lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1441974442-8233-23-git-send-email-peter.ujfalusi@ti.com>
Date:	Fri, 11 Sep 2015 15:27:21 +0300
From:	Peter Ujfalusi <peter.ujfalusi@...com>
To:	<vinod.koul@...el.com>, <nsekhar@...com>, <linux@....linux.org.uk>
CC:	<olof@...om.net>, <arnd@...db.de>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<dmaengine@...r.kernel.org>
Subject: [PATCH v2 22/23] dmaengine: edma: Simplify and optimize ccerr interrupt handler

No need to run through the bits in QEMR and CCERR events since they will
not trigger any action, so just clearing the errors there is fine.
In case of the missed event the loop can be optimized so we spend less time
to handle the event.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
---
 drivers/dma/edma.c | 64 ++++++++++++++++++++----------------------------------
 1 file changed, 23 insertions(+), 41 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 7ec4ec3a795a..5fd5cf924daf 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1625,6 +1625,7 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 	int i;
 	int ctlr;
 	unsigned int cnt = 0;
+	unsigned int val;
 
 	ctlr = ecc->id;
 	if (ctlr < 0)
@@ -1637,54 +1638,35 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
 
 	while (1) {
 		int j = -1;
-		if (edma_read_array(ecc, EDMA_EMR, 0))
+		if ((val = edma_read_array(ecc, EDMA_EMR, 0)))
 			j = 0;
-		else if (edma_read_array(ecc, EDMA_EMR, 1))
+		else if ((val = edma_read_array(ecc, EDMA_EMR, 1)))
 			j = 1;
 		if (j >= 0) {
-			dev_dbg(ecc->dev, "EMR%d %08x\n", j,
-				edma_read_array(ecc, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
+			unsigned long emr = val;
+
+			dev_dbg(ecc->dev, "EMR%d 0x%08x\n", j, val);
+			for (i = find_next_bit(&emr, 32, 0); i < 32;
+			     i = find_next_bit(&emr, 32, i + 1)) {
 				int k = (j << 5) + i;
-				if (edma_read_array(ecc, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ecc, EDMA_EMCR, j,
+				/* Clear the corresponding EMR bits */
+				edma_write_array(ecc, EDMA_EMCR, j, BIT(i));
+				/* Clear any SER */
+				edma_shadow0_write_array(ecc, SH_SECR, j,
 							 BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ecc, SH_SECR,
-								j, BIT(i));
-					edma_error_handler(&ecc->slave_chans[k]);
-				}
-			}
-		} else if (edma_read(ecc, EDMA_QEMR)) {
-			dev_dbg(ecc->dev, "QEMR %02x\n",
-				edma_read(ecc, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ecc, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ecc, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ecc, SH_QSECR,
-							   BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ecc, EDMA_CCERR)) {
-			dev_dbg(ecc->dev, "CCERR %08x\n",
-				edma_read(ecc, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ecc, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ecc, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
+				edma_error_handler(&ecc->slave_chans[k]);
 			}
+		} else if ((val = edma_read(ecc, EDMA_QEMR))) {
+			dev_dbg(ecc->dev, "QEMR 0x%02x\n", val);
+			/* Not reported, just clear the interrupt reason. */
+			edma_write(ecc, EDMA_QEMCR, val);
+			edma_shadow0_write(ecc, SH_QSECR, val);
+		} else if ((val = edma_read(ecc, EDMA_CCERR))) {
+			dev_warn(ecc->dev, "CCERR 0x%08x\n", val);
+			/* Not reported, just clear the interrupt reason. */
+			edma_write(ecc, EDMA_CCERRCLR, val);
 		}
+
 		if (!edma_error_pending(ecc))
 			break;
 		cnt++;
-- 
2.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ