn,
+ &lo->worker, "loop%d", lo->lo_number);
+ if (IS_ERR(lo->worker_task))
+ return -ENOMEM;
+ set_user_nice(lo->worker_task, MIN_NICE);
+ return 0;
+}
+
static int loop_set_fd(struct loop_device *lo, fmode_t mode,
struct block_device *bdev, unsigned int arg)
{
@@ -745,11 +762,8 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
size = get_loop_size(lo, file);
if ((loff_t)(sector_t)size != size)
goto out_putf;
- error = -ENOMEM;
- lo->wq = alloc_workqueue("kloopd%d",
- WQ_MEM_RECLAIM | WQ_HIGHPRI | WQ_UNBOUND, 16,
- lo->lo_number);
- if (!lo->wq)
+ error = loop_prepare_queue(lo);
+ if (error)
goto out_putf;
error = 0;
@@ -903,8 +917,7 @@ static int loop_clr_fd(struct loop_device *lo)
lo->lo_flags = 0;
if (!part_shift)
lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN;
- destroy_workqueue(lo->wq);
- lo->wq = NULL;
+ loop_unprepare_queue(lo);
mutex_unlock(&lo->lo_ctl_mutex);
/*
* Need not hold lo_ctl_mutex to fput backing file.
@@ -1461,23 +1474,7 @@ static int loop_queue_rq(struct blk_mq_hw_ctx *hctx,
if (lo->lo_state != Lo_bound)
return -EIO;
- if (cmd->rq->cmd_flags & REQ_WRITE) {
- struct loop_device *lo = cmd->rq->q->queuedata;
- bool need_sched = true;
-
- spin_lock_irq(&lo->lo_lock);
- if (lo->write_started)
- need_sched = false;
- else
- lo->write_started = true;
- list_add_tail(&cmd->list, &lo->write_cmd_head);
- spin_unlock_irq(&lo->lo_lock);
-
- if (need_sched)
- queue_work(lo->wq, &lo->write_work);
- } else {
- queue_work(lo->wq, &cmd->read_work);
- }
+ queue_kthread_work(&lo->worker, &cmd->work);
return BLK_MQ_RQ_QUEUE_OK;
}
@@ -1499,35 +1496,10 @@ static void loop_handle_cmd(struct loop_cmd *cmd)
blk_mq_complete_request(cmd->rq);
}
-static void loop_queue_write_work(struct work_struct *work)
-{
- struct loop_device *lo =
- container_of(work, struct loop_device, write_work);
- LIST_HEAD(cmd_list);
-
- spin_lock_irq(&lo->lo_lock);
- repeat:
- list_splice_init(&lo->write_cmd_head, &cmd_list);
- spin_unlock_irq(&lo->lo_lock);
-
- while (!list_empty(&cmd_list)) {
- struct loop_cmd *cmd = list_first_entry(&cmd_list,
- struct loop_cmd, list);
- list_del_init(&cmd->list);
- loop_handle_cmd(cmd);
- }
-
- spin_lock_irq(&lo->lo_lock);
- if (!list_empty(&lo->write_cmd_head))
- goto repeat;
- lo->write_started = false;
- spin_unlock_irq(&lo->lo_lock);
-}
-
-static void loop_queue_read_work(struct work_struct *work)
+static void loop_queue_work(struct kthread_work *work)
{
struct loop_cmd *cmd =
- container_of(work, struct loop_cmd, read_work);
+ container_of(work, struct loop_cmd, work);
loop_handle_cmd(cmd);
}
@@ -1539,7 +1511,7 @@ static int loop_init_request(void *data, struct request *rq,
struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq);
cmd->rq = rq;
- INIT_WORK(&cmd->read_work, loop_queue_read_work);
+ init_kthread_work(&cmd->work, loop_queue_work);
return 0;
}
@@ -1601,9 +1573,6 @@ static int loop_add(struct loop_device **l, int i)
*/
queue_flag_set_unlocked(QUEUE_FLAG_NOMERGES, lo->lo_queue);
- INIT_LIST_HEAD(&lo->write_cmd_head);
- INIT_WORK(&lo->write_work, loop_queue_write_work);
-
disk = lo->lo_disk = alloc_disk(1 << part_shift);
if (!disk)
goto out_free_queue;
diff --git a/drivers/block/loop.h b/drivers/block/loop.h
index 25e8997..b6c7d21 100644
--- a/drivers/block/loop.h
+++ b/drivers/block/loop.h
@@ -14,7 +14,7 @@
#include <linux/blk-mq.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
#include <uapi/linux/loop.h>
/* Possible states of device */
@@ -54,12 +54,10 @@ struct loop_device {
gfp_t old_gfp_mask;
spinlock_t lo_lock;
- struct workqueue_struct *wq;
- struct list_head write_cmd_head;
- struct work_struct write_work;
- bool write_started;
int lo_state;
struct mutex lo_ctl_mutex;
+ struct kthread_worker worker;
+ struct task_struct *worker_task;
struct request_queue *lo_queue;
struct blk_mq_tag_set tag_set;
@@ -67,7 +65,7 @@ struct loop_device {
};
struct loop_cmd {
- struct work_struct read_work;
+ struct kthread_work work;
struct request *rq;
struct list_head list;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists