Message-ID: <1441011520-15424-2-git-send-email-qiang.zhao@freescale.com>
Date:	Mon, 31 Aug 2015 16:58:39 +0800
From:	Zhao Qiang <qiang.zhao@...escale.com>
To:	<scottwood@...escale.com>
CC:	<linux-kernel@...r.kernel.org>, <linuxppc-dev@...ts.ozlabs.org>,
	<lauraa@...eaurora.org>, <X.xie@...escale.com>,
	<benh@...nel.crashing.org>, <leoli@...escale.com>,
	<paulus@...ba.org>, Zhao Qiang <qiang.zhao@...escale.com>
Subject: [PATCH V7 2/3] qe_common: add qe_muram_ functions to manage muram

muram is used for qe, add qe_muram_ functions to manage
muram.

Signed-off-by: Zhao Qiang <qiang.zhao@...escale.com>
---
Changes for v2:
	- no changes
Changes for v3:
	- no changes
Changes for v4:
	- no changes
Changes for v5:
	- no changes
Changes for v6:
	- using genalloc instead rheap to manage QE MURAM
	- remove qe_reset from platform file, using 
	- subsys_initcall to call qe_init function.
Changes for v7:
	- move this patch from 3/3 to 2/3
	- convert cpm with genalloc
	- check for gen_pool allocation failure

 arch/powerpc/include/asm/cpm.h            |  43 ------
 arch/powerpc/include/asm/qe.h             |  51 ++++++-
 arch/powerpc/platforms/83xx/km83xx.c      |   2 -
 arch/powerpc/platforms/83xx/mpc832x_mds.c |   2 -
 arch/powerpc/platforms/83xx/mpc832x_rdb.c |   2 -
 arch/powerpc/platforms/83xx/mpc836x_mds.c |   2 -
 arch/powerpc/platforms/83xx/mpc836x_rdk.c |   3 -
 arch/powerpc/platforms/85xx/common.c      |   1 -
 arch/powerpc/platforms/Kconfig            |   1 +
 arch/powerpc/sysdev/cpm_common.c          | 141 +------------------
 arch/powerpc/sysdev/qe_lib/Makefile       |   2 +-
 arch/powerpc/sysdev/qe_lib/qe.c           |  15 ++
 arch/powerpc/sysdev/qe_lib/qe_common.c    | 222 ++++++++++++++++++++++++++++++
 13 files changed, 284 insertions(+), 203 deletions(-)
 create mode 100644 arch/powerpc/sysdev/qe_lib/qe_common.c

diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4398a6c..05a1c15 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -155,49 +155,6 @@ typedef struct cpm_buf_desc {
  */
 #define BD_I2C_START		(0x0400)
 
-int cpm_muram_init(void);
-
-#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-#else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
-					    unsigned long align)
-{
-	return -ENOSYS;
-}
-
-static inline int cpm_muram_free(unsigned long offset)
-{
-	return -ENOSYS;
-}
-
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
-						  unsigned long size)
-{
-	return -ENOSYS;
-}
-
-static inline void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return NULL;
-}
-
-static inline unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return -ENOSYS;
-}
-
-static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return 0;
-}
-#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
-
 #ifdef CONFIG_CPM
 int cpm_command(u32 command, u8 opcode);
 #else
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 32b9bfa..35257c8 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -16,10 +16,13 @@
 #define _ASM_POWERPC_QE_H
 #ifdef __KERNEL__
 
+#include <linux/compiler.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <asm/cpm.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
 #include <asm/immap_qe.h>
 
 #define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
@@ -187,12 +190,25 @@ static inline int qe_alive_during_sleep(void)
 }
 
 /* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
+#define cpm_muram_init qe_muram_init
+#define cpm_muram_alloc qe_muram_alloc
+#define cpm_muram_alloc_fixed qe_muram_alloc_fixed
+#define cpm_muram_free qe_muram_free
+#define cpm_muram_addr qe_muram_addr
+#define cpm_muram_offset qe_muram_offset
+
+int qe_muram_init(void);
+
+#if defined(CONFIG_QUICC_ENGINE)
+unsigned long qe_muram_alloc_common(unsigned long size, unsigned long align,
+		unsigned long offset);
+unsigned long qe_muram_alloc(unsigned long size, unsigned long align);
+unsigned long qe_muram_alloc_fixed(unsigned long offset, unsigned long size);
+int qe_muram_free(unsigned long offset);
+void __iomem *qe_muram_addr(unsigned long offset);
+unsigned long qe_muram_offset(void __iomem *addr);
+dma_addr_t qe_muram_dma(void __iomem *addr);
+#endif /* defined(CONFIG_QUICC_ENGINE) */
 
 /* Structure that defines QE firmware binary files.
  *
@@ -266,6 +282,27 @@ struct qe_bd {
 #define BD_STATUS_MASK	0xffff0000
 #define BD_LENGTH_MASK	0x0000ffff
 
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
+#define BD_SC_READY	(0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	(0x0400)	/* Transmit CRC */
+#define BD_SC_CM	(0x0200)	/* Continuous mode */
+#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		(0x0100)	/* xmt preamble */
+#define BD_SC_BR	(0x0020)	/* Break received */
+#define BD_SC_FR	(0x0010)	/* Framing error */
+#define BD_SC_PR	(0x0008)	/* Parity error */
+#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	(0x0002)	/* Overrun */
+#define BD_SC_UN	(0x0002)	/* Underrun */
+#define BD_SC_CD	(0x0001)	/* */
+#define BD_SC_CL	(0x0001)	/* Collision */
+
 /* Alignment */
 #define QE_INTR_TABLE_ALIGN	16	/* ??? */
 #define QE_ALIGNMENT_OF_BD	8
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index bf4c447..ae111581 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -136,8 +136,6 @@ static void __init mpc83xx_km_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	np = of_find_node_by_name(NULL, "par_io");
 	if (np != NULL) {
 		par_io_init(np);
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 8d76220..aacc43f 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -74,8 +74,6 @@ static void __init mpc832x_sys_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index eff5baa..0c7a43e 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -203,8 +203,6 @@ static void __init mpc832x_rdb_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 1a26d2f..eb24abd 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -82,8 +82,6 @@ static void __init mpc836x_mds_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b63b42d..823e370 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -35,9 +35,6 @@ static void __init mpc836x_rdk_setup_arch(void)
 		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
 
 	mpc83xx_setup_pci();
-#ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-#endif
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 7bfb9b1..0f91edc 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -105,7 +105,6 @@ void __init mpc85xx_qe_init(void)
 		return;
 	}
 
-	qe_reset();
 	of_node_put(np);
 
 }
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index b7f9c40..01f98a2 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -276,6 +276,7 @@ config QUICC_ENGINE
 	bool "Freescale QUICC Engine (QE) Support"
 	depends on FSL_SOC && PPC32
 	select PPC_LIB_RHEAP
+	select GENERIC_ALLOCATOR
 	select CRC32
 	help
 	  The QUICC Engine (QE) is a new generation of communications
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 4f78695..328c3ec 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -27,8 +27,8 @@
 
 #include <asm/udbg.h>
 #include <asm/io.h>
-#include <asm/rheap.h>
 #include <asm/cpm.h>
+#include <asm/qe.h>
 
 #include <mm/mmu_decl.h>
 
@@ -65,151 +65,12 @@ void __init udbg_init_cpm(void)
 }
 #endif
 
-static spinlock_t cpm_muram_lock;
-static rh_block_t cpm_boot_muram_rh_block[16];
-static rh_info_t cpm_muram_info;
 static u8 __iomem *muram_vbase;
 static phys_addr_t muram_pbase;
 
 /* Max address size we deal with */
 #define OF_MAX_ADDR_CELLS	4
 
-int cpm_muram_init(void)
-{
-	struct device_node *np;
-	struct resource r;
-	u32 zero[OF_MAX_ADDR_CELLS] = {};
-	resource_size_t max = 0;
-	int i = 0;
-	int ret = 0;
-
-	if (muram_pbase)
-		return 0;
-
-	spin_lock_init(&cpm_muram_lock);
-	/* initialize the info header */
-	rh_init(&cpm_muram_info, 1,
-	        sizeof(cpm_boot_muram_rh_block) /
-	        sizeof(cpm_boot_muram_rh_block[0]),
-	        cpm_boot_muram_rh_block);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
-	if (!np) {
-		/* try legacy bindings */
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			printk(KERN_ERR "Cannot find CPM muram data node");
-			ret = -ENODEV;
-			goto out;
-		}
-	}
-
-	muram_pbase = of_translate_address(np, zero);
-	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
-		printk(KERN_ERR "Cannot translate zero through CPM muram node");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	while (of_address_to_resource(np, i++, &r) == 0) {
-		if (r.end > max)
-			max = r.end;
-
-		rh_attach_region(&cpm_muram_info, r.start - muram_pbase,
-				 resource_size(&r));
-	}
-
-	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
-	if (!muram_vbase) {
-		printk(KERN_ERR "Cannot map CPM muram");
-		ret = -ENOMEM;
-	}
-
-out:
-	of_node_put(np);
-	return ret;
-}
-
-/**
- * cpm_muram_alloc - allocate the requested size worth of multi-user ram
- * @size: number of bytes to allocate
- * @align: requested alignment, in bytes
- *
- * This function returns an offset into the muram area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = align;
-	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	memset(cpm_muram_addr(start), 0, size);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc);
-
-/**
- * cpm_muram_free - free a chunk of multi-user ram
- * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
- */
-int cpm_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	ret = rh_free(&cpm_muram_info, offset);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_muram_free);
-
-/**
- * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
- * @offset: the offset into the muram area to reserve
- * @size: the number of bytes to reserve
- *
- * This function returns "start" on success, -ENOMEM on failure.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = 1;
-	start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-
-/**
- * cpm_muram_addr - turn a muram offset into a virtual address
- * @offset: muram offset to convert
- */
-void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return muram_vbase + offset;
-}
-EXPORT_SYMBOL(cpm_muram_addr);
-
-unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return addr - (void __iomem *)muram_vbase;
-}
-EXPORT_SYMBOL(cpm_muram_offset);
-
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index f1855c1..9507a27 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux ppc-specific parts of QE
 #
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
 
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index c2518cd..3f9f596 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -671,6 +671,21 @@ unsigned int qe_get_num_of_snums(void)
 }
 EXPORT_SYMBOL(qe_get_num_of_snums);
 
+static int __init qe_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np) {
+		pr_err("%s: Could not find Quicc Engine node\n", __func__);
+		return -ENODEV;
+	}
+	qe_reset();
+	of_node_put(np);
+	return 0;
+}
+subsys_initcall(qe_init);
+
 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
 static int qe_resume(struct platform_device *ofdev)
 {
diff --git a/arch/powerpc/sysdev/qe_lib/qe_common.c b/arch/powerpc/sysdev/qe_lib/qe_common.c
new file mode 100644
index 0000000..55079b9
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/qe_common.c
@@ -0,0 +1,222 @@
+/*
+ * Freescale QE common code
+ *
+ * Author: Zhao Qiang  <qiang.zhao@...escale.com>
+ *
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/genalloc.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+#include <asm/qe.h>
+
+static struct gen_pool *muram_pool;
+static struct genpool_data_align muram_pool_data;
+static spinlock_t qe_muram_lock;
+static u8 __iomem *muram_vbase;
+static phys_addr_t muram_pbase;
+
+struct muram_block {
+	struct list_head head;
+	unsigned long start;
+	int size;
+};
+
+static LIST_HEAD(muram_block_list);
+
+/* max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+#define GENPOOL_OFFSET		4096
+
+int qe_muram_init(void)
+{
+	struct device_node *np;
+	struct resource r;
+	u32 zero[OF_MAX_ADDR_CELLS] = {};
+	resource_size_t max = 0;
+	int i = 0;
+	int ret = 0;
+
+	if (muram_pbase)
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
+	if (!np) {
+		/* try legacy bindings */
+		np = of_find_node_by_name(NULL, "data-only");
+		if (!np) {
+			pr_err("Cannot find CPM muram data node");
+			ret = -ENODEV;
+			goto out;
+		}
+	}
+
+	muram_pool = gen_pool_create(1, -1);
+	gen_pool_set_algo(muram_pool, gen_pool_first_fit_align,
+			  &muram_pool_data);
+
+	muram_pbase = of_translate_address(np, zero);
+	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
+		pr_err("Cannot translate zero through CPM muram node");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	while (of_address_to_resource(np, i++, &r) == 0) {
+		if (r.end > max)
+			max = r.end;
+		ret = gen_pool_add(muram_pool, r.start - muram_pbase +
+				   GENPOOL_OFFSET, resource_size(&r), -1);
+		if (ret) {
+				pr_err("QE: couldn't add muram to pool!\n");
+				goto err;
+			}
+
+	}
+
+	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
+	if (!muram_vbase) {
+		pr_err("Cannot map QE muram");
+		ret = -ENOMEM;
+		goto err;
+	}
+	goto out;
+err:
+	gen_pool_destroy(muram_pool);
+out:
+	of_node_put(np);
+	return ret;
+}
+
+/*
+ * qe_muram_alloc - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ *
+ * This function returns an offset into the muram area.
+ */
+unsigned long qe_muram_alloc(unsigned long size, unsigned long align)
+{
+	return qe_muram_alloc_common(size, align, 0);
+}
+EXPORT_SYMBOL(qe_muram_alloc);
+
+/*
+ * qe_muram_alloc_fixed - reserve a specific region of multi-user ram
+ * @size: number of bytes to allocate
+ * @offset: offset of allocation start address
+ *
+ * This function returns an offset into the muram area.
+ */
+unsigned long qe_muram_alloc_fixed(unsigned long offset, unsigned long size)
+{
+	return qe_muram_alloc_common(size, 1, offset);
+}
+EXPORT_SYMBOL(qe_muram_alloc_fixed);
+
+/*
+ * qe_muram_alloc_common - allocate the requested size worth of multi-user ram
+ * @size: number of bytes to allocate
+ * @align: requested alignment, in bytes
+ * @offset: offset of allocation start address
+ *
+ * This function returns an offset into the muram area.
+ */
+unsigned long qe_muram_alloc_common(unsigned long size, unsigned long align,
+		unsigned long offset)
+{
+	unsigned long start;
+	unsigned long flags;
+	struct muram_block *entry;
+
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	muram_pool_data.align = align;
+	muram_pool_data.offset = offset;
+	start = gen_pool_alloc(muram_pool, size);
+	if (!start)
+		goto out2;
+	start = start - GENPOOL_OFFSET;
+	memset(qe_muram_addr(start), 0, size);
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		goto out1;
+	entry->start = start;
+	entry->size = size;
+	list_add(&entry->head, &muram_block_list);
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return start;
+out1:
+	gen_pool_free(muram_pool, start, size);
+out2:
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+	return (unsigned long) -ENOMEM;
+}
+EXPORT_SYMBOL(qe_muram_alloc_common);
+
+/**
+ * qe_muram_free - free a chunk of multi-user ram
+ * @offset: The beginning of the chunk as returned by qe_muram_alloc().
+ */
+int qe_muram_free(unsigned long offset)
+{
+	unsigned long flags;
+	int size;
+	struct muram_block *tmp;
+
+	size = 0;
+	spin_lock_irqsave(&qe_muram_lock, flags);
+	list_for_each_entry(tmp, &muram_block_list, head) {
+		if (tmp->start == offset) {
+			size = tmp->size;
+			list_del(&tmp->head);
+			kfree(tmp);
+			break;
+		}
+	}
+	gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size);
+	spin_unlock_irqrestore(&qe_muram_lock, flags);
+
+	return size;
+}
+EXPORT_SYMBOL(qe_muram_free);
+
+/**
+ * qe_muram_addr - turn a muram offset into a virtual address
+ * @offset: muram offset to convert
+ */
+void __iomem *qe_muram_addr(unsigned long offset)
+{
+	return muram_vbase + offset;
+}
+EXPORT_SYMBOL(qe_muram_addr);
+
+unsigned long qe_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(qe_muram_offset);
+
+/**
+ * qe_muram_dma - turn a muram virtual address into a DMA address
+ * @offset: virtual address from qe_muram_addr() to convert
+ */
+dma_addr_t qe_muram_dma(void __iomem *addr)
+{
+	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+}
+EXPORT_SYMBOL(qe_muram_dma);
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists