[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGnW=BbjdAUf5SgRXvNNoamhuVjKC4miBUGSiV_s4+Byb0nzog@mail.gmail.com>
Date: Thu, 20 Aug 2015 11:41:33 +0530
From: punnaiah choudary kalluri <punnaia@...inx.com>
To: Vinod Koul <vinod.koul@...el.com>
Cc: Punnaiah Choudary Kalluri <punnaiah.choudary.kalluri@...inx.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"pawel.moll@....com" <pawel.moll@....com>,
"mark.rutland@....com" <mark.rutland@....com>,
"ijc+devicetree@...lion.org.uk" <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"michal.simek@...inx.com" <michal.simek@...inx.com>,
dan.j.williams@...el.com, dmaengine@...r.kernel.org,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-arm-kernel@...ts.infradead.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Punnaiah Choudary <kpc528@...il.com>
Subject: Re: [PATCH v4 1/2] Documentation: dt: Add Xilinx zynqmp dma device
tree binding documentation
On Thu, Aug 20, 2015 at 11:22 AM, Vinod Koul <vinod.koul@...el.com> wrote:
> On Thu, Aug 06, 2015 at 08:49:32AM +0530, Punnaiah Choudary Kalluri wrote:
>> Device-tree binding documentation for Xilinx zynqmp dma engine used in
>> Zynq UltraScale+ MPSoC.
>>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
>> ---
>> Changes in v4:
>> - None
>> Changes in v3:
>> - None
>> Changes in v2:
>> - None
>> ---
>> .../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 61 ++++++++++++++++++++
>> 1 files changed, 61 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
>>
>> diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
>> new file mode 100644
>> index 0000000..e4f92b9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
>> @@ -0,0 +1,61 @@
>> +Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
>> +memory to device and device to memory transfers. It also has flow
>> +control and rate control support for slave/peripheral dma access.
>> +
>> +Required properties:
>> +- compatible: Should be "xlnx,zynqmp-dma-1.0"
>> +- #dma-cells: Should be <1>, a single cell holding a line request number
>> +- reg: Memory map for module access
>> +- interrupt-parent: Interrupt controller the interrupt is routed through
>> +- interrupts: Should contain DMA channel interrupt
> channel interrupt or interrupts, former says it is plural
ZynqMP DMA has single interrupt for each channel So, that is the reason
i have explicitly mentioned it as interrupt ( not interrupts).
Please let me know if you still want it to be plural.
Regards,
Punnaiah
>
> --
> ~Vinod
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists