[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20150826071236.GS19409@x1>
Date: Wed, 26 Aug 2015 08:12:36 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Peter Griffin <peter.griffin@...aro.org>
Cc: Vinod Koul <vinod.koul@...el.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
srinivas.kandagatla@...il.com, maxime.coquelin@...com,
patrice.chotard@...com, dan.j.williams@...el.com,
devicetree@...r.kernel.org, dmaengine@...r.kernel.org,
ludovic.barre@...com
Subject: Re: [PATCH 1/7] dmaengine: st_fdma: Add STMicroelectronics FDMA DT
binding documentation
On Tue, 25 Aug 2015, Peter Griffin wrote:
> Hi Vinod,
>
> Thanks for reviewing.
>
> On Wed, 19 Aug 2015, Vinod Koul wrote:
>
> > On Wed, Jul 08, 2015 at 05:11:22PM +0100, Peter Griffin wrote:
> > > This patch adds the DT binding documentation for the FDMA constroller
> > > found on STi based chipsets from STMicroelectronics.
> > >
> > > Signed-off-by: Ludovic Barre <ludovic.barre@...com>
> > > Signed-off-by: Peter Griffin <peter.griffin@...aro.org>
> > > ---
> > > Documentation/devicetree/bindings/dma/st_fdma.txt | 76 +++++++++++++++++++++++
> > > 1 file changed, 76 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
> > > new file mode 100644
> > > index 0000000..1ec7470
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
> > > @@ -0,0 +1,76 @@
> > > +* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
> > > +
> > > +The FDMA is a general-purpose direct memory access controller capable of
> > > +supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
> > > +The FDMA is based on a Slim processor which require a firmware.
> > > +
> > > +* FDMA Controller
> > > +
> > > +Required properties:
> > > +- compatible : Should be "st,fdma_mpe31"
> > > +- reg : Should contain DMA registers location and length
> > > +- interrupts : Should contain one interrupt shared by all channel
> >
> > s/channel/channels
>
> Will fix in v2.
>
> >
> > > +- dma-channels : Number of channels supported by the controller
> > > +- #dma-cells : Must be <3>.
> >
> > any reason three?
>
> Yes, it is documented further down in the file under DMA Client.
>
> To make it clearer in V2 I could change to
>
> "- #dma-cells : Must be <3>. See DMA client section below"?
- #dma-cells : Must be <3>
1st cell: Phandle to ... <blah>
2nd cell: DMA channel ... <blah>
3rd cell: Flags describing ... <blah>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists