[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150817115242.4ae9a51e@recife.lan>
Date: Mon, 17 Aug 2015 11:52:42 -0300
From: Mauro Carvalho Chehab <mchehab@....samsung.com>
To: Peter Griffin <peter.griffin@...aro.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
srinivas.kandagatla@...il.com, maxime.coquelin@...com,
patrice.chotard@...com, m.krufky@...sung.com, lee.jones@...aro.org,
hugues.fruchet@...com, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, joe@...ches.com
Subject: Re: [PATCH v2 05/11] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB
DT node.
Em Thu, 30 Jul 2015 18:08:55 +0100
Peter Griffin <peter.griffin@...aro.org> escreveu:
> This patch adds in the required DT node for the c8sectpfe
> Linux DVB demux driver which allows the tsin channels
> to be used on an upstream kernel.
>
> Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
> ---
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 38 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 62994ae..1bc018e 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -6,6 +6,10 @@
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> */
> +
> +#include <dt-bindings/clock/stih407-clks.h>
> +#include <dt-bindings/media/c8sectpfe.h>
> +
> / {
> soc {
> sbc_serial0: serial@...0000 {
> @@ -85,5 +89,39 @@
> status = "okay";
> };
>
> + c8sectpfe@...20000 {
> + compatible = "st,stih407-c8sectpfe";
> + status = "okay";
> + reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
> + reg-names = "c8sectpfe", "c8sectpfe-ram";
> +
> + interrupts = <0 34 0>, <0 35 0>;
> + interrupt-names = "c8sectpfe-error-irq",
> + "c8sectpfe-idle-irq";
> +
> + pinctrl-names = "tsin0-serial", "tsin0-parallel",
> + "tsin3-serial", "tsin4-serial",
> + "tsin5-serial";
> +
> + pinctrl-0 = <&pinctrl_tsin0_serial>;
> + pinctrl-1 = <&pinctrl_tsin0_parallel>;
> + pinctrl-2 = <&pinctrl_tsin3_serial>;
> + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
> + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
> +
> + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
> + clock-names = "c8sectpfe";
> +
> + /* tsin0 is TSA on NIMA */
> + tsin0: port@0 {
> +
> + tsin-num = <0>;
> + serial-not-parallel;
> + i2c-bus = <&ssc2>;
There's no ssc2 defined at the device tree.
I'll revert this patch and mark the driver as broken until this gets
fixed.
Regards,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists