[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1441359711-2800-7-git-send-email-kernel@martin.sperl.org>
Date: Fri, 4 Sep 2015 09:41:50 +0000
From: kernel@...tin.sperl.org
To: Stephen Warren <swarren@...dotorg.org>, Lee Jones <lee@...nel.org>,
Russell King <linux@....linux.org.uk>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>, devicetree@...r.kernel.org,
linux-rpi-kernel@...ts.infradead.org, linux-spi@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Martin Sperl <kernel@...tin.sperl.org>
Subject: [PATCH v5 6/6] dt/bindings: bcm2835: Add binding documentation for auxiliar spi devices
From: Martin Sperl <kernel@...tin.sperl.org>
add binding documentation
Signed-off-by: Martin Sperl <kernel@...tin.sperl.org>
---
.../bindings/spi/brcm,bcm2835-aux-spi.txt | 47 ++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
Changelog:
v4->v5: fixed wording for reg
removed reference to syscon
removed documentation on typical GPIO config
diff --git a/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
new file mode 100644
index 0000000..3ade499
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt
@@ -0,0 +1,47 @@
+Broadcom BCM2835 auxiliar SPI1/2 controller
+
+The BCM2835 contains two forms of SPI master controller, one known simply as
+SPI0, and the other known as the "Universal SPI Master"; part of the
+auxiliary block. This binding applies to the SPI1/2 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux-spi".
+- reg: Should contain register location and length for the spi block
+- interrupts: Should contain shared interrupt of the aux block
+- clocks: The clock feeding the SPI controller.
+- cs-gpios: the cs-gpios (native cs is NOT supported)
+ see also spi-bus.txt
+- bcrm,aux-enable: the bcrm,bcm2835-aux-enable config entry to handle
+ enabling/disabling of the spi1/spi2/uart1 HW block
+ second "argument" is the mask to apply to the
+ enable register
+
+Example:
+
+spi1@...15080 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e215080 0x40>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
+ bcrm,aux-enable = <&aux_enable 2>;
+};
+
+spi2@...150c0 {
+ compatible = "brcm,bcm2835-aux-spi";
+ reg = <0x7e2150c0 0x40>;
+ interrupts = <1 29>;
+ clocks = <&clk_spi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
+ bcrm,aux-enable = <&aux_enable 4>;
+};
+
+/* the necessary bcm2835 aux-enable referenced above */
+aux_enable: aux_enable@...e215004 {
+ compatible = "bcrm,bcm2835-aux";
+ reg = <0x7e215004 0x04>;
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists