| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 08 Sep 2015 11:38:47 +0200
From: Robert Baldyga <r.baldyga@...sung.com>
To: gregkh@...uxfoundation.org
Cc: jslaby@...e.com, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org, m.szyprowski@...sung.com,
k.kozlowski@...sung.com, Robert Baldyga <r.baldyga@...sung.com>
Subject: [PATCH 3/3] serial: samsung: Fix UART status handling in DMA mode
This patch fixes UART status handling in DMA mode. For this purpose we
introduce s3c24xx_serial_rx_drain_fifo() function, which contains common
RX handling code for both PIO mode and DMA mode (in case of interrupt).
Thanks to this we have, among others, 'break' condition handling needed
for Magic SysRq, which was missing in DMA mode so far. Since we can use
UART in DMA mode as serial console, it's quite important improvement.
This change additionally simplifies RX handling code, as we no longer
need uart_rx_drain_fifo() function, so we can remove it.
Reported-by: Marek Szyprowski <m.szyprowski@...sung.com>
Signed-off-by: Robert Baldyga <r.baldyga@...sung.com>
---
drivers/tty/serial/samsung.c | 142 +++++++++++++++++++------------------------
1 file changed, 61 insertions(+), 81 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2b05194..007bc5f 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -388,29 +388,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
unsigned long ufstat);
-static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
-{
- struct uart_port *port = &ourport->port;
- struct tty_port *tty = &port->state->port;
- unsigned int ch, ufstat;
- unsigned int count;
-
- ufstat = rd_regl(port, S3C2410_UFSTAT);
- count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
-
- if (!count)
- return;
-
- while (count-- > 0) {
- ch = rd_regb(port, S3C2410_URXH);
-
- ourport->port.icount.rx++;
- tty_insert_flip_char(tty, ch, TTY_NORMAL);
- }
-
- tty_flip_buffer_push(tty);
-}
-
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -573,64 +550,12 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
ourport->rx_mode = S3C24XX_RX_PIO;
}
-static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
{
- unsigned int utrstat, ufstat, received;
- struct s3c24xx_uart_port *ourport = dev_id;
- struct uart_port *port = &ourport->port;
- struct s3c24xx_uart_dma *dma = ourport->dma;
- struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
- struct tty_port *t = &port->state->port;
- unsigned long flags;
- struct dma_tx_state state;
-
- utrstat = rd_regl(port, S3C2410_UTRSTAT);
- ufstat = rd_regl(port, S3C2410_UFSTAT);
-
- spin_lock_irqsave(&port->lock, flags);
-
- if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
- s3c64xx_start_rx_dma(ourport);
- if (ourport->rx_mode == S3C24XX_RX_PIO)
- enable_rx_dma(ourport);
- goto finish;
- }
-
- if (ourport->rx_mode == S3C24XX_RX_DMA) {
- dmaengine_pause(dma->rx_chan);
- dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
- dmaengine_terminate_all(dma->rx_chan);
- received = dma->rx_bytes_requested - state.residue;
- s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
-
- enable_rx_pio(ourport);
- }
-
- uart_rx_drain_fifo(ourport);
-
- if (tty) {
- tty_flip_buffer_push(t);
- tty_kref_put(tty);
- }
-
- wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
-
-finish:
- spin_unlock_irqrestore(&port->lock, flags);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
-{
- struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
unsigned int ufcon, ch, flag, ufstat, uerstat;
- unsigned long flags;
int max_count = port->fifosize;
- spin_lock_irqsave(&port->lock, flags);
-
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -654,9 +579,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
ufcon |= S3C2410_UFCON_RESETRX;
wr_regl(port, S3C2410_UFCON, ufcon);
rx_enabled(port) = 1;
- spin_unlock_irqrestore(&port->lock,
- flags);
- goto out;
+ return;
}
continue;
}
@@ -702,10 +625,67 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
ch, flag);
}
- spin_unlock_irqrestore(&port->lock, flags);
tty_flip_buffer_push(&port->state->port);
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
+{
+ unsigned int utrstat, ufstat, received;
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ struct s3c24xx_uart_dma *dma = ourport->dma;
+ struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
+ struct tty_port *t = &port->state->port;
+ unsigned long flags;
+ struct dma_tx_state state;
+
+ utrstat = rd_regl(port, S3C2410_UTRSTAT);
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
+ s3c64xx_start_rx_dma(ourport);
+ if (ourport->rx_mode == S3C24XX_RX_PIO)
+ enable_rx_dma(ourport);
+ goto finish;
+ }
+
+ if (ourport->rx_mode == S3C24XX_RX_DMA) {
+ dmaengine_pause(dma->rx_chan);
+ dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
+ dmaengine_terminate_all(dma->rx_chan);
+ received = dma->rx_bytes_requested - state.residue;
+ s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+
+ enable_rx_pio(ourport);
+ }
+
+ s3c24xx_serial_rx_drain_fifo(ourport);
+
+ if (tty) {
+ tty_flip_buffer_push(t);
+ tty_kref_put(tty);
+ }
+
+ wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
+
+finish:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s3c24xx_serial_rx_drain_fifo(ourport);
+ spin_unlock_irqrestore(&port->lock, flags);
-out:
return IRQ_HANDLED;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists