| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <c1c88096cb3f6ee71048dbab44ffb9ac260b07a3.1442939410.git.christophe.leroy@c-s.fr>
Date: Tue, 22 Sep 2015 18:51:13 +0200 (CEST)
From: Christophe Leroy <christophe.leroy@....fr>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Michael Ellerman <mpe@...erman.id.au>, scottwood@...escale.com
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org
Subject: [PATCH v2 22/25] powerpc32: move xxxxx_dcache_range() functions
inline
flush/clean/invalidate _dcache_range() functions are all very
similar and are quite short. They are mainly used in __dma_sync()
perf_event locate them in the top 3 consumming functions during
heavy ethernet activity
They are good candidate for inlining, as __dma_sync() does
almost nothing but calling them
Signed-off-by: Christophe Leroy <christophe.leroy@....fr>
---
New in v2
arch/powerpc/include/asm/cacheflush.h | 55 +++++++++++++++++++++++++++--
arch/powerpc/kernel/misc_32.S | 65 -----------------------------------
arch/powerpc/kernel/ppc_ksyms.c | 2 ++
3 files changed, 54 insertions(+), 68 deletions(-)
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index 6229e6b..6169604 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -47,12 +47,61 @@ static inline void __flush_dcache_icache_phys(unsigned long physaddr)
}
#endif
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
#ifdef CONFIG_PPC32
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ */
+static inline void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned int size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned int i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbf(addr);
+ if (i)
+ mb(); /* sync */
+}
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ */
+static inline void clean_dcache_range(unsigned long start, unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned int size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned int i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbst(addr);
+ if (i)
+ mb(); /* sync */
+}
+
+/*
+ * Like above, but invalidate the D-cache. This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ */
+static inline void invalidate_dcache_range(unsigned long start,
+ unsigned long stop)
+{
+ void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+ unsigned int size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+ unsigned int i;
+
+ for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+ dcbi(addr);
+ if (i)
+ mb(); /* sync */
+}
+
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
#endif
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index ce3ca08..1728f61 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -375,71 +375,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
isync
blr
/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 202963e..0546947 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,7 +6,9 @@
#include <asm/cacheflush.h>
#include <asm/epapr_hcalls.h>
+#ifdef CONFIG_PPC64
EXPORT_SYMBOL(flush_dcache_range);
+#endif
EXPORT_SYMBOL(flush_icache_range);
EXPORT_SYMBOL(empty_zero_page);
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists