| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <037d81566799c9f2968e11de9a18965fe3af5156.1441955761.git.raphael.beamonte@gmail.com>
Date: Fri, 11 Sep 2015 03:29:24 -0400
From: Raphaël Beamonte <raphael.beamonte@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@...cle.com>,
Raphaël Beamonte <raphael.beamonte@...il.com>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Cristina Opriceana <cristina.opriceana@...il.com>,
Marti Bolivar <mbolivarmullen@...il.com>,
"Ragnar B. Johannsson" <ragnar@....is>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Joe Perches <joe@...ches.com>,
Navya Sri Nizamkari <navyasri.tech@...il.com>,
Luis de Bethencourt <luis@...ethencourt.com>,
Arnd Bergmann <arnd@...db.de>, Greg Donald <gdonald@...il.com>,
Ksenija Stanojevic <ksenija.stanojevic@...il.com>,
Aya Mahfouz <mahfouz.saif.elyazal@...il.com>,
Haneen Mohammed <hamohammed.sa@...il.com>,
Rene Kolarik <rene.kolarik@...il.com>,
Somya Anand <somyaanand214@...il.com>,
Vaishali Thakkar <vthakkar1994@...il.com>,
Hatice ERTÜRK <haticeerturk27@...il.com>,
Melike Yurtoglu <aysemelikeyurtoglu@...il.com>,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Subject: [PATCHv2 16/16] staging: rtl8192u: remove all code framed by symbol TO_DO_LIST
The symbol TO_DO_LIST was used in the code to frame sections
of code unused or unusable. This patch remove all code framed
by that symbol in this driver.
Signed-off-by: Raphaël Beamonte <raphael.beamonte@...il.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211.h | 4 +-
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 23 -----
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 4 -
.../staging/rtl8192u/ieee80211/rtl819x_TSProc.c | 5 +-
drivers/staging/rtl8192u/r8192U_core.c | 102 ++-------------------
drivers/staging/rtl8192u/r819xU_phy.c | 57 ------------
6 files changed, 9 insertions(+), 186 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index d481a26..28ba7d2 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1654,10 +1654,10 @@ struct ieee80211_device {
struct list_head Rx_TS_Pending_List;
struct list_head Rx_TS_Unused_List;
RX_TS_RECORD RxTsRecord[TOTAL_TS_NUM];
-//#ifdef TO_DO_LIST
+
RX_REORDER_ENTRY RxReorderEntry[128];
struct list_head RxReorder_Unused_List;
-//#endif
+
// Qos related. Added by Annie, 2005-11-01.
// PSTA_QOS pStaQos;
u8 ForcedPriority; // Force per-packet priority 1~7. (default: 0, not to force it.)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index fff8d58..7bbe934 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -318,13 +318,6 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
if (is_multicast_ether_addr(hdr->addr1))
return;
//check packet and mode later
-#ifdef TO_DO_LIST
- if(pTcb->PacketLength >= 4096)
- return;
- // For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation.
- if(!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter))
- return;
-#endif
if(!ieee->GetNmodeSupportBySecCfg(ieee->dev))
{
return;
@@ -550,22 +543,6 @@ NO_PROTECTION:
static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
cb_desc *tcb_desc)
{
-#ifdef TO_DO_LIST
- if(!IsDataFrame(pFrame))
- {
- pTcb->bTxDisableRateFallBack = true;
- pTcb->bTxUseDriverAssingedRate = true;
- pTcb->RATRIndex = 7;
- return;
- }
-
- if(pMgntInfo->ForcedDataRate!= 0)
- {
- pTcb->bTxDisableRateFallBack = true;
- pTcb->bTxUseDriverAssingedRate = true;
- return;
- }
-#endif
if(ieee->bTxDisableRateFallBack)
tcb_desc->bTxDisableRateFallBack = true;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c27397b..87b1bb9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -88,10 +88,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
ieee->bTxDisableRateFallBack = 0;
ieee->bTxUseDriverAssingedRate = 0;
-#ifdef TO_DO_LIST
- // 8190 only. Assign duration operation mode to firmware
- pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
-#endif
// 8190 only, Realtek proprietary aggregation mode
// Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
pHTInfo->bRegRT2RTAggregation = 1;//0: Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and set MPDUDensity=0(8k) for others
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index f33c743..fb493a2 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -193,7 +193,7 @@ void TSInitialize(struct ieee80211_device *ieee)
}
// Initialize unused Rx Reorder List.
INIT_LIST_HEAD(&ieee->RxReorder_Unused_List);
-//#ifdef TO_DO_LIST
+
for(count = 0; count < REORDER_ENTRY_NUM; count++)
{
list_add_tail( &pRxReorderEntry->List,&ieee->RxReorder_Unused_List);
@@ -201,7 +201,6 @@ void TSInitialize(struct ieee80211_device *ieee)
break;
pRxReorderEntry = &ieee->RxReorderEntry[count+1];
}
-//#endif
}
@@ -461,7 +460,6 @@ static void RemoveTsEntry(struct ieee80211_device *ieee, PTS_COMMON_INFO pTs,
if(TxRxSelect == RX_DIR)
{
-//#ifdef TO_DO_LIST
PRX_REORDER_ENTRY pRxReorderEntry;
PRX_TS_RECORD pRxTS = (PRX_TS_RECORD)pTs;
if(timer_pending(&pRxTS->RxPktPendingTimer))
@@ -493,7 +491,6 @@ static void RemoveTsEntry(struct ieee80211_device *ieee, PTS_COMMON_INFO pTs,
spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
}
-//#endif
}
else
{
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 0d169d0..8b7efc2 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2217,14 +2217,7 @@ static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
wireless_mode = WIRELESS_MODE_B;
}
}
-#ifdef TO_DO_LIST
- /* TODO: this function doesn't work well at this time,
- * we should wait for FPGA
- */
- ActUpdateChannelAccessSetting(
- pAdapter, pHalData->CurrentWirelessMode,
- &pAdapter->MgntInfo.Info8185.ChannelAccessSetting);
-#endif
+
priv->ieee80211->mode = wireless_mode;
if (wireless_mode == WIRELESS_MODE_N_24G ||
@@ -2300,12 +2293,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
priv->ieee80211->InitialGainHandler = InitialGain819xUsb;
priv->card_type = USB;
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest) {
- pHalData->ShortRetryLimit = 7;
- pHalData->LongRetryLimit = 7;
- }
-#endif
+
priv->ShortRetryLimit = 0x30;
priv->LongRetryLimit = 0x30;
priv->EarlyRxThreshold = 7;
@@ -2321,34 +2309,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
* TRUE: SW provides them
*/
(false ? TCR_SAT : 0);
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest)
- pHalData->ReceiveConfig =
- pHalData->CSMethod |
- /* accept management/data */
- RCR_AMF | RCR_ADF |
- /* accept control frame for SW
- * AP needs PS-poll
- */
- RCR_ACF |
- /* accept BC/MC/UC */
- RCR_AB | RCR_AM | RCR_APM |
- /* accept ICV/CRC error
- * packet
- */
- RCR_AICV | RCR_ACRC32 |
- /* Max DMA Burst Size per Tx
- * DMA Burst, 7: unlimited.
- */
- ((u32)7 << RCR_MXDMA_OFFSET) |
- /* Rx FIFO Threshold,
- * 7: No Rx threshold.
- */
- (pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) |
- (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0);
- else
-#endif
priv->ReceiveConfig =
/* accept management/data */
RCR_AMF | RCR_ADF |
@@ -2808,19 +2769,10 @@ static void rtl8192_hwconfig(struct net_device *dev)
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_AUTO:
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest) {
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- } else
-#endif
- {
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
- RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- }
+ regBwOpMode = BW_OPMODE_20MHZ;
+ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
+ RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_N_24G:
/* It support CCK rate by default. CCK rate will be filtered
@@ -2994,48 +2946,6 @@ static bool rtl8192_adapter_start(struct net_device *dev)
}
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
-#ifdef TO_DO_LIST
- if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
- if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
- MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- /* Those actions will be discard in MgntActSet_RF_State
- * because of the same state
- */
- for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter,
- (RF90_RADIO_PATH_E)eRFPath,
- 0x4, 0xC00, 0x0);
- } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
- /* H/W or S/W RF OFF before sleep. */
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n",
- pMgntInfo->RfOffReason));
- MgntActSet_RF_State(Adapter,
- eRfOff,
- pMgntInfo->RfOffReason);
- } else {
- pHalData->eRFPowerState = eRfOn;
- pMgntInfo->RfOffReason = 0;
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): RF is on ----------\n"));
- }
- } else {
- if (pHalData->eRFPowerState == eRfOff) {
- MgntActSet_RF_State(Adapter,
- eRfOff,
- pMgntInfo->RfOffReason);
- /* Those actions will be discard in MgntActSet_RF_State
- * because of the same state
- */
- for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
- PHY_SetRFReg(Adapter,
- (RF90_RADIO_PATH_E)eRFPath,
- 0x4, 0xC00, 0x0);
- }
- }
-#endif
/* config RF. */
if (priv->ResetProgress == RESET_TYPE_NORESET) {
rtl8192_phy_RFConfig(dev);
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index e5dbaca..55c3577 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -523,16 +523,6 @@ void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType)
{
u32 i;
-#ifdef TO_DO_LIST
- u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
-
- if (Adapter->bInHctTest) {
- PHY_REGArrayLen = PHY_REGArrayLengthDTM;
- AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
- Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
- Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
- }
-#endif
if (ConfigType == BaseBand_Config_PHY_REG) {
for (i = 0; i < PHY_REG_1T2RArrayLength; i += 2) {
rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i],
@@ -1063,10 +1053,6 @@ static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
switch (priv->rf_chip) {
case RF_8225:
-#ifdef TO_DO_LIST
- PHY_SetRF8225CckTxPower(Adapter, powerlevel);
- PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G);
-#endif
break;
case RF_8256:
@@ -1164,47 +1150,7 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip);
break;
}
-#ifdef TO_DO_LIST
- if (bResult) {
- /* Update current RF state variable. */
- pHalData->eRFPowerState = eRFPowerState;
- switch (pHalData->RFChipID) {
- case RF_8256:
- switch (pHalData->eRFPowerState) {
- case eRfOff:
- /* If Rf off reason is from IPS,
- LED should blink with no link */
- if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
- else
- /* Turn off LED if RF is not ON. */
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
- break;
-
- case eRfOn:
- /* Turn on RF we are still linked, which might
- happen when we quickly turn off and on HW RF.
- */
- if (pMgntInfo->bMediaConnect)
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
- else
- /* Turn off LED if RF is not ON. */
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
- break;
-
- default:
- break;
- }
- break;
-
- default:
- RT_TRACE(COMP_RF, DBG_LOUD, "%s(): Unknown RF type\n",
- __func__);
- break;
- }
- }
-#endif
priv->SetRFPowerStateInProgress = false;
return bResult;
@@ -1629,9 +1575,6 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
/* <3> Set RF related register */
switch (priv->rf_chip) {
case RF_8225:
-#ifdef TO_DO_LIST
- PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW);
-#endif
break;
case RF_8256:
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists