[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1440594483-29601-2-git-send-email-lee.jones@linaro.org>
Date: Wed, 26 Aug 2015 14:08:00 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: kernel@...inux.com, ohad@...ery.com, devicetree@...r.kernel.org,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 1/4] remoteproc: dt: Provide bindings for ST's Remote Processor Controller driver
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
.../devicetree/bindings/remoteproc/st-rproc.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/st-rproc.txt
diff --git a/Documentation/devicetree/bindings/remoteproc/st-rproc.txt b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
new file mode 100644
index 0000000..6a933c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/st-rproc.txt
@@ -0,0 +1,38 @@
+STMicroelectronics Remote Processor
+-----------------------------------
+
+This binding provides support for adjunct processors found on ST SoCs.
+
+The remote processors can be controlled from the bootloader or the primary OS.
+If the bootloader starts a remote processor processor the primary OS must detect
+its state and act accordingly.
+
+The node name is significant, as it defines the name of the CPU and the name
+of the firmware to load: "rproc-<name>-fw".
+
+Required properties:
+- compatible Should be one of:
+ "st,st231-rproc"
+ "st,st40-rproc"
+- reg Size and length of reserved co-processor memory
+- resets Reset lines (See: ../reset/reset.txt)
+- reset-names Must be "sw_reset" and "pwr_reset"
+- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-names Must be "rproc_clk"
+- clock-frequency Clock frequency to set co-processor at if the bootloader
+ hasn't already done so
+- st,syscfg-boot The register that holds the boot vector for the co-processor
+
+Example:
+
+ st231-audio@...00000 {
+ compatible = "st,st231-rproc";
+ reg = <0xbae00000 0x01000000>;
+ reg-names = "rproc_mem";
+ resets = <&softreset STIH407_ST231_AUD_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_AUD_0>;
+ clock-names = "rproc_clk";
+ clock-frequency = <600000000>;
+ st,syscfg-boot = <&syscfg_core 0x228>;
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists