lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <D2C8DF24C22DB24BA948A8B0D097284002F2B255@SJEXCHMB05.corp.ad.broadcom.com>
Date:	Thu, 24 Sep 2015 17:28:40 +0000
From:	Roman Bacik <rbacik@...adcom.com>
To:	John Youn <John.Youn@...opsys.com>,
	Scott Branden <sbranden@...adcom.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
CC:	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	bcm-kernel-feedback-list <bcm-kernel-feedback-list@...adcom.com>
Subject: RE: [PATCH v3 0/1] USB DWC2 parity fix in isochronous mode

> -----Original Message-----
> From: John Youn [mailto:John.Youn@...opsys.com]
> Sent: September-23-15 9:21 PM
> To: Scott Branden; John Youn; Greg Kroah-Hartman; linux-
> usb@...r.kernel.org; Roman Bacik
> Cc: linux-kernel@...r.kernel.org; bcm-kernel-feedback-list
> Subject: Re: [PATCH v3 0/1] USB DWC2 parity fix in isochronous mode
> 
> On 9/10/2015 6:14 PM, Scott Branden wrote:
> > This patch contains a fix for a real world interop problem found when
> > using the Synopsis DWC2 USB controller with isochronous audio as
> > detailed in the commit message.
> >
> > Changes from v2:
> >  - created s2c_hsotg_chage_ep_iso_parity function to call function in
> > 3 places in code
> >  - used hsotg->num_of_eps instead of MAX_EPS_CHANNELS
> >
> > Changes from v1:
> >  - Address code review comments as per previous responses:
> >  - renamed parity_set to has_correct_parity and reorder some logic
> >
> >
> > Roman Bacik (1):
> >   usb: dwc2: gadget: parity fix in isochronous mode
> >
> >  drivers/usb/dwc2/core.h   |  1 +
> >  drivers/usb/dwc2/gadget.c | 58
> ++++++++++++++++++++++++++++++++++++++++++-----
> >  drivers/usb/dwc2/hw.h     |  1 +
> >  3 files changed, 54 insertions(+), 6 deletions(-)
> >
> 
> This seems to break slave mode on my platform. It seems to be dropping a
> lot of packets. I tried bInterval=4,5,6, ISO OUT.
> I'll need to take a closer look to determine why. Probably later this week.
> 
> Are you able to run in slave mode on your platform? If so can you try it out?
> 
> Regards,
> John

Our current test procedure is as follows:

Build Linux kernel with: 

Device Drivers
    - Sound Card Support 'SOUND=y': ALSA 'SND=y'
        - Generic sound devices: Dummy (/dev/null) soundcard 'SND_DUMMY=y'
    - USB support 'USB_SUPPORT=y':
        DesignWare USB2 DRD Core support 'USB_DWC2=y'
            - Gadget only mode 'USB_DWC2_PERIPHERAL=y'
        DWC2 Platform 'USB_DWC2_PLATFORM=y'
        - USB Gadget Support 'USB_GADGET=y': Audio Gadget 'USB_AUDIO=y'
    - PHY Subsystem: Broadcom Kona USB2 PHY Driver 'BCM_KONA_USB2_PHY=y'

If you have only even hosts, you can change the default micro frame parity to odd:

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index ad45b0b..80bde75 100644
@@ -2709,7 +2709,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
     switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
     case USB_ENDPOINT_XFER_ISOC:
         epctrl |= DXEPCTL_EPTYPE_ISO;
-        epctrl |= DXEPCTL_SETEVENFR;
+        epctrl |= DXEPCTL_SETODDFR;
         hs_ep->isochronous = 1;
         if (dir_in)
             hs_ep->periodic = 1;
@@ -2777,7 +2777,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
  
     /* for non control endpoints, set PID to D0 */
     if (index)
-        epctrl |= DXEPCTL_SETD0PID;
+        epctrl |= DXEPCTL_SETD1PID;
  
     dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
         __func__, epctrl);

To test OUT direction:
Host:
aplay -D plughw:2 -r 48000 -f S16_LE tone_48stereo.wav
Device:
arecord -D plughw:0 -r 48000 -f S16_LE -c 1 /tmp/rec.pcm

To test IN direction:
Host:
arecord -D plughw:2 -r 48000 -f S16_LE -c 1 /tmp/rec.pcm
Device:
aplay -D plughw:0 -r 48000 -f S16_LE /tmp/rec.pcm

If you would like, we can try to test your procedure provided you send us enough details.
Regards,

Roman

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ