[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1441693083-8440-1-git-send-email-chunfeng.yun@mediatek.com>
Date: Tue, 8 Sep 2015 14:17:58 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Mathias Nyman <mathias.nyman@...el.com>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Felipe Balbi <balbi@...com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Roger Quadros <rogerq@...com>, <linux-usb@...r.kernel.org>,
<linux-mediatek@...ts.infradead.org>,
John Crispin <blogic@...nwrt.org>,
Daniel Kurtz <djkurtz@...omium.org>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Kishon Vijay Abraham I <kishon@...com>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: [PATCH v7 0/5] Mediatek xHCI support
The patch supports MediaTek's xHCI controller.
There are some differences from xHCI spec:
1. The interval is specified in 250 * 8ns increments for Interrupt Moderation
Interval(IMODI) of the Interrupter Moderation(IMOD) register, it is 8 times as
much as that defined in xHCI spec.
2. For the value of TD Size in Normal TRB, MTK's xHCI controller defines a
number of packets that remain to be transferred for a TD after processing all
Max packets in all previous TRBs,that means don't include the current TRB's,
but in xHCI spec it includes the current ones.
3. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK
architecture defines some extra SW scheduling parameters for HW. According to
these parameters provided by SW, the xHC can easily decide whether a
synchronous endpoint should be scheduled in a specific uFrame. The extra SW
scheduling parameters are put into reserved DWs in Slot and Endpoint Context.
And a bandwidth scheduler algorithm is added to support such feature.
A usb3.0 phy driver is also added which used by mt65xx SoCs platform, it
supports two usb2.0 ports and one usb3.0 port.
Change in v7:
1. remove xHCI timing setting which only for FPGA
2. revise xHCI scheduler algorithms
3. replace "usb" by "USB" in xHCI binding file
Change in v6:
1. get register base address of port in probe instead of of_xlate
2. enable clock in phy_init instead of probe
Change in v5:
1. descripte more exactly for each specifiers in xHCI binding
2. make use of new multi-phy feature for phy driver
Change in v4:
1. descripte more exactly for each specifiers in binding file
2. use BIT() to define a bit mask mcro
Change in v3:
1. implement generic phy
2. move opperations for IPPC and wakeup from phy driver to xHCI driver
3. seperate quirk functions into a single C file to fix up dependence issue
Change in v2:
1. Rebase to 4.2-rc1
2. Remove probe phy before add usb_hcd patch from this series due to 4.2-rc1
already fix this issue
3. add xhci mac clocks
4. add suspend/resume
5. support remote wakeup
Chunfeng Yun (5):
dt-bindings: Add usb3.0 phy binding for MT65xx SoCs
dt-bindings: Add a binding for Mediatek xHCI host controller
usb: phy: add usb3.0 phy driver for mt65xx SoCs
xhci: mediatek: support MTK xHCI host controller
arm64: dts: mediatek: add xHCI & usb phy for mt8173
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 69 ++
.../devicetree/bindings/usb/mt8173-xhci.txt | 52 ++
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 16 +
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 44 ++
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-mt65xx-usb3.c | 456 ++++++++++++
drivers/usb/host/Kconfig | 9 +
drivers/usb/host/Makefile | 4 +
drivers/usb/host/xhci-mtk-sch.c | 449 ++++++++++++
drivers/usb/host/xhci-mtk.c | 765 +++++++++++++++++++++
drivers/usb/host/xhci-mtk.h | 121 ++++
drivers/usb/host/xhci-ring.c | 35 +-
drivers/usb/host/xhci.c | 19 +-
drivers/usb/host/xhci.h | 1 +
15 files changed, 2043 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
create mode 100644 drivers/phy/phy-mt65xx-usb3.c
create mode 100644 drivers/usb/host/xhci-mtk-sch.c
create mode 100644 drivers/usb/host/xhci-mtk.c
create mode 100644 drivers/usb/host/xhci-mtk.h
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists