| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMz4kuJVQyzvqb2kRF=GpmQEXo28sQveZKUWnKbP+MQtB+ghsQ@mail.gmail.com>
Date: Wed, 19 Aug 2015 18:27:10 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: Felipe Balbi <balbi@...com>, Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
LKML <linux-kernel@...r.kernel.org>,
Greg KH <gregkh@...uxfoundation.org>,
Peter Chen <peter.chen@...escale.com>, sojka@...ica.cz,
Alan Stern <stern@...land.harvard.edu>, r.baldyga@...sung.com,
yoshihiro.shimoda.uh@...esas.com, linux-usb@...r.kernel.org,
device-mainlining@...ts.linuxfoundation.org, sre@...nel.org,
Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
David Woodhouse <dwmw2@...radead.org>, sameo@...ux.intel.com,
patches@...nsource.wolfsonmicro.com, linux-pm@...r.kernel.org
Subject: Re: [PATCH v4 5/5] power: wm831x_power: Support USB charger current
limit management
On 19 August 2015 at 17:56, Lee Jones <lee.jones@...aro.org> wrote:
> On Wed, 19 Aug 2015, Baolin Wang wrote:
>
>> Integrate with the newly added USB charger interface to limit the current
>> we draw from the USB input based on the input device configuration
>> identified by the USB stack, allowing us to charge more quickly from high
>> current inputs without drawing more current than specified from others.
>>
>> Signed-off-by: Mark Brown <broonie@...nel.org>
>> Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
>> ---
>> drivers/power/wm831x_power.c | 69 ++++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/wm831x/pdata.h | 3 ++
>
> I'm not going to keep reviewing this. You should carry forward any
> Acks received onto subsequent submissions yourself.
>
OK, thanks.
>> 2 files changed, 72 insertions(+)
>>
>> diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c
>> index db11ae6..72c661f 100644
>> --- a/drivers/power/wm831x_power.c
>> +++ b/drivers/power/wm831x_power.c
>> @@ -13,6 +13,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/power_supply.h>
>> #include <linux/slab.h>
>> +#include <linux/usb/usb_charger.h>
>>
>> #include <linux/mfd/wm831x/core.h>
>> #include <linux/mfd/wm831x/auxadc.h>
>> @@ -31,6 +32,8 @@ struct wm831x_power {
>> char usb_name[20];
>> char battery_name[20];
>> bool have_battery;
>> + struct usb_charger *usb_charger;
>> + struct notifier_block usb_notify;
>> };
>>
>> static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
>> @@ -125,6 +128,43 @@ static enum power_supply_property wm831x_usb_props[] = {
>> POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> };
>>
>> +/* In miliamps */
>> +static unsigned int wm831x_usb_limits[] = {
>> + 0,
>> + 2,
>> + 100,
>> + 500,
>> + 900,
>> + 1500,
>> + 1800,
>> + 550,
>> +};
>> +
>> +static int wm831x_usb_limit_change(struct notifier_block *nb,
>> + unsigned long limit, void *data)
>> +{
>> + struct wm831x_power *wm831x_power = container_of(nb,
>> + struct wm831x_power,
>> + usb_notify);
>> + int i, best;
>> +
>> + /* Find the highest supported limit */
>> + best = 0;
>> + for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
>> + if (limit < wm831x_usb_limits[i] &&
>> + wm831x_usb_limits[best] < wm831x_usb_limits[i])
>> + best = i;
>> + }
>> +
>> + dev_dbg(wm831x_power->wm831x->dev,
>> + "Limiting USB current to %dmA", wm831x_usb_limits[best]);
>> +
>> + wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
>> + WM831X_USB_ILIM_MASK, best);
>> +
>> + return 0;
>> +}
>> +
>> /*********************************************************************
>> * Battery properties
>> *********************************************************************/
>> @@ -606,8 +646,31 @@ static int wm831x_power_probe(struct platform_device *pdev)
>> }
>> }
>>
>> + if (wm831x_pdata && wm831x_pdata->usb_gadget) {
>> + power->usb_charger =
>> + usb_charger_find_by_name(wm831x_pdata->usb_gadget);
>> + if (IS_ERR(power->usb_charger)) {
>> + ret = PTR_ERR(power->usb_charger);
>> + dev_err(&pdev->dev,
>> + "Failed to find USB gadget: %d\n", ret);
>> + goto err_bat_irq;
>> + }
>> +
>> + power->usb_notify.notifier_call = wm831x_usb_limit_change;
>> +
>> + ret = usb_charger_register_notify(power->usb_charger,
>> + &power->usb_notify);
>> + if (ret != 0) {
>> + dev_err(&pdev->dev,
>> + "Failed to register notifier: %d\n", ret);
>> + goto err_usb_charger;
>> + }
>> + }
>> +
>> return ret;
>>
>> +err_usb_charger:
>> + usb_charger_put(power->usb_charger);
>> err_bat_irq:
>> --i;
>> for (; i >= 0; i--) {
>> @@ -637,6 +700,12 @@ static int wm831x_power_remove(struct platform_device *pdev)
>> struct wm831x *wm831x = wm831x_power->wm831x;
>> int irq, i;
>>
>> + if (wm831x_power->usb_charger) {
>> + usb_charger_unregister_notify(wm831x_power->usb_charger,
>> + &wm831x_power->usb_notify);
>> + usb_charger_put(wm831x_power->usb_charger);
>> + }
>> +
>> for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>> irq = wm831x_irq(wm831x,
>> platform_get_irq_byname(pdev,
>> diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
>> index dcc9631..5af8399 100644
>> --- a/include/linux/mfd/wm831x/pdata.h
>> +++ b/include/linux/mfd/wm831x/pdata.h
>> @@ -126,6 +126,9 @@ struct wm831x_pdata {
>> /** The driver should initiate a power off sequence during shutdown */
>> bool soft_shutdown;
>>
>> + /** dev_name of USB charger gadget to integrate with */
>> + const char *usb_gadget;
>> +
>> int irq_base;
>> int gpio_base;
>> int gpio_defaults[WM831X_GPIO_NUM];
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists