[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20150919171717.050272311@linuxfoundation.org>
Date: Sat, 19 Sep 2015 10:28:19 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Michael van der Westhuizen <michael@...rt-africa.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mark Brown <broonie@...nel.org>
Subject: [PATCH 4.2 059/120] spi: dw: Allow interface drivers to limit data I/O to word sizes
4.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael van der Westhuizen <michael@...rt-africa.com>
commit c4fe57f76269dbb2af135071513f260ca40229a3 upstream.
The commit dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit
accesses") changed all 16bit accesses in the DW_apb_ssi driver to 32bit.
This, unfortunately, breaks data register access on picoXcell, where the
DW IP needs data register accesses to be word accesses (all other
accesses appear to be OK).
This change introduces a new master variable to allow interface drivers
to specify that 16bit data transfer I/O is required. This change also
introduces the ability to set this variable via device tree bindings in
the MMIO interface driver. Both the core and the MMIO interface driver
default to the current 32bit behaviour.
Before this change, on a picoXcell pc3x3:
spi_master spi32766: interrupt_transfer: fifo overrun/underrun
m25p80 spi32766.0: error -5 reading 9f
m25p80: probe of spi32766.0 failed with error -5
After this change:
m25p80 spi32766.0: m25p40 (512 Kbytes)
Fixes: dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit accesses")
Signed-off-by: Michael van der Westhuizen <michael@...rt-africa.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Signed-off-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/spi/spi-dw-mmio.c | 3 +++
drivers/spi/spi-dw.c | 4 ++--
drivers/spi/spi-dw.h | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 40 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -74,6 +74,9 @@ static int dw_spi_mmio_probe(struct plat
dws->max_freq = clk_get_rate(dwsmmio->clk);
+ of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+ &dws->reg_io_width);
+
num_cs = 4;
if (pdev->dev.of_node)
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -194,7 +194,7 @@ static void dw_writer(struct dw_spi *dws
else
txw = *(u16 *)(dws->tx);
}
- dw_writel(dws, DW_SPI_DR, txw);
+ dw_write_io_reg(dws, DW_SPI_DR, txw);
dws->tx += dws->n_bytes;
}
}
@@ -205,7 +205,7 @@ static void dw_reader(struct dw_spi *dws
u16 rxw;
while (max--) {
- rxw = dw_readl(dws, DW_SPI_DR);
+ rxw = dw_read_io_reg(dws, DW_SPI_DR);
/* Care rx only if the transfer's original "rx" is not null */
if (dws->rx_end - dws->len) {
if (dws->n_bytes == 1)
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -109,6 +109,7 @@ struct dw_spi {
u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
+ u32 reg_io_width; /* DR I/O width in bytes */
u16 bus_num;
u16 num_cs; /* supported slave numbers */
@@ -145,11 +146,45 @@ static inline u32 dw_readl(struct dw_spi
return __raw_readl(dws->regs + offset);
}
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+ return __raw_readw(dws->regs + offset);
+}
+
static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
{
__raw_writel(val, dws->regs + offset);
}
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+ __raw_writew(val, dws->regs + offset);
+}
+
+static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
+{
+ switch (dws->reg_io_width) {
+ case 2:
+ return dw_readw(dws, offset);
+ case 4:
+ default:
+ return dw_readl(dws, offset);
+ }
+}
+
+static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
+{
+ switch (dws->reg_io_width) {
+ case 2:
+ dw_writew(dws, offset, val);
+ break;
+ case 4:
+ default:
+ dw_writel(dws, offset, val);
+ break;
+ }
+}
+
static inline void spi_enable_chip(struct dw_spi *dws, int enable)
{
dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists