[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1440006802-2415-1-git-send-email-mathieu@codeaurora.org>
Date: Wed, 19 Aug 2015 10:53:21 -0700
From: Mathieu Olivari <mathieu@...eaurora.org>
To: agross@...eaurora.org, sboyd@...eaurora.org, galak@...eaurora.org
Cc: robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, linux@....linux.org.uk,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Mathieu Olivari <mathieu@...eaurora.org>
Subject: [PATCH 1/2] ARM: qcom: add mdio bus on IPQ806x/AP148
Ethernet switch on AP148 is connected through MDIO using GPIO 0 and 1.
We'll add the new node using the bitbang driver on these two pins.
Signed-off-by: Mathieu Olivari <mathieu@...eaurora.org>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 6886d09..d73df24 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -19,8 +19,9 @@
};
};
- alias {
+ aliases {
serial0 = &uart4;
+ mdio-gpio0 = &mdio0;
};
chosen {
@@ -84,6 +85,15 @@
};
};
};
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
sata-phy@...00000 {
@@ -93,5 +103,24 @@
sata@...00000 {
status = "ok";
};
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+
+ phy4: ethernet-phy@4 {
+ device_type = "ethernet-phy";
+ reg = <4>;
+ };
+ };
};
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists