| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 21 Sep 2015 12:55:15 +0200
From: Markus Pargmann <mpa@...gutronix.de>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Irina Tirdea <irina.tirdea@...el.com>,
Lars-Peter Clausen <lars@...afoo.de>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
kernel@...gutronix.de, Markus Pargmann <mpa@...gutronix.de>
Subject: [PATCH v3 3/4] iio: bmc150: Split the driver into core and i2c
Signed-off-by: Markus Pargmann <mpa@...gutronix.de>
---
drivers/iio/accel/Kconfig | 9 +-
drivers/iio/accel/Makefile | 3 +-
.../accel/{bmc150-accel.c => bmc150-accel-core.c} | 85 ++++-------------
drivers/iio/accel/bmc150-accel-i2c.c | 102 +++++++++++++++++++++
drivers/iio/accel/bmc150-accel.h | 20 ++++
5 files changed, 145 insertions(+), 74 deletions(-)
rename drivers/iio/accel/{bmc150-accel.c => bmc150-accel-core.c} (96%)
create mode 100644 drivers/iio/accel/bmc150-accel-i2c.c
create mode 100644 drivers/iio/accel/bmc150-accel.h
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 3ff2c83f7492..280635545240 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -19,21 +19,22 @@ config BMA180
config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
- depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP
- select REGMAP_I2C
+ select BMC150_ACCEL_I2C if I2C
help
Say yes here to build support for the following Bosch accelerometers:
BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
- Currently this only supports the device via an i2c interface.
-
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing accelerometer part, which has
its own address and register map.
+config BMC150_ACCEL_I2C
+ tristate
+ select REGMAP_I2C
+
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index ebd2675b2a02..5ef8bdbad092 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -4,7 +4,8 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_BMA180) += bma180.o
-obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel.o
+obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
+obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
obj-$(CONFIG_KXSD9) += kxsd9.o
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel-core.c
similarity index 96%
rename from drivers/iio/accel/bmc150-accel.c
rename to drivers/iio/accel/bmc150-accel-core.c
index 425885dc6800..f492d2a4bce5 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -37,6 +37,8 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/regmap.h>
+#include "bmc150-accel.h"
+
#define BMC150_ACCEL_DRV_NAME "bmc150_accel"
#define BMC150_ACCEL_IRQ_NAME "bmc150_accel_event"
#define BMC150_ACCEL_GPIO_NAME "bmc150_accel_int"
@@ -1015,15 +1017,6 @@ static const struct iio_chan_spec bmc150_accel_channels[] =
static const struct iio_chan_spec bma280_accel_channels[] =
BMC150_ACCEL_CHANNELS(14);
-enum {
- bmc150,
- bmi055,
- bma255,
- bma250e,
- bma222e,
- bma280,
-};
-
static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
[bmc150] = {
.name = "BMC150A",
@@ -1576,33 +1569,23 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
return 0;
}
-static int bmc150_accel_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
+ const char *name, bool block_supported)
{
struct bmc150_accel_data *data;
struct iio_dev *indio_dev;
int ret;
- const char *name = NULL;
- struct device *dev;
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
- i2c_set_clientdata(client, indio_dev);
- data->dev = &client->dev;
- dev = &client->dev;
- data->irq = client->irq;
-
- data->regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
- if (IS_ERR(data->regmap)) {
- dev_err(dev, "Failed to initialize i2c regmap\n");
- return PTR_ERR(data->regmap);
- }
+ dev_set_drvdata(dev, indio_dev);
+ data->dev = dev;
+ data->irq = irq;
- if (id)
- name = id->name;
+ data->regmap = regmap;
ret = bmc150_accel_chip_init(data);
if (ret < 0)
@@ -1659,9 +1642,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
if (ret)
goto err_buffer_cleanup;
- if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
- i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ if (block_supported) {
indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
indio_dev->info = &bmc150_accel_info_fifo;
indio_dev->buffer->attrs = bmc150_accel_fifo_attributes;
@@ -1670,7 +1651,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
ret = iio_device_register(indio_dev);
if (ret < 0) {
- dev_err(data->dev, "Unable to register iio device\n");
+ dev_err(dev, "Unable to register iio device\n");
goto err_trigger_unregister;
}
@@ -1693,10 +1674,11 @@ err_buffer_cleanup:
return ret;
}
+EXPORT_SYMBOL_GPL(bmc150_accel_core_probe);
-static int bmc150_accel_remove(struct i2c_client *client)
+int bmc150_accel_core_remove(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmc150_accel_data *data = iio_priv(indio_dev);
pm_runtime_disable(data->dev);
@@ -1715,6 +1697,7 @@ static int bmc150_accel_remove(struct i2c_client *client)
return 0;
}
+EXPORT_SYMBOL_GPL(bmc150_accel_core_remove);
#ifdef CONFIG_PM_SLEEP
static int bmc150_accel_suspend(struct device *dev)
@@ -1785,48 +1768,12 @@ static int bmc150_accel_runtime_resume(struct device *dev)
}
#endif
-static const struct dev_pm_ops bmc150_accel_pm_ops = {
+const struct dev_pm_ops bmc150_accel_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(bmc150_accel_suspend, bmc150_accel_resume)
SET_RUNTIME_PM_OPS(bmc150_accel_runtime_suspend,
bmc150_accel_runtime_resume, NULL)
};
-static const struct acpi_device_id bmc150_accel_acpi_match[] = {
- {"BSBA0150", bmc150},
- {"BMC150A", bmc150},
- {"BMI055A", bmi055},
- {"BMA0255", bma255},
- {"BMA250E", bma250e},
- {"BMA222E", bma222e},
- {"BMA0280", bma280},
- { },
-};
-MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
-
-static const struct i2c_device_id bmc150_accel_id[] = {
- {"bmc150_accel", bmc150},
- {"bmi055_accel", bmi055},
- {"bma255", bma255},
- {"bma250e", bma250e},
- {"bma222e", bma222e},
- {"bma280", bma280},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
-
-static struct i2c_driver bmc150_accel_driver = {
- .driver = {
- .name = BMC150_ACCEL_DRV_NAME,
- .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
- .pm = &bmc150_accel_pm_ops,
- },
- .probe = bmc150_accel_probe,
- .remove = bmc150_accel_remove,
- .id_table = bmc150_accel_id,
-};
-module_i2c_driver(bmc150_accel_driver);
-
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("BMC150 accelerometer driver");
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
new file mode 100644
index 000000000000..b41404ba32fc
--- /dev/null
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -0,0 +1,102 @@
+/*
+ * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips:
+ * - BMC150
+ * - BMI055
+ * - BMA255
+ * - BMA250E
+ * - BMA222E
+ * - BMA280
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+
+#include "bmc150-accel.h"
+
+static const struct regmap_config bmc150_i2c_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int bmc150_accel_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ const char *name = NULL;
+ bool block_supported =
+ i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
+ i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK);
+
+ regmap = devm_regmap_init_i2c(client, &bmc150_i2c_regmap_conf);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to initialize i2c regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ if (id)
+ name = id->name;
+
+ return bmc150_accel_core_probe(&client->dev, regmap, client->irq, name,
+ block_supported);
+}
+
+static int bmc150_accel_remove(struct i2c_client *client)
+{
+ return bmc150_accel_core_remove(&client->dev);
+}
+
+static const struct acpi_device_id bmc150_accel_acpi_match[] = {
+ {"BSBA0150", bmc150},
+ {"BMC150A", bmc150},
+ {"BMI055A", bmi055},
+ {"BMA0255", bma255},
+ {"BMA250E", bma250e},
+ {"BMA222E", bma222e},
+ {"BMA0280", bma280},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
+
+static const struct i2c_device_id bmc150_accel_id[] = {
+ {"bmc150_accel", bmc150},
+ {"bmi055_accel", bmi055},
+ {"bma255", bma255},
+ {"bma250e", bma250e},
+ {"bma222e", bma222e},
+ {"bma280", bma280},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
+
+static struct i2c_driver bmc150_accel_driver = {
+ .driver = {
+ .name = "bmc150_accel_i2c",
+ .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
+ .pm = &bmc150_accel_pm_ops,
+ },
+ .probe = bmc150_accel_probe,
+ .remove = bmc150_accel_remove,
+ .id_table = bmc150_accel_id,
+};
+module_i2c_driver(bmc150_accel_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
new file mode 100644
index 000000000000..ba0335987f94
--- /dev/null
+++ b/drivers/iio/accel/bmc150-accel.h
@@ -0,0 +1,20 @@
+#ifndef _BMC150_ACCEL_H_
+#define _BMC150_ACCEL_H_
+
+struct regmap;
+
+enum {
+ bmc150,
+ bmi055,
+ bma255,
+ bma250e,
+ bma222e,
+ bma280,
+};
+
+int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
+ const char *name, bool block_supported);
+int bmc150_accel_core_remove(struct device *dev);
+extern const struct dev_pm_ops bmc150_accel_pm_ops;
+
+#endif /* _BMC150_ACCEL_H_ */
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists