lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 16 Sep 2015 12:13:22 +0200
From:	Markus Pargmann <mpa@...gutronix.de>
To:	"Tirdea, Irina" <irina.tirdea@...el.com>
Cc:	Jonathan Cameron <jic23@...nel.org>,
	Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
	Lars-Peter Clausen <lars@...afoo.de>,
	"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"kernel@...gutronix.de" <kernel@...gutronix.de>
Subject: Re: [PATCH v2 0/4] iio: bmc150 regmap and SPI

Hi Irina,

On Wed, Sep 09, 2015 at 02:30:30PM +0000, Tirdea, Irina wrote:
> 
> 
> > -----Original Message-----
> > From: Markus Pargmann [mailto:mpa@...gutronix.de]
> > Sent: 20 August, 2015 15:50
> > To: Jonathan Cameron
> > Cc: Srinivas Pandruvada; Tirdea, Irina; Lars-Peter Clausen; linux-iio@...r.kernel.org; linux-kernel@...r.kernel.org;
> > kernel@...gutronix.de; Markus Pargmann
> > Subject: [PATCH v2 0/4] iio: bmc150 regmap and SPI
> > 
> > Hi,
> > 
> 
> Hi Markus,
> 
> I tested your patches with my BMA250E driver connected on the i2c bus .
> The code looks good and most of it works. There are a couple of issues I will mention
> below and in the individual patches.
> 
> The patches in this version no longer apply cleanly on the togreg branch of the iio tree.
> I did the rebase myself, but since there were many conflicts I will do another test
> when you send the new rebased v3.

Thank you for review and testing. I will integrate your comments and
send a rebased v3.

> 
> > this series converts the bmc150 driver to use regmap and adds an SPI interface.
> > 
> > In v1 this was part of the series "Regmap max_raw_io and bmc150 SPI support".
> > It now depends on "regmap: i2c block support".
> > 
> 
> I used the patches that were already merged in the regmap tree. This bmc150 series should
> probably wait until the regmap patches end up in Jonathan's tree, otherwise they will
> break the build.

It seems the necessary patches are already in v4.3-rc1:
	29332534e2b6 (regmap-i2c: Add smbus i2c block support)

Best Regards,

Markus

> 
> Thanks,
> Irina
> 
> > Changes in v2:
> > - Removed default values for regmap_config fields.
> > - Redesigned the fifo_transfer function to avoid running in errors first.
> > - Dropped irq checks patch as it is already mainline
> > - Core can now be built as module with autoselection of i2c and spi parts
> > 
> > As my hardware is missing an interrupt line from the SPI connected bmc150 I am
> > not able to test the iio buffer code path and the i2c code path. Tests would be
> > appreciated.
> > 
> > Best regards,
> > 
> > Markus
> > 
> > 
> > Markus Pargmann (4):
> >   iio: bmc150: Use i2c regmap
> >   iio: bcm150: Remove i2c_client from private data
> >   iio: bmc150: Split the driver into core and i2c
> >   iio: bmc150: Add SPI driver
> > 
> >  drivers/iio/accel/Kconfig                          |  14 +-
> >  drivers/iio/accel/Makefile                         |   4 +-
> >  .../accel/{bmc150-accel.c => bmc150-accel-core.c}  | 398 ++++++++-------------
> >  drivers/iio/accel/bmc150-accel-i2c.c               |  99 +++++
> >  drivers/iio/accel/bmc150-accel-spi.c               |  83 +++++
> >  drivers/iio/accel/bmc150-accel.h                   |  21 ++
> >  6 files changed, 367 insertions(+), 252 deletions(-)
> >  rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (81%)
> >  create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
> >  create mode 100644 drivers/iio/accel/bmc150-accel-spi.c
> >  create mode 100644 drivers/iio/accel/bmc150-accel.h
> > 
> > --
> > 2.4.6
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ