linux-kernel - Re: [PATCH v7 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1441942462.25974.0.camel@mhfsdcap03>
Date:	Fri, 11 Sep 2015 11:34:22 +0800
From:	chunfeng yun <chunfeng.yun@...iatek.com>
To:	Rob Herring <robh@...nel.org>
CC:	Mathias Nyman <mathias.nyman@...el.com>,
	Rob Herring <robh+dt@...nel.org>,
	Mark Rutland <mark.rutland@....com>,
	"Matthias Brugger" <matthias.bgg@...il.com>,
	Felipe Balbi <balbi@...com>,
	"Sascha Hauer" <s.hauer@...gutronix.de>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	"Roger Quadros" <rogerq@...com>, <linux-usb@...r.kernel.org>,
	<linux-mediatek@...ts.infradead.org>,
	John Crispin <blogic@...nwrt.org>,
	Daniel Kurtz <djkurtz@...omium.org>,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	Kishon Vijay Abraham I <kishon@...com>,
	Pawel Moll <pawel.moll@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>
Subject: Re: [PATCH v7 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx
 SoCs

Hi,
On Tue, 2015-09-08 at 19:16 -0500, Rob Herring wrote:
> On 09/08/2015 01:17 AM, Chunfeng Yun wrote:
> > add a DT binding documentation of usb3.0 phy for MT65xx
> > SoCs from Mediatek.
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> 
> One comment, otherwise:
> 
> Acked-by: Rob Herring <robh@...nel.org>
> 
> > ---
> >  .../devicetree/bindings/phy/phy-mt65xx-usb.txt     | 69 ++++++++++++++++++++++
> >  1 file changed, 69 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> > new file mode 100644
> > index 0000000..5812d20
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> > @@ -0,0 +1,69 @@
> > +mt65xx USB3.0 PHY binding
> > +--------------------------
> > +
> > +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
> > +
> > +Required properties (controller (parent) node):
> > + - compatible	: should be "mediatek,mt8173-u3phy"
> > + - reg		: offset and length of register for phy, exclude port's
> > +		  register.
> > + - clocks	: a list of phandle + clock-specifier pairs, one for each
> > +		  entry in clock-names
> > + - clock-names	: must contain
> > +		  "u3phya_ref": for reference clock of usb3.0 analog phy.
> > +
> > +Required nodes	: a sub-node is required for each port the controller
> > +		  provides. Address range information including the usual
> > +		  'reg' property is used inside these nodes to describe
> > +		  the controller's topology. These nodes are translated
> > +		  by the driver's .xlate() function.
> 
> The last sentence is Linux specific. Please remove.
> 
Ok, I will remove it later. Thanks
> > +
> > +Required properties (port (child) node):
> > +- reg		: address and length of the register set for the port.
> > +- #phy-cells	: should be 1 (See second example)
> > +		  cell after port phandle is phy type from:
> > +			- PHY_TYPE_USB2
> > +			- PHY_TYPE_USB3
> > +
> > +Example:
> > +
> > +u3phy: usb-phy@...90000 {
> > +	compatible = "mediatek,mt8173-u3phy";
> > +	reg = <0 0x11290000 0 0x800>;
> > +	clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
> > +	clock-names = "u3phya_ref";
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +	ranges;
> > +	status = "okay";
> > +
> > +	phy_port0: port@...90800 {
> > +		reg = <0 0x11290800 0 0x800>;
> > +		#phy-cells = <1>;
> > +		status = "okay";
> > +	};
> > +
> > +	phy_port1: port@...91000 {
> > +		reg = <0 0x11291000 0 0x800>;
> > +		#phy-cells = <1>;
> > +		status = "okay";
> > +	};
> > +};
> > +
> > +Specifying phy control of devices
> > +---------------------------------
> > +
> > +Device nodes should specify the configuration required in their "phys"
> > +property, containing a phandle to the phy port node and a device type;
> > +phy-names for each port are optional.
> > +
> > +Example:
> > +
> > +#include <dt-bindings/phy/phy.h>
> > +
> > +usb30: usb@...70000 {
> > +	...
> > +	phys = <&phy_port0 PHY_TYPE_USB3>;
> > +	phy-names = "usb3-0";
> > +	...
> > +};
> > 
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/