[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1440576450-17420-1-git-send-email-antoine.tenart@free-electrons.com>
Date: Wed, 26 Aug 2015 10:07:25 +0200
From: Antoine Tenart <antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com, thierry.reding@...il.com
Cc: Antoine Tenart <antoine.tenart@...e-electrons.com>,
zmxu@...vell.com, jszhang@...vell.com,
linux-arm-kernel@...ts.infradead.org, linux-pwm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v5 0/5] ARM: berlin: PWM support
Hi all,
This series adds a driver for the Marvell Berlin PWM controller, which
has 4 channels.
This has been tested on a BG2Q DMP.
Thanks,
Antoine
Changes since v4:
- Reworked _remove()
- Reworked _enable()
Changes since v3:
- Use readl_relaxed
- Reworked the clk enable / clk disable calls
- Removed BERLIN_PWM_DISABLE
Changes since v2:
- Reworked the prescaler/tcnt calculation
- Added an input clock
- Updated the documentation
- Reordered the pwm node
- Added some definition for BIT()
Changes since v1:
- Added a sentinel in berlin_pwm_match[]
Antoine Tenart (5):
pwm: add the Berlin pwm controller driver
Documentation: bindings: document the Berlin PWM driver
ARM: berlin: add a PWM node on the BG2Q
ARM: berlin: add a PWM node on the BG2
ARM: berlin: add a PWM node on the BG2CD
.../devicetree/bindings/pwm/pwm-berlin.txt | 19 ++
arch/arm/boot/dts/berlin2.dtsi | 7 +
arch/arm/boot/dts/berlin2cd.dtsi | 7 +
arch/arm/boot/dts/berlin2q.dtsi | 7 +
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-berlin.c | 227 +++++++++++++++++++++
7 files changed, 277 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-berlin.txt
create mode 100644 drivers/pwm/pwm-berlin.c
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists