linux-kernel - Re: [PATCH] gpio: vf610: handle level IRQ's properly

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <99db8c092e8b54d485e88887630d51c0@agner.ch>
Date:	Wed, 26 Aug 2015 10:11:25 -0700
From:	Stefan Agner <stefan@...er.ch>
To:	Linus Walleij <linus.walleij@...aro.org>
Cc:	Alexandre Courbot <gnurou@...il.com>, linux-gpio@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] gpio: vf610: handle level IRQ's properly

On 2015-08-26 05:47, Linus Walleij wrote:
> On Sat, Aug 22, 2015 at 12:56 AM, Stefan Agner <stefan@...er.ch> wrote:
> 
>> The GPIO IRQ controller is able to generate level triggered
>> interrupts, however, these were handled by handle_simple_irq so far
>> which did not take care of IRQ masking. This lead to "nobody cared
>> (try booting with the "irqpoll" option)" stack traces.
>>
>> Use the generic interrupt handlers depending on the IRQ type.
>>
>> Signed-off-by: Stefan Agner <stefan@...er.ch>
> 
> Patch applied.

Thx

 
> Hm, this looks like a problem that could exist in a few more
> GPIO drivers. Can you look around and see if there is something
> immediately suspicious in drivers/gpio?

Just looked a bit around. There are some which use handle_simple_irq but
also run their handler in threaded/one-shot handler. I guess in that
case it is fine to use the simple_irq handler.

However, those GPIO drivers look suspicious:

gpio-altera.c: Uses handle_simple_irq, supports edge and level
gpio-bcm-kona.c: Uses handle_simple_irq, supports only edge
gpio-grgpio.c: Uses handle_simple_irq, supports edge and level
gpio-intel-mid.c: Uses handle_simple_irq, supports only edge
gpio-lynxpoint.c: Uses handle_simple_irq, supports edge and level
gpio-ml-ioh.c: Uses handle_simple_irq, supports edge and level
gpio-pl061.c: Uses handle_simple_irq, supports edge and level
gpio-rcar.c: Uses handle_level_irq, supports edge and level
gpio-timberdale.c: Uses handle_simple_irq, supports edge and level

--
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/