Message-ID: <20150921134515.GA970@fixme-laptop.cn.ibm.com>
Date:	Mon, 21 Sep 2015 21:45:15 +0800
From:	Boqun Feng <boqun.feng@...il.com>
To:	Will Deacon <will.deacon@....com>
Cc:	Peter Zijlstra <peterz@...radead.org>,
	"Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>,
	"linux-arch@...r.kernel.org" <linux-arch@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] barriers: introduce smp_mb__release_acquire and update
 documentation

On Thu, Sep 17, 2015 at 07:00:01PM +0100, Will Deacon wrote:
> On Thu, Sep 17, 2015 at 03:50:12AM +0100, Boqun Feng wrote:
> > On Wed, Sep 16, 2015 at 12:07:06PM +0100, Will Deacon wrote:
> > > On Wed, Sep 16, 2015 at 11:43:14AM +0100, Peter Zijlstra wrote:
> > > > On Wed, Sep 16, 2015 at 11:29:08AM +0100, Will Deacon wrote:
> > > > > > Indeed, that is a hole in the definition, that I think we should close.
> > > > 
> > > > > I'm struggling to understand the hole, but here's my intuition. If an
> > > > > ACQUIRE on CPUx reads from a RELEASE by CPUy, then I'd expect CPUx to
> > > > > observe all memory accessed performed by CPUy prior to the RELEASE
> > > > > before it observes the RELEASE itself, regardless of this new barrier.
> > > > > I think this matches what we currently have in memory-barriers.txt (i.e.
> > > > > acquire/release are neither transitive or multi-copy atomic).
> > > > 
> > > > Ah agreed. I seem to have gotten my brain in a tangle.
> > > > 
> > > > Basically where a program order release+acquire relies on an address
> > > > dependency, a cross cpu release+acquire relies on causality. If we
> > > > observe the release, we must also observe everything prior to it etc.
> > > 
> > > Yes, and crucially, the "everything prior to it" only encompasses accesses
> > > made by the releasing CPU itself (in the absence of other barriers and
> > > synchronisation).
> > > 
> > 
> > Just want to make sure I understand you correctly, do you mean that in
> > the following case:
> > 
> > CPU 1			CPU 2				CPU 3
> > ==============		============================	===============
> > { A = 0, B = 0 }
> > WRITE_ONCE(A,1);	r1 = READ_ONCE(A);		r2 = smp_load_acquire(&B);
> > 			smp_store_release(&B, 1);	r3 = READ_ONCE(A);
> > 
> > r1 == 1 && r2 == 1 && r3 == 0 is not prohibitted?
> > 
> > However, according to the discussion of Paul and Peter:
> > 
> > https://lkml.org/lkml/2015/9/15/707
> > 
> > I think that's prohibitted on architectures except s390 for sure. And
> > for s390, we are waiting for the maintainers to verify this. If s390
> > also prohibits this, then a release-acquire pair(on different CPUs) to
> > the same variable does guarantee transitivity.
> > 
> > Did I misunderstand you or miss something here?
> 
> That certainly works on arm and arm64, so if it works everywhere else too,
> then we can strengthen this (but see below).
> 
> > > diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
> > > index 46a85abb77c6..794d102d06df 100644
> > > --- a/Documentation/memory-barriers.txt
> > > +++ b/Documentation/memory-barriers.txt
> > > @@ -1902,8 +1902,8 @@ the RELEASE would simply complete, thereby avoiding the deadlock.
> > >  	a sleep-unlock race, but the locking primitive needs to resolve
> > >  	such races properly in any case.
> > >  
> > > -If necessary, ordering can be enforced by use of an
> > > -smp_mb__release_acquire() barrier:
> > > +Where the RELEASE and ACQUIRE operations are performed by the same CPU,
> > > +ordering can be enforced by use of an smp_mb__release_acquire() barrier:
> > >  
> > >  	*A = a;
> > >  	RELEASE M
> > > @@ -1916,6 +1916,10 @@ in which case, the only permitted sequences are:
> > >  	STORE *A, RELEASE M, ACQUIRE N, STORE *B
> > >  	STORE *A, ACQUIRE N, RELEASE M, STORE *B
> > >  
> > > +Note that smp_mb__release_acquire() has no effect on ACQUIRE or RELEASE
> > > +operations performed by other CPUs, even if they are to the same variable.
> > > +In cases where transitivity is required, smp_mb() should be used explicitly.
> > > +
> > 
> > Then, IIRC, the memory order effect of RELEASE+ACQUIRE should be:
> 
> [updated from your reply]
> 
> > If an ACQUIRE loads the value of stored by a RELEASE, then after the
> > ACQUIRE operation, the CPU executing the ACQUIRE operation will perceive
> > all the memory operations that have been perceived by the CPU executing
> > the RELEASE operation before the RELEASE operation. 
> > 
> > Which means a release+acquire pair to the same variable guarantees
> > transitivity.
> 
> Almost, but on arm64 at least, "all the memory operations" above doesn't
> include reads by other CPUs. I'm struggling to figure out whether that's
> actually an issue.
> 

Ah.. that's indeed an issue! for example:

CPU 0			CPU 1				CPU 2
=====================	==========================	================
{a = 0, b = 0, c = 0}
r1 = READ_ONCE(a);	WRITE_ONCE(b, 1);		r3 = smp_load_acquire(&c);
smp_rmb();		smp_store_release(&c, 1);	WRITE_ONCE(a, 1);
r2 = READ_ONCE(b)

where r1 == 1 && r2 == 0 && r3 == 1 is actually not prohibitted, at
least on POWER.

However, I think that doens't mean a release+acquire pair to the same
variable doesn't guarantee transitivity, because the transitivity is
actually broken at the smp_rmb(). But yes, my document is incorrect.
How about:

If an ACQUIRE loads the value of stored by a RELEASE, then after the
ACQUIRE operation, the CPU executing the ACQUIRE operation will perceive
all the memory operations that have been perceived by the CPU executing
the RELEASE operation *transitively* before the RELEASE operation. 
("transitively before" means that a memory operation is either executed
on the same CPU before the other, or guaranteed executed before the
other by a transitive barrier).

Which means a release+acquire pair to the same variable guarantees
transitivity.


Maybe we can avoid to use term "transitively before" here, but it's not
bad to distinguish different kinds of "before"s.

Regards,
Boqun

Download attachment "signature.asc" of type "application/pgp-signature" (474 bytes)

Powered by blists - more mailing lists