[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <6480369A-D108-4FBD-9041-ED925D8FD922@gmail.com>
Date: Thu, 20 Aug 2015 16:22:43 +0900
From: Jingoo Han <jingoohan1@...il.com>
To: Yakir Yang <ykk@...k-chips.com>
Cc: Heiko Stuebner <heiko@...ech.de>,
Thierry Reding <treding@...dia.com>,
Fabio Estevam <fabio.estevam@...escale.com>,
Inki Dae <inki.dae@...sung.com>,
"joe@...ches.com" <joe@...ches.com>,
Russell King <rmk+kernel@....linux.org.uk>,
"djkurtz@...gle.com" <djkurtz@...gle.com>,
"dianders@...gle.com" <dianders@...gle.com>,
"seanpaul@...gle.com" <seanpaul@...gle.com>,
Takashi Iwai <tiwai@...e.de>,
"ajaynumb@...il.com" <ajaynumb@...il.com>,
Andrzej Hajda <a.hajda@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
David Airlie <airlied@...ux.ie>,
Gustavo Padovan <gustavo.padovan@...labora.co.uk>,
Vincent Palatin <vpalatin@...omium.org>,
Mark Yao <mark.yao@...k-chips.com>,
Andy Yan <andy.yan@...k-chips.com>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Kishon Vijay Abraham I <kishon@...com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linux-rockchip@...ts.infradead.org"
<linux-rockchip@...ts.infradead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"jingoohan1@...il.com" <jingoohan1@...il.com>
Subject: Re: [PATCH v3 05/14] drm: bridge/analogix_dp: fix link_rate & lane_count bug
On 2015. 8. 19., at PM 11:50, Yakir Yang <ykk@...k-chips.com> wrote:
>
> link_rate and lane_count already configed in analogix_dp_set_link_train(),
s/configed/configured
Also, the commit name such as "fix ... bug" is not good.
How about following?
drm: bridge/analogix_dp: remove duplicate configuration of link rate and link count
Best regards,
Jingoo Han
> so we don't need to config those repeatly after training finished, just
> remove them out.
>
> Beside Display Port 1.2 already support 5.4Gbps link rate, the maximum sets
> would change from {1.62Gbps, 2.7Gbps} to {1.62Gbps, 2.7Gbps, 5.4Gbps}.
>
> Signed-off-by: Yakir Yang <ykk@...k-chips.com>
> ---
> Changes in v3:
> - Take Thierry Reding suggest, link_rate and lane_count shouldn't config to
> the DT property value directly, but we can take those as hardware limite.
> For example, RK3288 only support 4 physical lanes of 2.7/1.62 Gbps/lane,
> so DT property would like "link-rate = 0x0a" "lane-count = 4".
>
> Changes in v2: None
>
> drivers/gpu/drm/bridge/analogix_dp_core.c | 16 ++++++++--------
> drivers/gpu/drm/bridge/analogix_dp_core.h | 9 +++++----
> 2 files changed, 13 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
> index 480cc13..1778e0a 100644
> --- a/drivers/gpu/drm/bridge/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
> @@ -635,6 +635,8 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
> /*
> * For DP rev.1.1, Maximum link rate of Main Link lanes
> * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
> + * For DP rev.1.2, Maximum link rate of Main Link lanes
> + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
> */
> analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
> *bandwidth = data;
> @@ -668,7 +670,8 @@ static void analogix_dp_init_training(struct analogix_dp_device *dp,
> analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
>
> if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
> - (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
> + (dp->link_train.link_rate != LINK_RATE_2_70GBPS) &&
> + (dp->link_train.link_rate != LINK_RATE_5_40GBPS)) {
> dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
> dp->link_train.link_rate);
> dp->link_train.link_rate = LINK_RATE_1_62GBPS;
> @@ -901,8 +904,8 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
> return;
> }
>
> - ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
> - dp->video_info->link_rate);
> + ret = analogix_dp_set_link_train(dp, dp->video_info->max_lane_count,
> + dp->video_info->max_link_rate);
> if (ret) {
> dev_err(dp->dev, "unable to do link train\n");
> return;
> @@ -912,9 +915,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
> analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
> analogix_dp_enable_enhanced_mode(dp, 1);
>
> - analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
> - analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
> -
> analogix_dp_init_video(dp);
> ret = analogix_dp_config_video(dp);
> if (ret)
> @@ -1198,13 +1198,13 @@ static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
> }
>
> if (of_property_read_u32(dp_node, "analogix,link-rate",
> - &dp_video_config->link_rate)) {
> + &dp_video_config->max_link_rate)) {
> dev_err(dev, "failed to get link-rate\n");
> return ERR_PTR(-EINVAL);
> }
>
> if (of_property_read_u32(dp_node, "analogix,lane-count",
> - &dp_video_config->lane_count)) {
> + &dp_video_config->max_lane_count)) {
> dev_err(dev, "failed to get lane-count\n");
> return ERR_PTR(-EINVAL);
> }
> diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
> index 2cefde9..941b34f 100644
> --- a/drivers/gpu/drm/bridge/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
> @@ -21,8 +21,9 @@
> #define MAX_EQ_LOOP 5
>
> enum link_rate_type {
> - LINK_RATE_1_62GBPS = 0x06,
> - LINK_RATE_2_70GBPS = 0x0a
> + LINK_RATE_1_62GBPS = DP_LINK_BW_1_62,
> + LINK_RATE_2_70GBPS = DP_LINK_BW_2_7,
> + LINK_RATE_5_40GBPS = DP_LINK_BW_5_4,
> };
>
> enum link_lane_count_type {
> @@ -128,8 +129,8 @@ struct video_info {
> enum color_coefficient ycbcr_coeff;
> enum color_depth color_depth;
>
> - enum link_rate_type link_rate;
> - enum link_lane_count_type lane_count;
> + enum link_rate_type max_link_rate;
> + enum link_lane_count_type max_lane_count;
> };
>
> struct link_train {
> --
> 1.9.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists