| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150917185248-mutt-send-email-mst@redhat.com>
Date: Thu, 17 Sep 2015 18:56:05 +0300
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-kernel@...r.kernel.org, Fam Zheng <famz@...hat.com>,
Yinghai Lu <yhlu.kernel.send@...il.com>,
Ulrich Obergfell <uobergfe@...hat.com>,
Rusty Russell <rusty@...tcorp.com.au>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
linux-pci@...r.kernel.org,
virtualization@...ts.linux-foundation.org
Subject: Re: [PATCH v7] pci: quirk to skip msi disable on shutdown
On Thu, Sep 17, 2015 at 10:44:24AM -0500, Bjorn Helgaas wrote:
> On Sun, Sep 06, 2015 at 06:32:35PM +0300, Michael S. Tsirkin wrote:
> > On some hypervisors, virtio devices tend to generate spurious interrupts
> > when switching between MSI and non-MSI mode. Normally, either MSI or
> > non-MSI is used and all is well, but during shutdown, linux disables MSI
> > which then causes an "irq %d: nobody cared" message, with irq being
> > subsequently disabled.
> >
> > Since bus mastering is already disabled at this point, disabling MSI
> > isn't actually useful for spec compliant devices: MSI interrupts are
> > in-bus memory writes so disabling Bus Master (which is already done)
> > disables these as well: after some research, it appears to be there for
> > the benefit of devices that ignore the bus master bit.
> >
> > As it's not clear how common this kind of bug is, this patch simply adds
> > a quirk, to be set by devices that wish to skip disabling msi on
> > shutdown, relying on bus master instead.
> >
> > We set this quirk in virtio core.
> >
> > Reported-by: Fam Zheng <famz@...hat.com>
> > Cc: Bjorn Helgaas <bhelgaas@...gle.com>
> > Cc: Yinghai Lu <yhlu.kernel.send@...il.com>
> > Cc: Ulrich Obergfell <uobergfe@...hat.com>
> > Cc: Rusty Russell <rusty@...tcorp.com.au>
> > Cc: "Eric W. Biederman" <ebiederm@...ssion.com>
> > Signed-off-by: Michael S. Tsirkin <mst@...hat.com>
>
> Eric, what do you think of this? You had many comments on previous
> versions.
>
> Minor comment on a comment below.
>
> > ---
> >
> >
> > changes from v6:
> > limit changes to virtio only
> > changes from v5:
> > rebased on top of pci/msi
> > fixed commit log, including comments by Bjorn
> > and adding explanation to address comments/questions by Eric
> > dropped stable Cc, this patch does not seem to qualify for stable
> > changes from v4:
> > Yijing Wang <wangyijing@...wei.com> noted that
> > early fixups rely on pci_msi_off.
> > Split out the functionality and move off the
> > required part to run early during pci_device_setup.
> > Changes from v3:
> > fix a copy-and-paste error in
> > pci: drop some duplicate code
> > other patches are unchanged
> > drop Cc stable for now
> > Changes from v2:
> > move code from probe to device enumeration
> > add patches to unexport pci_msi_off
> >
> >
> > include/linux/pci.h | 2 ++
> > drivers/pci/pci-driver.c | 6 ++++--
> > drivers/virtio/virtio_pci_common.c | 4 ++++
> > 3 files changed, 10 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index 860c751..80f3494 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -180,6 +180,8 @@ enum pci_dev_flags {
> > PCI_DEV_FLAGS_NO_BUS_RESET = (__force pci_dev_flags_t) (1 << 6),
> > /* Do not use PM reset even if device advertises NoSoftRst- */
> > PCI_DEV_FLAGS_NO_PM_RESET = (__force pci_dev_flags_t) (1 << 7),
> > + /* Do not disable MSI on shutdown, disable bus master instead */
>
> This comment doesn't really match what the patch does. The patch merely
> does "Do not disable MSI on shutdown." It doesn't "disable bus master
> instead."
>
> Bus master may be disabled elsewhere, but that is independent of the
> PCI_DEV_FLAGS_NO_MSI_SHUTDOWN flag.
Yes but I wanted to point out that bus master needs to work.
One of the reasons we don't do this patch for all devices is because
some builtin devices might have a broken bus master.
How about
"Some other means (e.g. disabling bus master) suppress interrupts."
> > + PCI_DEV_FLAGS_NO_MSI_SHUTDOWN = (__force pci_dev_flags_t) (1 << 8),
> > };
> >
> > enum pci_irq_reroute_variant {
> > diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> > index 3cb2210..59d9e40 100644
> > --- a/drivers/pci/pci-driver.c
> > +++ b/drivers/pci/pci-driver.c
> > @@ -450,8 +450,10 @@ static void pci_device_shutdown(struct device *dev)
> >
> > if (drv && drv->shutdown)
> > drv->shutdown(pci_dev);
> > - pci_msi_shutdown(pci_dev);
> > - pci_msix_shutdown(pci_dev);
> > + if (!(pci_dev->dev_flags & PCI_DEV_FLAGS_NO_MSI_SHUTDOWN)) {
> > + pci_msi_shutdown(pci_dev);
> > + pci_msix_shutdown(pci_dev);
> > + }
> >
> > #ifdef CONFIG_KEXEC
> > /*
> > diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c
> > index 78f804a..26f46c3 100644
> > --- a/drivers/virtio/virtio_pci_common.c
> > +++ b/drivers/virtio/virtio_pci_common.c
> > @@ -528,6 +528,8 @@ static int virtio_pci_probe(struct pci_dev *pci_dev,
> > if (rc)
> > goto err_register;
> >
> > + pci_dev->dev_flags |= PCI_DEV_FLAGS_NO_MSI_SHUTDOWN;
> > +
> > return 0;
> >
> > err_register:
> > @@ -546,6 +548,8 @@ static void virtio_pci_remove(struct pci_dev *pci_dev)
> > {
> > struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
> >
> > + pci_dev->dev_flags &= ~PCI_DEV_FLAGS_NO_MSI_SHUTDOWN;
> > +
> > unregister_virtio_device(&vp_dev->vdev);
> >
> > if (vp_dev->ioaddr)
> > --
> > MST
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists