[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFqH_50Hbzu1WDV7O3_jnUKVZ2Hhg_0PvV9jR_R1PkhfJ1MAxQ@mail.gmail.com>
Date: Mon, 7 Sep 2015 21:39:38 +0200
From: Enric Balletbo Serra <eballetbo@...il.com>
To: Javier Martinez Canillas <javier@....samsung.com>
Cc: linux-kernel@...r.kernel.org,
Ladislav Michl <ladis@...ux-mips.org>,
BenoƮt Cousson <bcousson@...libre.com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
Javier Martinez Canillas <javier@...hile0.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Rob Herring <robh+dt@...nel.org>,
Tony Lindgren <tony@...mide.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@....linux.org.uk>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2
common dtsi
2015-09-07 18:24 GMT+02:00 Javier Martinez Canillas <javier@....samsung.com>:
> Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC
> so the pinmux configuration for the GPIO connected to the IRQ line
> of the LAN chip should not be defined in the IGEP common dtsi but
> in the one common to the IGEPv2 boards.
>
> While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg.
>
> Suggested-by: Ladislav Michl <ladis@...ux-mips.org>
> Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
>
> ---
>
> arch/arm/boot/dts/omap3-igep.dtsi | 6 ------
> arch/arm/boot/dts/omap3-igep0020-common.dtsi | 6 ++++++
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
> index d5e5cd449b16..2230e1c03320 100644
> --- a/arch/arm/boot/dts/omap3-igep.dtsi
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -78,12 +78,6 @@
> >;
> };
>
> - smsc9221_pins: pinmux_smsc9221_pins {
> - pinctrl-single,pins = <
> - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
> - >;
> - };
> -
> i2c1_pins: pinmux_i2c1_pins {
> pinctrl-single,pins = <
> 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
> diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
> index e458c2185e3c..5ad688c57a00 100644
> --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
> +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
> @@ -156,6 +156,12 @@
> OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
> >;
> };
> +
> + smsc9221_pins: pinmux_smsc9221_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
> + >;
> + };
> };
>
> &omap3_pmx_core2 {
> --
> 2.4.3
>
Looks good to me.
Acked-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists