linux-kernel - Re: [RFC 3/3] mmc: sdhci-pxav3: Add ->voltage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55E70877.70504@linaro.org>
Date:	Wed, 2 Sep 2015 20:02:23 +0530
From:	Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
To:	Shawn Lin <shawn.lin@...k-chips.com>, linux-mmc@...r.kernel.org
Cc:	ulf.hansson@...aro.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [RFC 3/3] mmc: sdhci-pxav3: Add ->voltage_switch callback support



On Wednesday 02 September 2015 07:21 PM, Shawn Lin wrote:
> On 2015/9/2 3:32, Vaibhav Hiremath wrote:
>> In case PXA1928 family of devices, there is device/controller specific
>> configuration to control voltage/power on the IO pins.
>>
>> This patch implements and enables the sdhci_ops->voltage_switch()
>> callback api.
>> Note that IO pad register addresses are fetched as a memory resource.
>>
>> For example, in case of PXA1928 and family of devices, the DT property
>> would look something like,
>>
>> sdh1: sdh@...80000 {
>>     compatible = "mrvl,pxav3-mmc";
>>     reg-names = "sdhci", "io-pwr", "io-pwr-lock-unlock";
>>     reg = <0xd4280000 0x120>,
>>         <0xd401e81c 4>,
>>         <0xd4015068 8>;
>>     ...
>> };
>>
>> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
>> ---
>>   drivers/mmc/host/sdhci-pxav3.c | 59
>> ++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 59 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-pxav3.c
>> b/drivers/mmc/host/sdhci-pxav3.c
>> index 5d26fe0..cebb2f9 100644
>> --- a/drivers/mmc/host/sdhci-pxav3.c
>> +++ b/drivers/mmc/host/sdhci-pxav3.c
>> @@ -63,11 +63,18 @@
>>   #define IO_PWR_AKEY_ASSAR        0xeb10
>>   #define IO_PWR_MMC1_PAD_1V8        BIT(2)
>>
>> +/* IO Power control */
>> +#define IO_PWR_AKEY_ASFAR        0xbaba
>> +#define IO_PWR_AKEY_ASSAR        0xeb10
>> +#define IO_PWR_MMC1_PAD_1V8        BIT(2)
>> +
>>   struct sdhci_pxa {
>>       struct clk *clk_core;
>>       struct clk *clk_io;
>>       u8    power_mode;
>>       void __iomem *sdio3_conf_reg;
>> +    void __iomem *io_pwr_reg;
>> +    void __iomem *io_pwr_lock_reg;
>>   };
>>
>>   /*
>> @@ -307,6 +314,38 @@ static void pxav3_set_uhs_signaling(struct
>> sdhci_host *host, unsigned int uhs)
>>           __func__, uhs, ctrl_2);
>>   }
>>
>> +static void pxav3_voltage_switch(struct sdhci_host *host,
>> +                        u8 signal_voltage)
>> +{
>> +    struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +    struct sdhci_pxa *pxa = pltfm_host->priv;
>> +    unsigned int val;
>> +
>> +    if (!pxa->io_pwr_reg || !pxa->io_pwr_lock_reg)
>> +        return;
>> +
>> +    /* Lock register is 64 bit: First & Second access register */
>> +    writel(IO_PWR_AKEY_ASFAR, pxa->io_pwr_lock_reg);
>> +    writel(IO_PWR_AKEY_ASSAR, pxa->io_pwr_lock_reg + 4);
>> +    val = readl(pxa->io_pwr_reg);
>> +
>> +    switch (signal_voltage) {
>> +    case MMC_SIGNAL_VOLTAGE_180:
>> +    case MMC_SIGNAL_VOLTAGE_120:
>> +        val |= IO_PWR_MMC1_PAD_1V8;
>> +        break;
>> +    case MMC_SIGNAL_VOLTAGE_330:
>> +    default:
>> +        val &= ~IO_PWR_MMC1_PAD_1V8;
>> +        break;
>> +    }
>> +
>> +    writel(IO_PWR_AKEY_ASFAR, pxa->io_pwr_lock_reg);
>> +    writel(IO_PWR_AKEY_ASSAR, pxa->io_pwr_lock_reg + 4);
>> +
>> +    writel(val, pxa->io_pwr_reg);
>> +}
>> +
>>   static const struct sdhci_ops pxav3_sdhci_ops = {
>>       .set_clock            = sdhci_set_clock,
>>       .platform_send_init_74_clocks    = pxav3_gen_init_74_clocks,
>> @@ -314,6 +353,7 @@ static const struct sdhci_ops pxav3_sdhci_ops = {
>>       .set_bus_width            = sdhci_set_bus_width,
>>       .reset                = pxav3_reset,
>>       .set_uhs_signaling        = pxav3_set_uhs_signaling,
>> +    .voltage_switch            = pxav3_voltage_switch,
>>   };
>>
>>   static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
>> @@ -368,6 +408,7 @@ static int sdhci_pxav3_probe(struct
>> platform_device *pdev)
>>       struct sdhci_host *host = NULL;
>>       struct sdhci_pxa *pxa = NULL;
>>       const struct of_device_id *match;
>> +    struct resource *res;
>>       int ret;
>>
>>       pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa),
>> GFP_KERNEL);
>> @@ -408,6 +449,24 @@ static int sdhci_pxav3_probe(struct
>> platform_device *pdev)
>>               goto err_mbus_win;
>>       }
>>
>> +    res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> "io-pwr-conf");
>> +    if (res) {
>> +        pxa->io_pwr_reg = devm_ioremap_resource(&pdev->dev, res);
>> +        if (IS_ERR(pxa->io_pwr_reg)) {
>> +            ret = PTR_ERR(pxa->io_pwr_reg);
>> +            goto err_mbus_win;
>> +        }
>> +    }
>
> Hi Vaibhav,
>
> Why not get it from syscon and use regmap API to deal with it.
> IMO, that's okay, you can find examples from
> drivers/mmc/host/dw_mmc-k3.c: dw_mci_hi6220_switch_voltage
>
>

Thanks Shawn,
Good to know that, something similar is already in the mainline.

Quickly looked into the driver, and I think it looks ok and doable.
I will for couple of days, to see whether I get further comments and then
spin next version.

Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/