[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1441045446-30858-9-git-send-email-heiko@sntech.de>
Date: Mon, 31 Aug 2015 20:24:06 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: ulf.hansson@...aro.org, mturquette@...libre.com,
sboyd@...eaurora.org, tgih.jun@...sung.com, jh80.chung@...sung.com
Cc: linux-mmc@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Heiko Stuebner <heiko@...ech.de>
Subject: [PATCH 8/8] ARM: dts: rockchip: add tuning related settings to veyron devices
This allows the tuning code to run and use higher speeds on capable cards.
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 7 ++++++-
arch/arm/boot/dts/rk3288-veyron.dtsi | 6 ++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index b5334ec..24a7a11 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -90,7 +90,7 @@
regulators {
vccio_sd: LDO_REG4 {
regulator-name = "vccio_sd";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -116,7 +116,12 @@
cap-sd-highspeed;
card-detect-delay = <200>;
cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ default-sample-phase = <90>;
num-slots = <1>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc33_sd>;
vqmmc-supply = <&vccio_sd>;
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index df7d70d..394aa80 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -194,7 +194,9 @@
broken-cd;
bus-width = <8>;
cap-mmc-highspeed;
+ default-sample-phase = <158>;
disable-wp;
+ mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
non-removable;
num-slots = <1>;
@@ -409,6 +411,10 @@
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc33_sys>;
vqmmc-supply = <&vcc18_wl>;
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists