| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1441523623-152703-21-git-send-email-wangnan0@huawei.com>
Date: Sun, 6 Sep 2015 07:13:36 +0000
From: Wang Nan <wangnan0@...wei.com>
To: <acme@...hat.com>, <ast@...mgrid.com>,
<masami.hiramatsu.pt@...achi.com>, <namhyung@...nel.org>
CC: <a.p.zijlstra@...llo.nl>, <brendan.d.gregg@...il.com>,
<daniel@...earbox.net>, <dsahern@...il.com>, <hekuang@...wei.com>,
<jolsa@...nel.org>, <lizefan@...wei.com>, <paulus@...ba.org>,
<wangnan0@...wei.com>, <xiakaixu@...wei.com>, <pi3orama@....com>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 20/27] perf tools: Add prologue for BPF programs for fetching arguments
From: He Kuang <hekuang@...wei.com>
This patch generates prologue for a BPF program which fetch arguments
for it. With this patch, the program can have arguments as follow:
SEC("lock_page=__lock_page page->flags")
int lock_page(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
This patch passes at most 3 arguments from r3, r4 and r5. r1 is still
the ctx pointer. r2 is used to indicate the successfulness of
dereferencing.
This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack
pointer for result. Result of each arguments first store on stack:
low address
BPF_REG_FP - 24 ARG3
BPF_REG_FP - 16 ARG2
BPF_REG_FP - 8 ARG1
BPF_REG_FP
high address
Then loaded into r3, r4 and r5.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Signed-off-by: He Kuang <hekuang@...wei.com>
Signed-off-by: Wang Nan <wangnan0@...wei.com>
Cc: Alexei Starovoitov <ast@...mgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@...il.com>
Cc: Daniel Borkmann <daniel@...earbox.net>
Cc: David Ahern <dsahern@...il.com>
Cc: He Kuang <hekuang@...wei.com>
Cc: Jiri Olsa <jolsa@...nel.org>
Cc: Kaixu Xia <xiakaixu@...wei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
Cc: Namhyung Kim <namhyung@...nel.org>
Cc: Paul Mackerras <paulus@...ba.org>
Cc: Peter Zijlstra <a.p.zijlstra@...llo.nl>
Cc: Zefan Li <lizefan@...wei.com>
Cc: pi3orama@....com
Cc: Arnaldo Carvalho de Melo <acme@...hat.com>
Link: http://lkml.kernel.org/n/1436445342-1402-35-git-send-email-wangnan0@huawei.com
---
tools/perf/util/Build | 1 +
tools/perf/util/bpf-prologue.c | 443 +++++++++++++++++++++++++++++++++++++++++
tools/perf/util/bpf-prologue.h | 34 ++++
3 files changed, 478 insertions(+)
create mode 100644 tools/perf/util/bpf-prologue.c
create mode 100644 tools/perf/util/bpf-prologue.h
diff --git a/tools/perf/util/Build b/tools/perf/util/Build
index f5e9569..edc16e4 100644
--- a/tools/perf/util/Build
+++ b/tools/perf/util/Build
@@ -86,6 +86,7 @@ libperf-y += parse-branch-options.o
libperf-y += parse-regs-options.o
libperf-$(CONFIG_LIBBPF) += bpf-loader.o
+libperf-$(CONFIG_BPF_PROLOGUE) += bpf-prologue.o
libperf-$(CONFIG_LIBELF) += symbol-elf.o
libperf-$(CONFIG_LIBELF) += probe-file.o
libperf-$(CONFIG_LIBELF) += probe-event.o
diff --git a/tools/perf/util/bpf-prologue.c b/tools/perf/util/bpf-prologue.c
new file mode 100644
index 0000000..e4adb18
--- /dev/null
+++ b/tools/perf/util/bpf-prologue.c
@@ -0,0 +1,443 @@
+/*
+ * bpf-prologue.c
+ *
+ * Copyright (C) 2015 He Kuang <hekuang@...wei.com>
+ * Copyright (C) 2015 Wang Nan <wangnan0@...wei.com>
+ * Copyright (C) 2015 Huawei Inc.
+ */
+
+#include <bpf/libbpf.h>
+#include "perf.h"
+#include "debug.h"
+#include "bpf-prologue.h"
+#include "probe-finder.h"
+#include <dwarf-regs.h>
+#include <linux/filter.h>
+
+#define BPF_REG_SIZE 8
+
+#define JMP_TO_ERROR_CODE -1
+#define JMP_TO_SUCCESS_CODE -2
+#define JMP_TO_USER_CODE -3
+
+struct bpf_insn_pos {
+ struct bpf_insn *begin;
+ struct bpf_insn *end;
+ struct bpf_insn *pos;
+};
+
+static inline int
+pos_get_cnt(struct bpf_insn_pos *pos)
+{
+ return pos->pos - pos->begin;
+}
+
+static int
+append_insn(struct bpf_insn new_insn, struct bpf_insn_pos *pos)
+{
+ if (!pos->pos)
+ return -ERANGE;
+
+ if (pos->pos + 1 >= pos->end) {
+ pr_err("bpf prologue: prologue too long\n");
+ pos->pos = NULL;
+ return -ERANGE;
+ }
+
+ *(pos->pos)++ = new_insn;
+ return 0;
+}
+
+static int
+check_pos(struct bpf_insn_pos *pos)
+{
+ if (!pos->pos || pos->pos >= pos->end)
+ return -ERANGE;
+ return 0;
+}
+
+/* Give it a shorter name */
+#define ins(i, p) append_insn((i), (p))
+
+/*
+ * Give a register name (in 'reg'), generate instruction to
+ * load register into an eBPF register rd:
+ * 'ldd target_reg, offset(ctx_reg)', where:
+ * ctx_reg is pre initialized to pointer of 'struct pt_regs'.
+ */
+static int
+gen_ldx_reg_from_ctx(struct bpf_insn_pos *pos, int ctx_reg,
+ const char *reg, int target_reg)
+{
+ int offset = regs_query_register_offset(reg);
+
+ if (offset < 0) {
+ pr_err("bpf: prologue: failed to get register %s\n",
+ reg);
+ return -1;
+ }
+ ins(BPF_LDX_MEM(BPF_DW, target_reg, ctx_reg, offset), pos);
+
+ if (check_pos(pos))
+ return -ERANGE;
+ return 0;
+}
+
+/*
+ * Generate a BPF_FUNC_probe_read function call.
+ *
+ * src_base_addr_reg is a register holding base address,
+ * dst_addr_reg is a register holding dest address (on stack),
+ * result is:
+ *
+ * *[dst_addr_reg] = *([src_base_addr_reg] + offset)
+ *
+ * Arguments of BPF_FUNC_probe_read:
+ * ARG1: ptr to stack (dest)
+ * ARG2: size (8)
+ * ARG3: unsafe ptr (src)
+ */
+static int
+gen_read_mem(struct bpf_insn_pos *pos,
+ int src_base_addr_reg,
+ int dst_addr_reg,
+ long offset)
+{
+ /* mov arg3, src_base_addr_reg */
+ if (src_base_addr_reg != BPF_REG_ARG3)
+ ins(BPF_MOV64_REG(BPF_REG_ARG3, src_base_addr_reg), pos);
+ /* add arg3, #offset */
+ if (offset)
+ ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG3, offset), pos);
+
+ /* mov arg2, #reg_size */
+ ins(BPF_ALU64_IMM(BPF_MOV, BPF_REG_ARG2, BPF_REG_SIZE), pos);
+
+ /* mov arg1, dst_addr_reg */
+ if (dst_addr_reg != BPF_REG_ARG1)
+ ins(BPF_MOV64_REG(BPF_REG_ARG1, dst_addr_reg), pos);
+
+ /* Call probe_read */
+ ins(BPF_EMIT_CALL(BPF_FUNC_probe_read), pos);
+ /*
+ * Error processing: if read fail, goto error code,
+ * will be relocated. Target should be the start of
+ * error processing code.
+ */
+ ins(BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, JMP_TO_ERROR_CODE),
+ pos);
+
+ if (check_pos(pos))
+ return -ERANGE;
+ return 0;
+}
+
+/*
+ * Each arg should be bare register. Fetch and save them into argument
+ * registers (r3 - r5).
+ *
+ * BPF_REG_1 should have been initialized with pointer to
+ * 'struct pt_regs'.
+ */
+static int
+gen_prologue_fastpath(struct bpf_insn_pos *pos,
+ struct probe_trace_arg *args, int nargs)
+{
+ int i;
+
+ for (i = 0; i < nargs; i++)
+ if (gen_ldx_reg_from_ctx(pos, BPF_REG_1, args[i].value,
+ BPF_PROLOGUE_START_ARG_REG + i))
+ goto errout;
+
+ if (check_pos(pos))
+ goto errout;
+ return 0;
+errout:
+ return -1;
+}
+
+/*
+ * Slow path:
+ * At least one argument has the form of 'offset($rx)'.
+ *
+ * Following code first stores them into stack, then loads all of then
+ * to r2 - r5.
+ * Before final loading, the final result should be:
+ *
+ * low address
+ * BPF_REG_FP - 24 ARG3
+ * BPF_REG_FP - 16 ARG2
+ * BPF_REG_FP - 8 ARG1
+ * BPF_REG_FP
+ * high address
+ *
+ * For each argument (described as: offn(...off2(off1(reg)))),
+ * generates following code:
+ *
+ * r7 <- fp
+ * r7 <- r7 - stack_offset // Ideal code should initialize r7 using
+ * // fp before generating args. However,
+ * // eBPF won't regard r7 as stack pointer
+ * // if it is generated by minus 8 from
+ * // another stack pointer except fp.
+ * // This is why we have to set r7
+ * // to fp for each variable.
+ * r3 <- value of 'reg'-> generated using gen_ldx_reg_from_ctx()
+ * (r7) <- r3 // skip following instructions for bare reg
+ * r3 <- r3 + off1 . // skip if off1 == 0
+ * r2 <- 8 \
+ * r1 <- r7 |-> generated by gen_read_mem()
+ * call probe_read /
+ * jnei r0, 0, err ./
+ * r3 <- (r7)
+ * r3 <- r3 + off2 . // skip if off2 == 0
+ * r2 <- 8 \ // r2 may be broken by probe_read, so set again
+ * r1 <- r7 |-> generated by gen_read_mem()
+ * call probe_read /
+ * jnei r0, 0, err ./
+ * ...
+ */
+static int
+gen_prologue_slowpath(struct bpf_insn_pos *pos,
+ struct probe_trace_arg *args, int nargs)
+{
+ int i;
+
+ for (i = 0; i < nargs; i++) {
+ struct probe_trace_arg *arg = &args[i];
+ const char *reg = arg->value;
+ struct probe_trace_arg_ref *ref = NULL;
+ int stack_offset = (i + 1) * -8;
+
+ pr_debug("prologue: fetch arg %d, base reg is %s\n",
+ i, reg);
+
+ /* value of base register is stored into ARG3 */
+ if (gen_ldx_reg_from_ctx(pos, BPF_REG_CTX, reg,
+ BPF_REG_ARG3)) {
+ pr_err("prologue: failed to get offset of register %s\n",
+ reg);
+ goto errout;
+ }
+
+ /* Make r7 the stack pointer. */
+ ins(BPF_MOV64_REG(BPF_REG_7, BPF_REG_FP), pos);
+ /* r7 += -8 */
+ ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, stack_offset), pos);
+ /*
+ * Store r3 (base register) onto stack
+ * Ensure fp[offset] is set.
+ * fp is the only valid base register when storing
+ * into stack. We are not allowed to use r7 as base
+ * register here.
+ */
+ ins(BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_ARG3,
+ stack_offset), pos);
+
+ ref = arg->ref;
+ while (ref) {
+ pr_debug("prologue: arg %d: offset %ld\n",
+ i, ref->offset);
+ if (gen_read_mem(pos, BPF_REG_3, BPF_REG_7,
+ ref->offset)) {
+ pr_err("prologue: failed to generate probe_read function call\n");
+ goto errout;
+ }
+
+ ref = ref->next;
+ /*
+ * Load previous result into ARG3. Use
+ * BPF_REG_FP instead of r7 because verifier
+ * allows FP based addressing only.
+ */
+ if (ref)
+ ins(BPF_LDX_MEM(BPF_DW, BPF_REG_ARG3,
+ BPF_REG_FP, stack_offset), pos);
+ }
+ }
+
+ /* Final pass: read to registers */
+ for (i = 0; i < nargs; i++)
+ ins(BPF_LDX_MEM(BPF_DW, BPF_PROLOGUE_START_ARG_REG + i,
+ BPF_REG_FP, -BPF_REG_SIZE * (i + 1)), pos);
+
+ ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_SUCCESS_CODE), pos);
+
+ if (check_pos(pos))
+ goto errout;
+ return 0;
+errout:
+ return -1;
+}
+
+static int
+prologue_relocate(struct bpf_insn_pos *pos, struct bpf_insn *error_code,
+ struct bpf_insn *success_code, struct bpf_insn *user_code)
+{
+ struct bpf_insn *insn;
+
+ if (check_pos(pos))
+ return -ERANGE;
+
+ for (insn = pos->begin; insn < pos->pos; insn++) {
+ u8 class = BPF_CLASS(insn->code);
+ u8 opcode;
+
+ if (class != BPF_JMP)
+ continue;
+ opcode = BPF_OP(insn->code);
+ if (opcode == BPF_CALL)
+ continue;
+
+ switch (insn->off) {
+ case JMP_TO_ERROR_CODE:
+ insn->off = error_code - (insn + 1);
+ break;
+ case JMP_TO_SUCCESS_CODE:
+ insn->off = success_code - (insn + 1);
+ break;
+ case JMP_TO_USER_CODE:
+ insn->off = user_code - (insn + 1);
+ break;
+ default:
+ pr_err("bpf prologue: internal error: relocation failed\n");
+ return -1;
+ }
+ }
+ return 0;
+}
+
+int bpf__gen_prologue(struct probe_trace_arg *args, int nargs,
+ struct bpf_insn *new_prog, size_t *new_cnt,
+ size_t cnt_space)
+{
+ struct bpf_insn *success_code = NULL;
+ struct bpf_insn *error_code = NULL;
+ struct bpf_insn *user_code = NULL;
+ struct bpf_insn_pos pos;
+ bool fastpath = true;
+ int i;
+
+ if (!new_prog || !new_cnt)
+ return -EINVAL;
+
+ pos.begin = new_prog;
+ pos.end = new_prog + cnt_space;
+ pos.pos = new_prog;
+
+ if (!nargs) {
+ ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0),
+ &pos);
+
+ if (check_pos(&pos))
+ goto errout;
+
+ *new_cnt = pos_get_cnt(&pos);
+ return 0;
+ }
+
+ if (nargs > BPF_PROLOGUE_MAX_ARGS)
+ nargs = BPF_PROLOGUE_MAX_ARGS;
+ if (cnt_space > BPF_MAXINSNS)
+ cnt_space = BPF_MAXINSNS;
+
+ /* First pass: validation */
+ for (i = 0; i < nargs; i++) {
+ struct probe_trace_arg_ref *ref = args[i].ref;
+
+ if (args[i].value[0] == '@') {
+ /* TODO: fetch global variable */
+ pr_err("bpf: prologue: global %s%+ld not support\n",
+ args[i].value, ref ? ref->offset : 0);
+ return -ENOTSUP;
+ }
+
+ while (ref) {
+ /* fastpath is true if all args has ref == NULL */
+ fastpath = false;
+
+ /*
+ * Instruction encodes immediate value using
+ * s32, ref->offset is long. On systems which
+ * can't fill long in s32, refuse to process if
+ * ref->offset too large (or small).
+ */
+#ifdef __LP64__
+#define OFFSET_MAX ((1LL << 31) - 1)
+#define OFFSET_MIN ((1LL << 31) * -1)
+ if (ref->offset > OFFSET_MAX ||
+ ref->offset < OFFSET_MIN) {
+ pr_err("bpf: prologue: offset out of bound: %ld\n",
+ ref->offset);
+ return -E2BIG;
+ }
+#endif
+ ref = ref->next;
+ }
+ }
+ pr_debug("prologue: pass validation\n");
+
+ if (fastpath) {
+ /* If all variables are registers... */
+ pr_debug("prologue: fast path\n");
+ if (gen_prologue_fastpath(&pos, args, nargs))
+ goto errout;
+ } else {
+ pr_debug("prologue: slow path\n");
+
+ /* Initialization: move ctx to a callee saved register. */
+ ins(BPF_MOV64_REG(BPF_REG_CTX, BPF_REG_ARG1), &pos);
+
+ if (gen_prologue_slowpath(&pos, args, nargs))
+ goto errout;
+ /*
+ * start of ERROR_CODE (only slow pass needs error code)
+ * mov r2 <- 1
+ * goto usercode
+ */
+ error_code = pos.pos;
+ ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 1),
+ &pos);
+
+ for (i = 0; i < nargs; i++)
+ ins(BPF_ALU64_IMM(BPF_MOV,
+ BPF_PROLOGUE_START_ARG_REG + i,
+ 0),
+ &pos);
+ ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_USER_CODE),
+ &pos);
+ }
+
+ /*
+ * start of SUCCESS_CODE:
+ * mov r2 <- 0
+ * goto usercode // skip
+ */
+ success_code = pos.pos;
+ ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0), &pos);
+
+ /*
+ * start of USER_CODE:
+ * Restore ctx to r1
+ */
+ user_code = pos.pos;
+ if (!fastpath) {
+ /*
+ * Only slow path needs restoring of ctx. In fast path,
+ * register are loaded directly from r1.
+ */
+ ins(BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_CTX), &pos);
+ if (prologue_relocate(&pos, error_code, success_code,
+ user_code))
+ goto errout;
+ }
+
+ if (check_pos(&pos))
+ goto errout;
+
+ *new_cnt = pos_get_cnt(&pos);
+ return 0;
+errout:
+ return -ERANGE;
+}
diff --git a/tools/perf/util/bpf-prologue.h b/tools/perf/util/bpf-prologue.h
new file mode 100644
index 0000000..f1e4c5d
--- /dev/null
+++ b/tools/perf/util/bpf-prologue.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015, He Kuang <hekuang@...wei.com>
+ * Copyright (C) 2015, Huawei Inc.
+ */
+#ifndef __BPF_PROLOGUE_H
+#define __BPF_PROLOGUE_H
+
+#include <linux/compiler.h>
+#include <linux/filter.h>
+#include "probe-event.h"
+
+#define BPF_PROLOGUE_MAX_ARGS 3
+#define BPF_PROLOGUE_START_ARG_REG BPF_REG_3
+#define BPF_PROLOGUE_FETCH_RESULT_REG BPF_REG_2
+
+#ifdef HAVE_BPF_PROLOGUE
+int bpf__gen_prologue(struct probe_trace_arg *args, int nargs,
+ struct bpf_insn *new_prog, size_t *new_cnt,
+ size_t cnt_space);
+#else
+static inline int
+bpf__gen_prologue(struct probe_trace_arg *args __maybe_unused,
+ int nargs __maybe_unused,
+ struct bpf_insn *new_prog __maybe_unused,
+ size_t *new_cnt,
+ size_t cnt_space __maybe_unused)
+{
+ if (!new_cnt)
+ return -EINVAL;
+ *new_cnt = 0;
+ return 0;
+}
+#endif
+#endif /* __BPF_PROLOGUE_H */
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists