Message-ID: <CACT4Y+aPdSJAnYAVcQt96Oc71nKZB7Hu7cd960K97QYCUPwcFQ@mail.gmail.com>
Date:	Wed, 26 Aug 2015 12:08:24 +0200
From:	Dmitry Vyukov <dvyukov@...gle.com>
To:	Peter Hurley <peter@...leysoftware.com>
Cc:	Andrey Konovalov <andreyknvl@...gle.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Jiri Slaby <jslaby@...e.cz>, linux-serial@...r.kernel.org,
	LKML <linux-kernel@...r.kernel.org>,
	Alexander Potapenko <glider@...gle.com>,
	Kostya Serebryany <kcc@...gle.com>
Subject: Re: Potential data race in uart_ioctl

On Tue, Aug 25, 2015 at 10:58 PM, Peter Hurley <peter@...leysoftware.com> wrote:
>>>>>>> Hi!
>>>>>>>
>>>>>>> We are working on a dynamic data race detector for the Linux kernel
>>>>>>> called KernelThreadSanitizer (ktsan)
>>>>>>> (https://github.com/google/ktsan/wiki).
>>>>>>>
>>>>>>> While booting the kernel (upstream revision 21bdb584af8c) we got a report:
>>>>>>>
>>>>>>> ==================================================================
>>>>>>> ThreadSanitizer: data-race in uart_ioctl
>>>>>>>
>>>>>>> Read of size 8 by thread T424 (K971):
>>>>>>>  [<ffffffff81673c56>] uart_ioctl+0x36/0x11e0
>>>>>>> drivers/tty/serial/serial_core.c:1216
>>>>>>>  [<ffffffff81643802>] tty_ioctl+0x4f2/0x11d0 drivers/tty/tty_io.c:2924
>>>>>>>  [<     inlined    >] do_vfs_ioctl+0x44a/0x750 vfs_ioctl fs/ioctl.c:43
>>>>>>>  [<ffffffff8127b0ca>] do_vfs_ioctl+0x44a/0x750 fs/ioctl.c:607
>>>>>>>  [<     inlined    >] SyS_ioctl+0x79/0xa0 SYSC_ioctl fs/ioctl.c:622
>>>>>>>  [<ffffffff8127b449>] SyS_ioctl+0x79/0xa0 fs/ioctl.c:613
>>>>>>>  [<ffffffff81eae0ae>] entry_SYSCALL_64_fastpath+0x12/0x71
>>>>>>> arch/x86/entry/entry_64.S:186
>>>>>>> DBG: cpu = ffff88063fc1fe68
>>>>>>> DBG: cpu id = 0
>>>>>>>
>>>>>>> Previous write of size 8 by thread T422 (K970):
>>>>>>>  [<ffffffff816737ef>] uart_open+0x12f/0x220
>>>>>>> drivers/tty/serial/serial_core.c:1629
>>>>>>>  [<ffffffff81645be2>] tty_open+0x192/0x8f0 drivers/tty/tty_io.c:2105
>>>>>>>  [<ffffffff812628fc>] chrdev_open+0x13c/0x290 fs/char_dev.c:388
>>>>>>>  [<ffffffff812582fc>] do_dentry_open+0x3ac/0x550 fs/open.c:736
>>>>>>>  [<ffffffff81259d68>] vfs_open+0xb8/0xe0 fs/open.c:853
>>>>>>>  [<     inlined    >] path_openat+0x81c/0x2440 do_last fs/namei.c:3163
>>>>>>>  [<ffffffff81272f1c>] path_openat+0x81c/0x2440 fs/namei.c:3295
>>>>>>>  [<ffffffff8127656a>] do_filp_open+0xfa/0x170 fs/namei.c:3330
>>>>>>>  [<ffffffff8125a243>] do_sys_open+0x183/0x2b0 fs/open.c:1025
>>>>>>>  [<     inlined    >] SyS_open+0x35/0x50 SYSC_open fs/open.c:1043
>>>>>>>  [<ffffffff8125a3a5>] SyS_open+0x35/0x50 fs/open.c:1038
>>>>>>>  [<ffffffff81eae0ae>] entry_SYSCALL_64_fastpath+0x12/0x71
>>>>>>> arch/x86/entry/entry_64.S:186
>>>>>>> DBG: cpu = ffff88063fd1fe68
>>>>>>>
>>>>>>> DBG: addr: ffff8801d2a0ce88
>>>>>>> DBG: first offset: 0, second offset: 0
>>>>>>> DBG: T424 clock: {T424: 211057, T422: 275728}
>>>>>>> DBG: T422 clock: {T422: 275819}
>>>>>>> ==================================================================
>>>>>>>
>>>>>>> It seems that one thread reads and uses tty->driver_data while it's
>>>>>>> being initialized in another one. The second thread holds port->mutex,
>>>>>>> but the first one does a few accesses to tty->driver_data before
>>>>>>> locking it.
>>>>>>>
>>>>>>> Could you confirm if this is a real race?
>>>>>>
>>>>>> Although I don't understand what triggers ktsan to signal a race
>>>>>> condition, this doesn't appear to be an actual race.
>>>>>>
>>>>>> For an ioctl() syscall to act on any given tty requires a successful
>>>>>> open() syscall to have nearly completed (do_sys_open() => fd_install()
>>>>>> initializes the file descriptor; ioctl() => fdget() derefs the descriptor).
>>>>>>
>>>>>> Perhaps what's tripping the race detection is that 2nd and subsequent
>>>>>> opens also (redundantly) write the same values as from the first open?
>>>>>
>>>>> Since we use a fuzzer, yes, it is possible that open is called twice.
>>>>
>>>> Oh, no, sorry, this happens during booting.
>>>> The race is on tty_struct, which is probably shared between several
>>>> file descriptors.
>>>
>>> Yep, but there is 1:1 correspondence between tty_struct and uart_state;
>>> so once the first open() initializes tty->driver_data, subsequent opens
>>> are just re-writing the same value for tty->driver_data.
>>>
>>> Is ktsan just triggering on the fact there is a memory write, without
>>> checking the value has changed?
>>
>> Yes, that is correct. Ktsan is based on C memory model which says that
>> any write racing with other memory access leads to undefined behavior.
>
> The Linux kernel largely ignores the C memory model definition, and
> relies on practical compiler behavior.
>
> So-called 'data races' are common in kernel code.

Yeah, I know. But the problem is that with the kernel model it is not
possible to automatically find real harmful race conditions, so we
have to stick with something that allows that.


>> As far as I see the setup is quite complex and not just writes to
>> tty->driver_data.
>
> Yes, vfs => tty => serial core => uart driver is a (necessarily) complicated
> stack.
>
>> For example, it also calls uart_startup which does
>> set_bit(TTY_IO_ERROR, &tty->flags) on the tty. Can't that lead to some
>> issues?
>
> No.
>
>> E.g. we set TTY_IO_ERROR, but since tty is already used by
>> other threads, operations on the tty in other threads will spuriously
>> fail.
>
> See below.
>
>> 195 static int uart_startup(struct tty_struct *tty, struct uart_state *state,
>> 196                 int init_hw)
>> 197 {
>> 198         struct tty_port *port = &state->port;
>> 199         int retval;
>> 200
>> 201         if (port->flags & ASYNC_INITIALIZED)
>> 202                 return 0;
>
> Subsequent opens return success here (note below how the ASYNCB_INITIALIZED bit
> is set in tty->flags if uart_port_startup() returned success from the earlier
> open ?)


Ah, OK, we will mark this data race as intentional then. Thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists