linux-kernel - [PATCH v4 0/5] mtd: Qualcomm NAND controller driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1439959746-25498-1-git-send-email-architt@codeaurora.org>
Date:	Wed, 19 Aug 2015 10:19:01 +0530
From:	Archit Taneja <architt@...eaurora.org>
To:	linux-mtd@...ts.infradead.org, dehrenberg@...gle.com,
	cernekee@...il.com, computersforpeace@...il.com,
	sboyd@...eaurora.org
Cc:	linux-arm-msm@...r.kernel.org, agross@...eaurora.org,
	linux-kernel@...r.kernel.org,
	Archit Taneja <architt@...eaurora.org>
Subject: [PATCH v4 0/5] mtd: Qualcomm NAND controller driver

Add support for the NAND controller driver for SoC's that contain EBI2.
For now, the only SoC upstream that has EBI2 is IPQ806x.

The original version was posted a while back. The main comments were
about the driver not being able to use nand_bbt. This was because the
controller could read factory bad block markers only in RAW mode. This
forced us to implement our own versions of chip->block_bad and
chip->blobk_markbad, and also we had to skip creating a BBT.

Discussions with Kevin Cernekee concluded that having a new BBT flag
that incorporates this controller's special requirement is a possible
option.

The new version makes use of this flag and now uses nand_bbt, at the
cost of implement read_oob_raw and write_oob_raw ops.

The patchset requires the v6 ADM dmaengine patches posted by Andy:

https://lkml.org/lkml/2015/3/17/19

v4:
- Some more fixes. Mentioned in patch's changelog.

v3:
- Various fixes and clean ups suggested by Stephen Boyd.

v2:
- Added a new BBT flag that allows us to read BBM in raw mode
- reduce memcpy-s in the driver
- some refactor and clean ups because of above changes

v1:
- original series:
  https://lkml.org/lkml/2015/1/16/317

Archit Taneja (5):
  mtd: nand: Create a BBT flag to access bad block markers in raw mode
  mtd: nand: Qualcomm NAND controller driver
  dt/bindings: qcom_nandc: Add DT bindings
  arm: qcom: dts: Add NAND controller node for ipq806x
  arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform

 .../devicetree/bindings/mtd/qcom_nandc.txt         |   49 +
 arch/arm/boot/dts/qcom-ipq8064-ap148.dts           |   40 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi                |   15 +
 drivers/mtd/nand/Kconfig                           |    7 +
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/nand_base.c                       |    6 +-
 drivers/mtd/nand/nand_bbt.c                        |    6 +-
 drivers/mtd/nand/qcom_nandc.c                      | 1910 ++++++++++++++++++++
 include/linux/mtd/bbm.h                            |    7 +
 9 files changed, 2039 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
 create mode 100644 drivers/mtd/nand/qcom_nandc.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/