[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <cover.1440580764.git.cyrille.pitchen@atmel.com>
Date: Wed, 26 Aug 2015 14:30:22 +0200
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
To: <nicolas.ferre@...el.com>, <broonie@...nel.org>,
<linux-spi@...r.kernel.org>, <dwmw2@...radead.org>,
<computersforpeace@...il.com>, <zajec5@...il.com>,
<beanhuo@...ron.com>, <juhosg@...nwrt.org>, <marex@...x.de>,
<shijie.huang@...el.com>, <ben@...adent.org.uk>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux-mtd@...ts.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH linux-next v5 0/5] add driver for Atmel QSPI controller
ChangeLog
v5:
- remove unused inline functions qspi_read[bw]() and qspi_write[bw](),
keep only qspi_readl() and qspi_writel().
- use reinit_completion() instead of init_completion() during run time,
call init_completion() once for all in the probe().
- add a dev_warn() when trying to tune the number of dummy cycles for
spi-nor of a not supported manufacturer then fall back to the default
framework value.
- reword some comments.
- add "Acked-by: Marek Vasut <marex@...x.de>" for patches 1 and 4.
- add "Acked-by: Bean Huo <beanhuo@...ron.com>" for patch 1.
v4:
- add "OF && HAS_DMA" dependency in Kconfig for Atmel Quad SPI driver.
- return -ENOMEM instead of the return code of dma_mapping_error() as this
function returns a boolean on ARM achitecture.
- add "Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>" for Atmel Quad
SPI driver and its DT binding documentation.
v3:
- reword the comment which explains that spi_nor_set_protocol() is used by
the spi-nor framework to notify lower layers, especially the (Q)SPI
controller about a protocol change.
- change the definitions of register/bitfield macros in the Atmel QSPI
controller driver: get rid of concatenation operator and use BIT and
GENMASK macros when possible.
- use #define[SPACE] instead of #define[TAB]
v2:
- remove the patches to set the "latency code" of Spansion QSPI memories
(support of Spansion memories may be submitted in later series).
- rename "qspi" node into "spi" in the DT example to fit ePAPR standard.
- remove the useless "qspi0" label from the DT node example.
- remove the leading 0 from the size of the second memory region to make
it consistent with the size of the first memory region.
- indent the DT bindings documentation to make it more readable.
- remove the useless ".bus = &platform_bus_type," line from the
platform driver definition.
v1:
This series of patches add support for the new Atmel QSPI controller
embedded inside sama5d2x SoCs.
These patches were first developped for linux-3.18-at91 and tested on a
sama5d27 Xplained ultra board, which embeds a Micron n25q128a13 QSPI NOR
flash memory. Then the series was adapted for mainline.
Cyrille Pitchen (5):
mtd: spi-nor: notify (Q)SPI controller about protocol change
Documentation: mtd: add a DT property to set the number of dummy
cycles
mtd: spi-nor: allow to tune the number of dummy cycles
Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
mtd: atmel-quadspi: add driver for Atmel QSPI controller
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 +
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 6 +
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/atmel-quadspi.c | 859 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 123 ++-
include/linux/mtd/spi-nor.h | 15 +
7 files changed, 1021 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists