[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1441139486.12163.3.camel@perches.com>
Date: Tue, 01 Sep 2015 13:31:26 -0700
From: Joe Perches <joe@...ches.com>
To: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
Cc: linux-mmc@...r.kernel.org, ulf.hansson@...aro.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/2] mmc: sdhci-pxav3: Fix tabbing issue
On Wed, 2015-09-02 at 00:54 +0530, Vaibhav Hiremath wrote:
> There were some coding style issues where spaces have been used instead
> of tabs, for example, in macro definitions, alignment of function
> declarations/definitions, etc...
>
> This patch fixes all such occurrences in the code.
> And also use BIT for bit definitions.
Please send 2 patches instead.
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
[]
> @@ -128,7 +133,7 @@ static int mv_conf_mbus_windows(struct platform_device *pdev,
> }
>
> static int armada_38x_quirks(struct platform_device *pdev,
> - struct sdhci_host *host)
> + struct sdhci_host *host)
This is not an improvement.
The old code is aligned to the open parenthesis
and is fine.
> @@ -284,10 +288,10 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> * FE-2946959
> */
> if (pxa->sdio3_conf_reg) {
> - u8 reg_val = readb(pxa->sdio3_conf_reg);
> + u8 reg_val = readb(pxa->sdio3_conf_reg);
>
> if (uhs == MMC_TIMING_UHS_SDR50 ||
> - uhs == MMC_TIMING_UHS_DDR50) {
> + uhs == MMC_TIMING_UHS_DDR50) {
Also not an improvement.
> @@ -304,20 +308,20 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> }
>
> static const struct sdhci_ops pxav3_sdhci_ops = {
> - .set_clock = sdhci_set_clock,
> - .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = pxav3_reset,
> - .set_uhs_signaling = pxav3_set_uhs_signaling,
> + .set_clock = sdhci_set_clock,
> + .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = pxav3_reset,
> + .set_uhs_signaling = pxav3_set_uhs_signaling,
<shrug> If you want.
> };
>
> static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
> - .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
Also not an improvement. Why change the space to a tab here?
> @@ -343,7 +347,7 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
> return NULL;
>
> if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
> - &clk_delay_cycles))
> + &clk_delay_cycles))
Not an improvement, etc...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists