| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1441716217-23786-5-git-send-email-leif.lindholm@linaro.org>
Date: Tue, 8 Sep 2015 13:43:36 +0100
From: Leif Lindholm <leif.lindholm@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-serial@...r.kernel.org, linux-acpi@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: mark.rutland@....com, al.stone@...aro.org, torez@...hat.com,
jcm@...hat.com, graeme.gregory@...aro.org,
linaro-acpi@...ts.linaro.org, lv.zheng@...el.com
Subject: [RFC 4/5] tty/console: use SPCR table to define console
From: Torez Smith <torez@...hat.com>
If console= is not added to the kernel command line, the console
is not registered until much further into the booting process. This patch
adds support to parse the SPCR ACPI table to pull console support out,
then use the appropriate drivers to set up console support earlier in the
boot process.
Signed-off-by: Jon Masters <jcm@...hat.com>
[rebased and cleaned up]
Signed-off-by: Torez Smith <torez@...hat.com>
[reworked to use _CRS, moved to drivers/acpi]
Signed-off-by: Leif Lindholm <leif.lindholm@...aro.org>
---
drivers/acpi/console.c | 157 +++++++++++++++++++++++++++++++++++++++
drivers/tty/serial/serial_core.c | 14 +++-
include/linux/acpi.h | 11 ++-
3 files changed, 179 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/console.c b/drivers/acpi/console.c
index a985890..02883a1 100644
--- a/drivers/acpi/console.c
+++ b/drivers/acpi/console.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2012, Intel Corporation
+ * Copyright (c) 2015, Red Hat, Inc.
* Copyright (c) 2015, Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -12,11 +13,17 @@
#define pr_fmt(fmt) "ACPI: " KBUILD_MODNAME ": " fmt
#include <linux/acpi.h>
+#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/serial_core.h>
+#include <linux/tty.h>
#define NUM_ELEMS(x) (sizeof(x) / sizeof(*x))
+static u64 acpi_serial_addr;
+static struct acpi_device *acpi_serial_device;
+static char *acpi_serial_options;
+
#ifdef CONFIG_SERIAL_EARLYCON
static int use_earlycon __initdata;
static int __init setup_acpi_earlycon(char *buf)
@@ -101,3 +108,153 @@ int __init acpi_early_console_probe(void)
return 0;
}
#endif /* CONFIG_SERIAL_EARLYCON */
+
+/*
+ * Parse the SPCR table. If we are not working with version 2 or
+ * higher, bail.
+ * Otherwise, pull out the baud rate and address to the console device.
+ */
+static int __init acpi_parse_spcr(struct acpi_table_header *table)
+{
+ struct acpi_table_spcr *spcr = (struct acpi_table_spcr *)table;
+
+ if (table->revision < 2)
+ return -EOPNOTSUPP;
+
+ /* Handle possible alignment issues */
+ memcpy(&acpi_serial_addr,
+ &spcr->serial_port.address, sizeof(acpi_serial_addr));
+
+ /*
+ * The baud rate the BIOS used for redirection. Valid values are....
+ * 3 = 9600
+ * 4 = 19200
+ * 6 = 57600
+ * 7 = 115200
+ * 0-2, 5, 8 - 255 = reserved
+ */
+ switch (spcr->baud_rate) {
+ case 3:
+ acpi_serial_options = "9600";
+ break;
+ case 4:
+ acpi_serial_options = "19200";
+ break;
+ case 6:
+ acpi_serial_options = "57600";
+ break;
+ case 7:
+ acpi_serial_options = "115200";
+ break;
+ default:
+ acpi_serial_options = "";
+ break;
+ }
+
+ pr_info("SPCR serial device: 0x%llx (options: %s)\n",
+ acpi_serial_addr, acpi_serial_options);
+
+ return 0;
+}
+
+/*
+ * Parse an ACPI "Device" to determine if it represents the
+ * data found in the SPCR table. If the associated Device has
+ * and Address entry, and, that Address matches the one found
+ * in our SPCR table, it's the entry we are interested in.
+ *
+ */
+static acpi_status acpi_spcr_device_scan(acpi_handle handle,
+ u32 level, void *context, void **retv)
+{
+ unsigned long long addr = 0;
+ struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status = AE_OK;
+ struct acpi_device *adev;
+ struct list_head resource_list;
+ struct resource_entry *rentry;
+
+ status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ adev = acpi_bus_get_acpi_device(handle);
+ if (!adev) {
+ pr_err("Err locating SPCR device from ACPI handle\n");
+ return AE_OK; /* skip this one */
+ }
+
+ /*
+ * Read device address from _CRS.
+ */
+ INIT_LIST_HEAD(&resource_list);
+ if (acpi_dev_get_resources(adev, &resource_list, NULL, NULL) <= 0)
+ return AE_OK;
+
+ list_for_each_entry(rentry, &resource_list, node) {
+ if (resource_type(rentry->res) == IORESOURCE_MEM)
+ addr = rentry->res->start;
+ }
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (addr == acpi_serial_addr) {
+ acpi_serial_device = adev;
+
+ pr_info("SPCR serial console: %s (0x%llx)\n",
+ (char *)(name_buffer.pointer), addr);
+
+ return AE_OK; /* harmless to continue */
+ }
+
+ /* continue */
+ return AE_OK; /* continue */
+}
+
+static int __init acpi_setup_spcr(void)
+{
+ if (0 != acpi_table_parse(ACPI_SIG_SPCR, acpi_parse_spcr)) {
+ pr_warn("SPCR table not found - auto console disabled\n");
+ return -ENODEV;
+ }
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, acpi_spcr_device_scan,
+ NULL, NULL, NULL);
+
+ return 0;
+}
+
+static int __init acpi_spcr_setup(void)
+{
+ /*
+ * If ACPI is enabled, scan the tables for
+ * automatic console configuration
+ */
+ if (!acpi_disabled)
+ acpi_setup_spcr();
+
+ return 0;
+}
+subsys_initcall_sync(acpi_spcr_setup);
+
+/**
+ * acpi_console_check() - Check for and configure console from ACPI information
+ * @adev - Pointer to device
+ * @name - Name to use for preferred console without index. ex. "ttyS"
+ * @index - Index to use for preferred console.
+ *
+ * Check if the given device matches the information provided in the SPCR table
+ * If it does then register it as the preferred console and return TRUE.
+ * Otherwise return FALSE.
+ */
+bool acpi_console_check(struct acpi_device *adev, char *name, int index)
+{
+ if (acpi_disabled || !adev || adev != acpi_serial_device
+ || console_set_on_cmdline)
+ return false;
+
+ pr_info("adding preferred console [%s]\n", name);
+
+ return !add_preferred_console(name, index,
+ kstrdup(acpi_serial_options, GFP_KERNEL));
+}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 603d2cc..4b20bc6 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -34,6 +34,7 @@
#include <linux/serial_core.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/acpi.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
@@ -2696,9 +2697,18 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
spin_lock_init(&uport->lock);
lockdep_set_class(&uport->lock, &port_lock_key);
}
- if (uport->cons && uport->dev)
- of_console_check(uport->dev->of_node, uport->cons->name, uport->line);
+ /*
+ * Support both open FW and ACPI access to console definitions.
+ * Both of_console_check() and acpi_console_check() will call
+ * add_preferred_console() if a console definition is found.
+ */
+ if (uport->cons && uport->dev) {
+ if (!acpi_console_check(ACPI_COMPANION(uport->dev),
+ uport->cons->name, uport->line))
+ of_console_check(uport->dev->of_node,
+ uport->cons->name, uport->line);
+ }
uart_configure_port(drv, state, uport);
num_groups = 2;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 88cb9c1..f1b9a64 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -811,8 +811,17 @@ static inline struct acpi_device *acpi_get_next_child(struct device *dev,
#endif
-#if defined(CONFIG_ACPI) && defined(CONFIG_SERIAL_EARLYCON)
+#if defined(CONFIG_ACPI)
+# if defined(CONFIG_SERIAL_EARLYCON)
int __init acpi_early_console_probe(void);
+# endif
+bool acpi_console_check(struct acpi_device *adev, char *name, int index);
+#else
+static inline bool acpi_console_check(struct acpi_device *adev, char *name,
+ int index)
+{
+ return FALSE;
+}
#endif
#endif /*_LINUX_ACPI_H*/
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists