lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 18 Sep 2015 17:22:39 +0200 From: Ivan Grimaldi <grimaldi.ivan@...il.com> To: a.zummo@...ertech.it, mpfj@...c.co.uk, alexandre.belloni@...e-electrons.com Cc: rtc-linux@...glegroups.com, linux-kernel@...r.kernel.org Subject: [PATCH v3 2/2] Added trickle charger device tree binding Introduce a device tree binding for specifying the trickle charger configuration for ds1339. Signed-off-by: Ivan Grimaldi <grimaldi.ivan@...il.com> --- .../devicetree/bindings/rtc/dallas,ds1390.txt | 18 +++++++ drivers/rtc/rtc-ds1390.c | 62 ++++++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/dallas,ds1390.txt diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt new file mode 100644 index 0000000..8e76f26 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt @@ -0,0 +1,18 @@ +* Dallas DS1390 SPI Serial Real-Time Clock + +Required properties: +- compatible: Should contain "dallas,ds1390". +- reg: SPI address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable for ds1390 are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + ds1390: rtc@68 { + compatible = "dallas,ds1390"; + trickle-resistor-ohms = <250>; + reg = <0>; + }; diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c index a4303b4..8daebf4 100644 --- a/drivers/rtc/rtc-ds1390.c +++ b/drivers/rtc/rtc-ds1390.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/bcd.h> #include <linux/slab.h> +#include <linux/of.h> #define DS1390_REG_100THS 0x00 #define DS1390_REG_SECONDS 0x01 @@ -40,11 +41,31 @@ #define DS1390_REG_STATUS 0x0E #define DS1390_REG_TRICKLE 0x0F +#define DS1390_TRICKLE_ENABLE_CHARGER 0xA0 +#define DS1390_TRICKLE_CHARGER_250_OHM 0x01 +#define DS1390_TRICKLE_CHARGER_2K_OHM 0x02 +#define DS1390_TRICKLE_CHARGER_4K_OHM 0x03 +#define DS1390_TRICKLE_CHARGER_NO_DIODE 0x04 +#define DS1390_TRICKLE_CHARGER_DIODE 0x08 + struct ds1390 { struct rtc_device *rtc; u8 txrx_buf[9]; /* cmd + 8 registers */ }; +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + /* MSB must be '1' to write */ + buf[0] = address | 0x80; + buf[1] = data; + + spi_write(spi, buf, 2); +} + static int ds1390_get_reg(struct device *dev, unsigned char address, unsigned char *data) { @@ -67,6 +88,44 @@ static int ds1390_get_reg(struct device *dev, unsigned char address, return 0; } +static void ds1390_trickle_of_init(struct spi_device *spi) +{ + uint32_t ohms = 0; + uint8_t value; + + if (of_property_read_u32(spi->dev.of_node, "trickle-resistor-ohms", &ohms)) + goto out; + + /* Enable charger */ + value = DS1390_TRICKLE_ENABLE_CHARGER; + if (of_property_read_bool(spi->dev.of_node, "trickle-diode-disable")) + value |= DS1390_TRICKLE_CHARGER_NO_DIODE; + else + value |= DS1390_TRICKLE_CHARGER_DIODE; + + /* Resistor select */ + switch (ohms) { + case 250: + value |= DS1390_TRICKLE_CHARGER_250_OHM; + break; + case 2000: + value |= DS1390_TRICKLE_CHARGER_2K_OHM; + break; + case 4000: + value |= DS1390_TRICKLE_CHARGER_4K_OHM; + break; + default: + dev_warn(&spi->dev, + "Unsupported ohm value %02ux in dt\n", ohms); + return; + } + + ds1390_set_reg(&spi->dev, DS1390_REG_TRICKLE, value); + +out: + return; +} + static int ds1390_read_time(struct device *dev, struct rtc_time *dt) { struct spi_device *spi = to_spi_device(dev); @@ -143,6 +202,9 @@ static int ds1390_probe(struct spi_device *spi) return res; } + if (spi->dev.of_node) + ds1390_trickle_of_init(spi); + chip->rtc = devm_rtc_device_register(&spi->dev, "ds1390", &ds1390_rtc_ops, THIS_MODULE); if (IS_ERR(chip->rtc)) { -- 2.5.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists