| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <87F60714EC601C4C83DFF1D2E3D390A0326CC840@NTXXIAMBX02.xacn.micron.com>
Date: Fri, 25 Sep 2015 06:35:33 +0000
From: Peter Pan 潘栋 (peterpandong)
<peterpandong@...ron.com>
To: "dwmw2@...radead.org" <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
"fransklaver@...il.com" <fransklaver@...il.com>,
"wsa@...-dreams.de" <wsa@...-dreams.de>,
"zajec5@...il.com" <zajec5@...il.com>,
"boris.brezillon@...e-electrons.com"
<boris.brezillon@...e-electrons.com>,
"baruch@...s.co.il" <baruch@...s.co.il>,
"ezequiel.garcia@...e-electrons.com"
<ezequiel.garcia@...e-electrons.com>,
"kdasu.kdev@...il.com" <kdasu.kdev@...il.com>,
"rogerq@...com" <rogerq@...com>,
"asierra@...-inc.com" <asierra@...-inc.com>, bpqw <bpqw@...ron.com>
CC: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Frank Liu 刘群 (frankliu)
<frankliu@...ron.com>,
Peter Pan 潘栋 (peterpandong)
<peterpandong@...ron.com>, Kamil Debski <Kamil.Debski@...tec.com>,
"Ionela Voinescu" <Ionela.Voinescu@...tec.com>,
Bean Huo 霍斌斌 (beanhuo)
<beanhuo@...ron.com>
Subject: FW: [PATCH 01/12] mtd: nand_bbt: new header for nand family BBT
Migrating existing BBT definitions from bbm.h to nand_bbt.h
Signed-off-by: Brian Norris <computersforpeace@...il.com>
[Peter: correct misspelling. s/neccecary/necessary/]
Signed-off-by: Peter Pan <peterpandong@...ron.com>
---
include/linux/mtd/bbm.h | 96 +----------------------------------
include/linux/mtd/nand_bbt.h | 118 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 119 insertions(+), 95 deletions(-)
create mode 100644 include/linux/mtd/nand_bbt.h
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 36bb6a5..fb751d9 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -28,102 +28,8 @@
#ifndef __LINUX_MTD_BBM_H
#define __LINUX_MTD_BBM_H
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS 8
+#include <linux/mtd/nand_bbt.h>
-/**
- * struct nand_bbt_descr - bad block table descriptor
- * @options: options for this descriptor
- * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
- * when bbt is searched, then we store the found bbts pages here.
- * Its an array and supports up to 8 chips now
- * @offs: offset of the pattern in the oob area of the page
- * @veroffs: offset of the bbt version counter in the oob are of the page
- * @version: version read from the bbt page during scan
- * @len: length of the pattern, if 0 no pattern check is performed
- * @maxblocks: maximum number of blocks to search for a bbt. This number of
- * blocks is reserved at the end of the device where the tables are
- * written.
- * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- * bad) block in the stored bbt
- * @pattern: pattern to identify bad block table or factory marked good /
- * bad blocks, can be NULL, if len = 0
- *
- * Descriptor for the bad block table marker and the descriptor for the
- * pattern which identifies good and bad blocks. The assumption is made
- * that the pattern and the version count are always located in the oob area
- * of the first block.
- */
-struct nand_bbt_descr {
- int options;
- int pages[NAND_MAX_CHIPS];
- int offs;
- int veroffs;
- uint8_t version[NAND_MAX_CHIPS];
- int len;
- int maxblocks;
- int reserved_block_code;
- uint8_t *pattern;
-};
-
-/* Options for the bad block table descriptors */
-
-/* The number of bits used per block in the bbt on the device */
-#define NAND_BBT_NRBITS_MSK 0x0000000F
-#define NAND_BBT_1BIT 0x00000001
-#define NAND_BBT_2BIT 0x00000002
-#define NAND_BBT_4BIT 0x00000004
-#define NAND_BBT_8BIT 0x00000008
-/* The bad block table is in the last good block of the device */
-#define NAND_BBT_LASTBLOCK 0x00000010
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_ABSPAGE 0x00000020
-/* bbt is stored per chip on multichip devices */
-#define NAND_BBT_PERCHIP 0x00000080
-/* bbt has a version counter at offset veroffs */
-#define NAND_BBT_VERSION 0x00000100
-/* Create a bbt if none exists */
-#define NAND_BBT_CREATE 0x00000200
-/*
- * Create an empty BBT with no vendor information. Vendor's information may be
- * unavailable, for example, if the NAND controller has a different data and OOB
- * layout or if this information is already purged. Must be used in conjunction
- * with NAND_BBT_CREATE.
- */
-#define NAND_BBT_CREATE_EMPTY 0x00000400
-/* Write bbt if neccecary */
-#define NAND_BBT_WRITE 0x00002000
-/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT 0x00004000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE 0x00008000
-/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE 0x00010000
-/*
- * Use a flash based bad block table. By default, OOB identifier is saved in
- * OOB area. This option is passed to the default bad block table function.
- */
-#define NAND_BBT_USE_FLASH 0x00020000
-/*
- * Do not store flash based bad block table marker in the OOB area; store it
- * in-band.
- */
-#define NAND_BBT_NO_OOB 0x00040000
-/*
- * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
- * entire spare area. Must be used with NAND_BBT_USE_FLASH.
- */
-#define NAND_BBT_NO_OOB_BBM 0x00080000
-
-/*
- * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
- * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
- * in nand_chip.bbt_options.
- */
-#define NAND_BBT_DYNAMICSTRUCT 0x80000000
-
-/* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS 4
/*
* Constants for oob configuration
diff --git a/include/linux/mtd/nand_bbt.h b/include/linux/mtd/nand_bbt.h
new file mode 100644
index 0000000..5a65230
--- /dev/null
+++ b/include/linux/mtd/nand_bbt.h
@@ -0,0 +1,118 @@
+/*
+ * NAND family Bad Block Table support
+ *
+ * Copyright ? 2015 Broadcom Corporation
+ * Brian Norris <computersforpeace@...il.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __LINUX_MTD_NAND_BBT_H
+#define __LINUX_MTD_NAND_BBT_H
+
+/* The maximum number of NAND chips in an array */
+#define NAND_MAX_CHIPS 8
+
+/**
+ * struct nand_bbt_descr - bad block table descriptor
+ * @options: options for this descriptor
+ * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ * when bbt is searched, then we store the found bbts pages here.
+ * Its an array and supports up to 8 chips now
+ * @offs: offset of the pattern in the oob area of the page
+ * @veroffs: offset of the bbt version counter in the oob are of the page
+ * @version: version read from the bbt page during scan
+ * @len: length of the pattern, if 0 no pattern check is performed
+ * @maxblocks: maximum number of blocks to search for a bbt. This number of
+ * blocks is reserved at the end of the device where the tables are
+ * written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ * bad) block in the stored bbt
+ * @pattern: pattern to identify bad block table or factory marked good /
+ * bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+ int options;
+ int pages[NAND_MAX_CHIPS];
+ int offs;
+ int veroffs;
+ uint8_t version[NAND_MAX_CHIPS];
+ int len;
+ int maxblocks;
+ int reserved_block_code;
+ uint8_t *pattern;
+};
+
+/* Options for the bad block table descriptors */
+
+/* The number of bits used per block in the bbt on the device */
+#define NAND_BBT_NRBITS_MSK 0x0000000F
+#define NAND_BBT_1BIT 0x00000001
+#define NAND_BBT_2BIT 0x00000002
+#define NAND_BBT_4BIT 0x00000004
+#define NAND_BBT_8BIT 0x00000008
+/* The bad block table is in the last good block of the device */
+#define NAND_BBT_LASTBLOCK 0x00000010
+/* The bbt is at the given page, else we must scan for the bbt */
+#define NAND_BBT_ABSPAGE 0x00000020
+/* bbt is stored per chip on multichip devices */
+#define NAND_BBT_PERCHIP 0x00000080
+/* bbt has a version counter at offset veroffs */
+#define NAND_BBT_VERSION 0x00000100
+/* Create a bbt if none exists */
+#define NAND_BBT_CREATE 0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY 0x00000400
+/* Write bbt if necessary */
+#define NAND_BBT_WRITE 0x00002000
+/* Read and write back block contents when writing bbt */
+#define NAND_BBT_SAVECONTENT 0x00004000
+/* Search good / bad pattern on the first and the second page */
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
+/* Search good / bad pattern on the last page of the eraseblock */
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH 0x00020000
+/*
+ * Do not store flash based bad block table marker in the OOB area; store it
+ * in-band.
+ */
+#define NAND_BBT_NO_OOB 0x00040000
+/*
+ * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
+ * entire spare area. Must be used with NAND_BBT_USE_FLASH.
+ */
+#define NAND_BBT_NO_OOB_BBM 0x00080000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
+
+/* The maximum number of blocks to scan for a bbt */
+#define NAND_BBT_SCAN_MAXBLOCKS 4
+
+#endif /* __LINUX_MTD_NAND_BBT_H */
--
1.9.1
Powered by blists - more mailing lists