[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1442385697-28036-1-git-send-email-shawn.lin@rock-chips.com>
Date: Wed, 16 Sep 2015 14:41:37 +0800
From: Shawn Lin <shawn.lin@...k-chips.com>
To: jh80.chung@...sung.com, ulf.hansson@...aro.org
Cc: Vineet.Gupta1@...opsys.com, Wei Xu <xuwei5@...ilicon.com>,
Joachim Eastwood <manabian@...il.com>,
Alexey Brodkin <abrodkin@...opsys.com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Russell King <linux@....linux.org.uk>,
Jun Nie <jun.nie@...aro.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Govindraj Raja <govindraj.raja@...tec.com>,
Arnd Bergmann <arnd@...db.de>, heiko@...ech.de,
dianders@...omium.org, linux-samsung-soc@...r.kernel.org,
linux-mips@...ux-mips.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Shawn Lin <shawn.lin@...k-chips.com>
Subject: [RFC PATCH v8 02/10] mmc: dw_mmc: use macro for HCON register operations
This patch add some macros for HCON register operations
to make code more readable.
Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@...sung.com>
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/mmc/host/dw_mmc.c | 6 +++---
drivers/mmc/host/dw_mmc.h | 3 +++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 5d7a8729..100f56e 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2674,7 +2674,7 @@ static void dw_mci_init_dma(struct dw_mci *host)
* Check ADDR_CONFIG bit in HCON to find
* IDMAC address bus width
*/
- addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
+ addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON));
if (addr_config == 1) {
/* host supports IDMAC in 64-bit address mode */
@@ -3051,7 +3051,7 @@ int dw_mci_probe(struct dw_mci *host)
* Get the host data width - this assumes that HCON has been set with
* the correct values.
*/
- i = (mci_readl(host, HCON) >> 7) & 0x7;
+ i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
if (!i) {
host->push_data = dw_mci_push_data16;
host->pull_data = dw_mci_pull_data16;
@@ -3133,7 +3133,7 @@ int dw_mci_probe(struct dw_mci *host)
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
else
- host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
+ host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
/*
* Enable interrupts for command done, data over, data empty,
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 811d467..f2a88d4 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -154,6 +154,9 @@
#define DMA_INTERFACE_GDMA (0x2)
#define DMA_INTERFACE_NODMA (0x3)
#define SDMMC_GET_TRANS_MODE(x) (((x)>>16) & 0x3)
+#define SDMMC_GET_SLOT_NUM(x) ((((x)>>1) & 0x1F) + 1)
+#define SDMMC_GET_HDATA_WIDTH(x) (((x)>>7) & 0x7)
+#define SDMMC_GET_ADDR_CONFIG(x) (((x)>>27) & 0x1)
/* Internal DMAC interrupt defines */
#define SDMMC_IDMAC_INT_AI BIT(9)
#define SDMMC_IDMAC_INT_NI BIT(8)
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists