[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1442951009-7292-1-git-send-email-punitvara@gmail.com>
Date: Wed, 23 Sep 2015 01:13:29 +0530
From: Punit Vara <punitvara@...il.com>
To: Larry.Finger@...inger.net
Cc: florian.c.schilhabel@...glemail.com, gregkh@...uxfoundation.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Punit Vara <punitvara@...il.com>
Subject: [PATCH] Staging: rtl8712: ieee80211.h: Coding style warnings fix for block comments
This patch is to the ieee80211.h that fixes up following
warnings reported by checkpatch.pl :
-Block comments use * on subsequent lines
-Block comments use a trailing */ on a separate line
Signed-off-by: Punit Vara <punitvara@...il.com>
---
drivers/staging/rtl8712/ieee80211.h | 59 +++++++++++++++++++++----------------
1 file changed, 33 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
index 6e813a9..bc1040d 100644
--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
@@ -119,13 +119,15 @@ struct ieee_param {
};
#define IEEE80211_DATA_LEN 2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
-
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+/*
+ * Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ * 6.2.1.1.2.
+ *
+ * The figure in section 7.1.2 suggests a body size of up to 2312
+ * bytes is allowed, which is a bit confusing, I suspect this
+ * represents the 2304 bytes of real data, plus a possible 8 bytes of
+ * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
+ */
#define IEEE80211_HLEN 30
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
@@ -403,9 +405,11 @@ struct ieee80211_snap_hdr {
-/* NOTE: This data is for statistical purposes; not all hardware provides this
+/*
+ * NOTE: This data is for statistical purposes; not all hardware provides this
* information for frames received. Not setting these will not cause
- * any adverse affects. */
+ * any adverse affects.
+ */
struct ieee80211_rx_stats {
s8 rssi;
u8 signal;
@@ -417,10 +421,12 @@ struct ieee80211_rx_stats {
u16 len;
};
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
+/*
+ * IEEE 802.11 requires that STA supports concurrent reception of at least
* three fragmented frames. This define can be increased to support more
* concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
#define IEEE80211_FRAG_CACHE_LEN 4
struct ieee80211_frag_entry {
@@ -510,19 +516,18 @@ struct ieee80211_security {
} __packed;
/*
-
- 802.11 data frame from AP
-
- ,-------------------------------------------------------------------.
-Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
- | | tion | (BSSID) | | | ence | data | |
- `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
+ *
+ * 802.11 data frame from AP
+ *
+ * ,-------------------------------------------------------------------.
+ * Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ * |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ * | | tion | (BSSID) | | | ence | data | |
+ * `-------------------------------------------------------------------'
+ *
+ * Total: 28-2340 bytes
+ */
struct ieee80211_header_data {
u16 frame_ctl;
@@ -625,10 +630,12 @@ struct ieee80211_txb {
/* SWEEP TABLE ENTRIES NUMBER*/
#define MAX_SWEEP_TAB_ENTRIES 42
#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
-/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+/*
+ * MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
* only use 8, and then use extended rates for the remaining supported
* rates. Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
#define MAX_RATES_LENGTH ((u8)12)
#define MAX_RATES_EX_LENGTH ((u8)16)
#define MAX_NETWORK_COUNT 128
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists