| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <900653cccf2903386a992ea2b702b04dc8205407.1442330503.git.cyrille.pitchen@atmel.com>
Date: Tue, 15 Sep 2015 17:28:00 +0200
From: Cyrille Pitchen <cyrille.pitchen@...el.com>
To: <nicolas.ferre@...el.com>, <broonie@...nel.org>,
<linux-spi@...r.kernel.org>, <dwmw2@...radead.org>,
<computersforpeace@...il.com>, <zajec5@...il.com>,
<beanhuo@...ron.com>, <juhosg@...nwrt.org>, <marex@...x.de>,
<ben@...adent.org.uk>
CC: <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<linux-mtd@...ts.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [linux-next RFC v7 2/6] mtd: spi-nor: read JEDEC ID with multiple I/O protocols
When their quad or dual I/O mode is enabled, Micron and Macronix spi-nor
memories don't reply to the regular Read ID (0x9f) command. Instead they
reply to a new dedicated command Read ID Multiple I/O (0xaf).
If the Read ID (0x9f) command fails (the read ID is all 1's or all 0's),
then the Read ID Multiple I/O (0xaf) is used, first with SPI 4-4-4 protocol
(supported by both Micron and Macronix memories), lately with SPI-2-2-2
protocol (supported only by Micron memories).
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...el.com>
---
drivers/mtd/devices/m25p80.c | 8 +-----
drivers/mtd/spi-nor/fsl-quadspi.c | 2 +-
drivers/mtd/spi-nor/nxp-spifi.c | 13 +++------
drivers/mtd/spi-nor/spi-nor.c | 59 ++++++++++++++++++++++++++++++++++-----
include/linux/mtd/spi-nor.h | 27 +++++++++++++++---
5 files changed, 81 insertions(+), 28 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 4b5d7a4655fd..1457866a4930 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -179,7 +179,6 @@ static int m25p_probe(struct spi_device *spi)
struct flash_platform_data *data;
struct m25p *flash;
struct spi_nor *nor;
- enum read_mode mode = SPI_NOR_NORMAL;
char *flash_name = NULL;
int ret;
@@ -205,11 +204,6 @@ static int m25p_probe(struct spi_device *spi)
spi_set_drvdata(spi, flash);
flash->spi = spi;
- if (spi->mode & SPI_RX_QUAD)
- mode = SPI_NOR_QUAD;
- else if (spi->mode & SPI_RX_DUAL)
- mode = SPI_NOR_DUAL;
-
if (data && data->name)
nor->mtd.name = data->name;
@@ -223,7 +217,7 @@ static int m25p_probe(struct spi_device *spi)
else
flash_name = spi->modalias;
- ret = spi_nor_scan(nor, flash_name, mode);
+ ret = spi_nor_scan(nor, flash_name, spi->mode);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 2954f89fc8be..1ded5dbe2240 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -1033,7 +1033,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, NULL, SPI_RX_QUAD);
if (ret)
goto mutex_failed;
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
index 9e82098ae644..c499f3258245 100644
--- a/drivers/mtd/spi-nor/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -272,7 +272,6 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
struct device_node *np)
{
struct mtd_part_parser_data ppdata;
- enum read_mode flash_read;
u32 ctrl, property;
u16 mode = 0;
int ret;
@@ -304,16 +303,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
SPIFI_CTRL_CSHIGH(15) |
SPIFI_CTRL_FBCLK;
- if (mode & SPI_RX_DUAL) {
+ if (mode & SPI_RX_DUAL)
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_DUAL;
- } else if (mode & SPI_RX_QUAD) {
+ else if (mode & SPI_RX_QUAD)
ctrl &= ~SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_QUAD;
- } else {
+ else
ctrl |= SPIFI_CTRL_DUAL;
- flash_read = SPI_NOR_NORMAL;
- }
switch (mode & (SPI_CPHA | SPI_CPOL)) {
case SPI_MODE_0:
@@ -349,7 +344,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
*/
nxp_spifi_dummy_id_read(&spifi->nor);
- ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
+ ret = spi_nor_scan(&spifi->nor, NULL, mode);
if (ret) {
dev_err(spifi->dev, "device scan failed\n");
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 8818d4325d20..1908038c8f2e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -20,6 +20,7 @@
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
+#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>
@@ -61,6 +62,11 @@ struct flash_info {
#define JEDEC_MFR(info) ((info)->id[0])
+struct read_id_proto {
+ enum spi_protocol proto; /* SPI protocol to read the JEDEC ID */
+ u16 mode; /* SPI controller required caps */
+};
+
static const struct flash_info *spi_nor_match_id(const char *name);
/*
@@ -701,11 +707,15 @@ static const struct flash_info spi_nor_ids[] = {
{ },
};
-static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor, u16 mode)
{
- int tmp;
+ int i, tmp;
u8 id[SPI_NOR_MAX_ID_LEN];
const struct flash_info *info;
+ static const struct read_id_proto proto[] = {
+ { SPI_PROTO_4_4_4, SPI_RX_QUAD | SPI_TX_QUAD },
+ { SPI_PROTO_2_2_2, SPI_RX_DUAL | SPI_TX_DUAL }
+ };
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
@@ -713,6 +723,35 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
return ERR_PTR(tmp);
}
+ /* Special case for Micron/Macronix qspi nor. */
+ for (i = 0; i < ARRAY_SIZE(proto); ++i) {
+ if (!((id[0] == 0xff && id[1] == 0xff && id[2] == 0xff) ||
+ (id[0] == 0x00 && id[1] == 0x00 && id[2] == 0x00)))
+ break;
+
+ /* Check whether the SPI controller supports this protocol. */
+ if ((mode & proto[i].mode) != proto[i].mode)
+ continue;
+
+ nor->erase_proto = proto[i].proto;
+ nor->read_proto = proto[i].proto;
+ nor->write_proto = proto[i].proto;
+ nor->reg_proto = proto[i].proto;
+
+ /*
+ * Multiple I/O Read ID only returns the Manufacturer ID
+ * (1 byte) and the Device ID (2 bytes). So we reset the
+ * remaining bytes.
+ */
+ memset(id, 0, sizeof(id));
+ tmp = nor->read_reg(nor, SPINOR_OP_MIO_RDID, id, 3);
+ if (tmp < 0) {
+ dev_dbg(nor->dev,
+ " error %d reading JEDEC ID (MULTI IO)\n", tmp);
+ return ERR_PTR(tmp);
+ }
+ }
+
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
@@ -999,7 +1038,7 @@ static int spi_nor_check(struct spi_nor *nor)
return 0;
}
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
+int spi_nor_scan(struct spi_nor *nor, const char *name, u16 mode)
{
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
@@ -1012,11 +1051,17 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (ret)
return ret;
+ /* Reset SPI protocol for all commands */
+ nor->erase_proto = SPI_PROTO_1_1_1;
+ nor->read_proto = SPI_PROTO_1_1_1;
+ nor->write_proto = SPI_PROTO_1_1_1;
+ nor->reg_proto = SPI_PROTO_1_1_1;
+
if (name)
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
- info = spi_nor_read_id(nor);
+ info = spi_nor_read_id(nor, mode);
if (IS_ERR_OR_NULL(info))
return -ENOENT;
@@ -1027,7 +1072,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
if (name && info->id_len) {
const struct flash_info *jinfo;
- jinfo = spi_nor_read_id(nor);
+ jinfo = spi_nor_read_id(nor, mode);
if (IS_ERR(jinfo)) {
return PTR_ERR(jinfo);
} else if (jinfo != info) {
@@ -1126,14 +1171,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
nor->flash_read = SPI_NOR_NORMAL;
/* Quad/Dual-read mode takes precedence over fast/normal */
- if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
+ if (mode & SPI_RX_QUAD && info->flags & SPI_NOR_QUAD_READ) {
ret = set_quad_mode(nor, info);
if (ret) {
dev_err(dev, "quad mode not supported\n");
return ret;
}
nor->flash_read = SPI_NOR_QUAD;
- } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
+ } else if (mode & SPI_RX_DUAL && info->flags & SPI_NOR_DUAL_READ) {
nor->flash_read = SPI_NOR_DUAL;
}
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 672595a381c5..32339e82cb9d 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -57,8 +57,9 @@
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
/* Used for Micron flashes only. */
-#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
-#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
+#define SPINOR_OP_MIO_RDID 0xaf /* Multiple I/O Read JEDEC ID */
+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
@@ -87,6 +88,16 @@ enum read_mode {
SPI_NOR_QUAD,
};
+enum spi_protocol {
+ SPI_PROTO_1_1_1, /* SPI */
+ SPI_PROTO_1_1_2, /* Dual Output */
+ SPI_PROTO_1_1_4, /* Quad Output */
+ SPI_PROTO_1_2_2, /* Dual IO */
+ SPI_PROTO_1_4_4, /* Quad IO */
+ SPI_PROTO_2_2_2, /* Dual Command */
+ SPI_PROTO_4_4_4, /* Quad Command */
+};
+
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -117,6 +128,10 @@ struct mtd_info;
* @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
+ * @erase_proto: the SPI protocol used by erase operations
+ * @read_proto: the SPI protocol used by read operations
+ * @write_proto: the SPI protocol used by write operations
+ * @reg_proto the SPI protocol used by read_reg/write_reg operations
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
@@ -143,6 +158,10 @@ struct spi_nor {
u8 read_opcode;
u8 read_dummy;
u8 program_opcode;
+ enum spi_protocol erase_proto;
+ enum spi_protocol read_proto;
+ enum spi_protocol write_proto;
+ enum spi_protocol reg_proto;
enum read_mode flash_read;
bool sst_write_second;
u32 flags;
@@ -169,7 +188,7 @@ struct spi_nor {
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
* @name: the chip type name
- * @mode: the read mode supported by the driver
+ * @mode: the bitmask or TX/RX modes supported by the driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
@@ -179,6 +198,6 @@ struct spi_nor {
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
+int spi_nor_scan(struct spi_nor *nor, const char *name, u16 mode);
#endif
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists