[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <55EB4EEA.2070409@redhat.com>
Date: Sat, 05 Sep 2015 16:22:02 -0400
From: Jon Masters <jcm@...hat.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>, Duc Dang <dhdang@....com>
CC: Tanmay Inamdar <tinamdar@....com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
linux-arm <linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: X-Gene: Unhandled fault: synchronous external abort in pci_generic_config_read32
On 09/05/2015 04:13 PM, Jon Masters wrote:
> On 08/11/2015 03:28 PM, Bjorn Helgaas wrote:
>> On Mon, Aug 10, 2015 at 2:07 PM, Duc Dang <dhdang@....com> wrote:
>>> On Mon, Aug 10, 2015 at 10:42 AM, Bjorn Helgaas <bhelgaas@...gle.com> wrote:
>>>> On Mon, Aug 10, 2015 at 12:16 PM, Duc Dang <dhdang@....com> wrote:
>>>>> On Monday, August 10, 2015, Bjorn Helgaas <bhelgaas@...gle.com> wrote:
>>>>>>
>>>>>> On Fri, Jul 31, 2015 at 12:00 PM, Duc Dang <dhdang@....com> wrote:
>>>>>>> On Wed, Jul 29, 2015 at 8:55 AM, Bjorn Helgaas <bhelgaas@...gle.com>
>>>>>>> wrote:
>>>>>>>> On Tue, Jul 28, 2015 at 08:22:55PM -0500, Bjorn Helgaas wrote:
>>>>>>>>> On Tue, Jul 28, 2015 at 02:50:39PM -0700, Duc Dang wrote:
>>>>>>>>
>>>>>>>>>> Do you have another PCIe card to try on the same reboot test on this
>>>>>>>>>> board?
>>>>>>>>>
>>>>>>>>> I've seen this on at least two Mellanox cards. I'm running similar
>>>>>>>>> tests
>>>>>>>>> on a different type of card now.
>>>>>>>>
>>>>>>>> FWIW, reboot tests on two machines with Mellanox cards failed, while
>>>>>>>> the
>>>>>>>> same test on a machine with a different proprietary card succeeded.
>>>>>>>
>>>>>>> Thanks, Bjorn.
>>>>>>>
>>>>>>> I don't have the same Mellanox card as yours, but I will also run
>>>>>>> similar reboot test to see if I hit the same issue with my card.
>>>>>>
>>>>>> Any more hints on this? Nothing has changed on my end, so of course
>>>>>> I'm still seeing this, always on machines with Mellanox, and never on
>>>>>> other machines. Could this be a hardware issue like a signal
>>>>>> integrity or margin issue? I don't know where to go from here because
>>>>>> I'm not a hardware person, and I don't know anything to do in
>>>>>> software.
>>>>>
>>>>>
>>>>> Hi Bjorn,
>>>>>
>>>>> I tried to run similar reboot tests on 2 different Mellanox cards (Connect-X
>>>>> family, one card has 2 10G interfaces, the other one has 1 port that
>>>>> supports InfiniBand) with U-Boot 1.15.12 and linux 4.2-rc5 and I did not see
>>>>> the crash that you encounterred.
>>>>>
>>>>> Did you check if your Mellanox cards have latest firmware? I did see some
>>>>> link issues on my Mellanox cards with its old firmware before.
>>>>
>>>> Good idea; I'll check that, too. Also, I just learned that these
>>>> cards on installed with an extender card because of some space issues,
>>>> so we're going to test again without the extender.
>>>
>>> Hi Bjorn,
>>>
>>> Are other cards that passed your test installed directly to the
>>> on-board PCIe slot?
>>> If yes, then this is a good data point and it will be useful to test
>>> the case where
>>> your Mellanox cards are directly installed into the on-board PCIe slot.
>>
>> The cards that passed the test were installed directly, with no
>> extender. We removed the extender from one of the machines with the
>> Mellanox card and have not seen this issue since then. I think it's
>> very likely that the problem is related to using the extender.
>
> If you're trying to use Mellanox cards in (for example) an APM Mustang
> like system with a PCIe extender card (for example a 90 degree angle
> adjustment for a low profile server case), you might want to ping me
> offline. I have procured a number of these over the past couple of years
> for my home lab and have found one that works (almost) reliably on that
> particular hardware platform and does 10G in my home lab.
Traveling for the holiday, but I guess it doesn't need to be a secret. I
think I have found some success with this one (but I have ordered many
different ones over the past year so will confirm next week):
http://www.amazon.com/gp/product/B00H8VVD00?psc=1&redirect=true&ref_=oh_aui_search_detailpage
Specifically, the fixed angle adapter brackets generally DO NOT work.
Jon.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists