| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Sep 2015 16:29:14 +0800
From: Ley Foon Tan <lftan@...era.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
Russell King <linux@....linux.org.uk>,
Marc Zyngier <Marc.Zyngier@....com>,
Arnd Bergmann <arnd@...db.de>,
Dinh Nguyen <dinguyen@...nsource.altera.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <Pawel.Moll@....com>,
Mark Rutland <Mark.Rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: Re: [PATCH v6 3/6] pci:host: Add Altera PCIe host controller driver
On Wed, Sep 2, 2015 at 12:33 AM, Lorenzo Pieralisi
<lorenzo.pieralisi@....com> wrote:
>
> On Tue, Sep 01, 2015 at 11:30:05AM +0100, Ley Foon Tan wrote:
>
> [...]
>
> > +static void altera_pcie_retrain(struct pci_dev *dev)
> > +{
> > + u16 linkcap, linkstat;
> > +
> > + /*
> > + * Set the retrain bit if the PCIe rootport support > 2.5GB/s, but
> > + * current speed is 2.5 GB/s.
> > + */
> > + pcie_capability_read_word(dev, PCI_EXP_LNKCAP, &linkcap);
> > +
> > + if ((linkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB)
> > + return;
> > +
> > + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &linkstat);
> > + if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB)
> > + pcie_capability_set_word(dev, PCI_EXP_LNKCTL,
> > + PCI_EXP_LNKCTL_RL);
> > +}
> > +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ALTERA, PCI_ANY_ID, altera_pcie_retrain);
>
> This filtering is still arguable, since it unconditionally applies to
> all Altera PCI devices (I guess there are not any apart from this
> host controller).
This fixup is required for all Altera PCIe controller in all device families.
>
> > +
> > +static void altera_pcie_fixup_res(struct pci_dev *dev)
> > +{
> > + /*
> > + * Prevent enumeration of root port.
> > + */
> > + if (!dev->bus->parent && dev->devfn == 0) {
> > + int i;
> > +
> > + for (i = 0; i < PCI_NUM_RESOURCES; i++) {
> > + dev->resource[i].start = 0;
> > + dev->resource[i].end = 0;
> > + dev->resource[i].flags = 0;
> > + }
> > + }
> > +}
> > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ALTERA, PCI_ANY_ID,
> > + altera_pcie_fixup_res);
>
> Ditto, it is a quirk of your host controller, not a quirk for
> all Altera PCI devices.
Same here.
>
> > +static inline void cra_writel(struct altera_pcie *pcie, u32 value, u32 reg)
> > +{
> > + writel_relaxed(value, pcie->cra_base + reg);
> > +}
> > +
> > +static inline u32 cra_readl(struct altera_pcie *pcie, u32 reg)
> > +{
> > + return readl_relaxed(pcie->cra_base + reg);
> > +}
> > +
> > +static void tlp_read_rx(struct altera_pcie *pcie,
> > + struct tlp_rp_regpair_t *tlp_rp_regdata)
> > +{
> > + tlp_rp_regdata->ctrl = cra_readl(pcie, RP_RXCPL_STATUS);
> > + tlp_rp_regdata->reg0 = cra_readl(pcie, RP_RXCPL_REG0);
> > + tlp_rp_regdata->reg1 = cra_readl(pcie, RP_RXCPL_REG1);
> > +}
> > +
> > +static void tlp_write_tx(struct altera_pcie *pcie,
> > + struct tlp_rp_regpair_t *tlp_rp_regdata)
> > +{
> > + cra_writel(pcie, tlp_rp_regdata->reg0, RP_TX_REG0);
> > + cra_writel(pcie, tlp_rp_regdata->reg1, RP_TX_REG1);
> > + cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
> > +}
> > +
> > +static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
> > +{
> > + return !!(cra_readl(pcie, RP_LTSSM) & LTSSM_L0);
> > +}
> > +
> > +static bool altera_pcie_valid_config(struct altera_pcie *pcie,
> > + struct pci_bus *bus, int dev)
> > +{
> > + /* If there is no link, then there is no device */
> > + if (bus->number != pcie->root_bus_nr) {
> > + if (!altera_pcie_link_is_up(pcie))
> > + return false;
> > + }
>
> Can you explain to pls me why you have to check this for every config
> transaction ? Isn't it something that can prevent probing the
> host controller altogether ?
In our PCIe hardware spec, it stated that software should check the
link status before issuing a configuration request to downstream
ports.
BTW, other pci controllers have similar implementation as well, eg: dw
pci, mvebu pci.
>
> > +
> > + /* access only one slot on each root port */
> > + if (bus->number == pcie->root_bus_nr && dev > 0)
> > + return false;
> > +
> > + /*
> > + * Do not read more than one device on the bus directly attached
> > + * to RC.
>
> You should also explain why.
Okay.
>
> > + */
> > + if (bus->primary == pcie->root_bus_nr && dev > 0)
> > + return false;
> > +
> > + return true;
> > +}
> > +
> > +static int tlp_read_packet(struct altera_pcie *pcie, u32 *value)
> > +{
> > + u8 loop;
> > + struct tlp_rp_regpair_t tlp_rp_regdata;
> > +
> > + for (loop = 0; loop < TLP_LOOP; loop++) {
> > + tlp_read_rx(pcie, &tlp_rp_regdata);
> > + if (tlp_rp_regdata.ctrl & RP_RXCPL_EOP) {
> > + if (value)
> > + *value = tlp_rp_regdata.reg0;
> > + return PCIBIOS_SUCCESSFUL;
> > + }
> > + udelay(5);
>
> Could you comment please on the chosen udelay/TLP_LOOP values (ie how
> did you come up with them) ?
For udelay value, we just want to have small delay between each read.
For TLP_LOOP value, minimum 2 loops to read tlp headers and 1 loop to
read data payload. So, we choose to poll 10 loops for maximum.
>
> > + }
> > +
> > + return -ENOENT;
> > +}
> > +
> > +static void tlp_write_packet_unaligned(struct altera_pcie *pcie, u32 *headers,
> > + u32 data)
> > +{
> > + struct tlp_rp_regpair_t tlp_rp_regdata;
> > +
> > + tlp_rp_regdata.reg0 = headers[0];
> > + tlp_rp_regdata.reg1 = headers[1];
> > + tlp_rp_regdata.ctrl = RP_TX_SOP;
> > + tlp_write_tx(pcie, &tlp_rp_regdata);
> > +
> > + tlp_rp_regdata.reg0 = headers[2];
> > + tlp_rp_regdata.reg1 = data;
> > + tlp_rp_regdata.ctrl = RP_TX_EOP;
> > + tlp_write_tx(pcie, &tlp_rp_regdata);
> > +}
> > +
> > +static void tlp_write_packet_aligned(struct altera_pcie *pcie, u32 *headers,
> > + u32 data)
> > +{
> > + struct tlp_rp_regpair_t tlp_rp_regdata;
> > +
> > + tlp_rp_regdata.reg0 = headers[0];
> > + tlp_rp_regdata.reg1 = headers[1];
> > + tlp_rp_regdata.ctrl = RP_TX_SOP;
> > + tlp_write_tx(pcie, &tlp_rp_regdata);
> > +
> > + tlp_rp_regdata.reg0 = headers[2];
> > + tlp_rp_regdata.reg1 = 0;
> > + tlp_rp_regdata.ctrl = 0;
> > + tlp_write_tx(pcie, &tlp_rp_regdata);
> > +
> > + tlp_rp_regdata.reg0 = data;
> > + tlp_rp_regdata.reg1 = 0;
> > + tlp_rp_regdata.ctrl = RP_TX_EOP;
> > + tlp_write_tx(pcie, &tlp_rp_regdata);
> > +}
>
> I do not think you need two functions here, a flag can do.
Okay, will merge these 2 functions.
>
> > +static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn,
> > + int where, u32 *value)
> > +{
> > + int ret;
> > + u32 headers[TLP_HDR_SIZE];
> > +
> > + if (bus == pcie->root_bus_nr)
> > + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD0);
> > + else
> > + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD1);
> > +
> > + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn),
> > + TLP_READ_TAG);
> > + headers[2] = TLP_CFG_DW2(bus, devfn, where);
> > +
> > + tlp_write_packet_unaligned(pcie, headers, 0);
> > +
> > + ret = tlp_read_packet(pcie, value);
> > + if (ret != PCIBIOS_SUCCESSFUL)
> > + *value = ~0UL; /* return 0xFFFFFFFF if error */
> > +
> > + return ret;
> > +}
> > +
> > +static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn,
> > + int where, u32 value)
> > +{
> > + u32 headers[TLP_HDR_SIZE];
> > + int ret;
> > +
> > + if (bus == pcie->root_bus_nr)
> > + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR0);
> > + else
> > + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR1);
> > +
> > + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn),
> > + TLP_WRITE_TAG);
> > + headers[2] = TLP_CFG_DW2(bus, devfn, where);
> > +
> > + /* check alignment to Qword */
> > + if ((where & 0x7) == 0)
> > + tlp_write_packet_aligned(pcie, headers, value);
> > + else
> > + tlp_write_packet_unaligned(pcie, headers, value);
> > +
> > + ret = tlp_read_packet(pcie, NULL);
> > + if (ret != PCIBIOS_SUCCESSFUL)
> > + return ret;
> > +
> > + /* Keep an eye out for changes to the root bus number */
> > + if ((bus == pcie->root_bus_nr) && (where == PCI_PRIMARY_BUS))
> > + pcie->root_bus_nr = (u8)(value);
>
> Essentially you are polling the rootport bridge programming here, correct ?
> I think you should describe this a bit better along with the assumptions
> you are making.
Yes, you are right. Will update description here.
>
[...]
> > +
> > +static void altera_pcie_release_of_pci_ranges(struct altera_pcie *pcie)
> > +{
> > + pci_free_resource_list(&pcie->resources);
> > +}
> > +
> > +static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie)
> > +{
> > + int err, res_valid = 0;
> > + struct device *dev = &pcie->pdev->dev;
> > + struct device_node *np = dev->of_node;
> > + resource_size_t iobase;
> > + struct resource_entry *win;
> > +
> > + err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pcie->resources,
> > + &iobase);
>
> Nit: I do not see the point of passing iobase. You do not support IO space,
> if there is an IO address space in DT you want the function to barf,
> you do not want the function to initialize iobase silently.
>
> So, you should pass iobase as NULL, if there is an IO space in DT:
>
> of_pci_get_host_bridge_resources()
>
> will barf and that's what you want to flag FW misconfigurations up.
Okay, will pass in NULL for iobase.
>
> [...]
>
> > +static int altera_pcie_probe(struct platform_device *pdev)
> > +{
> > + struct altera_pcie *pcie;
> > + struct pci_bus *bus;
> > + int ret;
> > +
> > + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> > + if (!pcie)
> > + return -ENOMEM;
> > +
> > + pcie->pdev = pdev;
> > +
> > + ret = altera_pcie_parse_dt(pcie);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Parsing DT failed\n");
> > + return ret;
> > + }
> > +
> > + INIT_LIST_HEAD(&pcie->resources);
> > +
> > + ret = altera_pcie_parse_request_of_pci_ranges(pcie);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed add resources\n");
> > + return ret;
> > + }
> > +
> > + ret = altera_pcie_init_irq_domain(pcie);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed creating IRQ Domain\n");
> > + return ret;
> > + }
> > +
> > + pcie->root_bus_nr = 0;
>
> Nit: It is already 0.
Okay. Will remove it.
>
> > +
> > + /* clear all interrupts */
> > + cra_writel(pcie, P2A_INT_STS_ALL, P2A_INT_STATUS);
> > + /* enable all interrupts */
> > + cra_writel(pcie, P2A_INT_ENA_ALL, P2A_INT_ENABLE);
> > +
> > + bus = pci_scan_root_bus(&pdev->dev, pcie->root_bus_nr, &altera_pcie_ops,
> > + pcie, &pcie->resources);
> > + if (!bus)
> > + return -ENOMEM;
> > +
> > + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> > + pci_assign_unassigned_bus_resources(bus);
>
> I think you are missing a call to pcie_bus_configure_settings(),
> see drivers/pci/host/pci-host-generic.c
Other pci controller drivers like xgene and iproc don't call to this
function, but it call in
arch/arm/kernel/bios32.c:pci_common_init_dev().
Do we really need this?
Thanks for reviewing.
Regards
Ley Foon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists