| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1443527855-434-1-git-send-email-javier@osg.samsung.com>
Date: Tue, 29 Sep 2015 13:57:35 +0200
From: Javier Martinez Canillas <javier@....samsung.com>
To: linux-kernel@...r.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@....samsung.com>,
Doug Anderson <dianders@...omium.org>,
Olof Johansson <olof@...om.net>,
Javier Martinez Canillas <javier@....samsung.com>,
Russell King <linux@....linux.org.uk>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
devicetree@...r.kernel.org, Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
linux-samsung-soc@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] ARM: dts: Add Exynos5250 Snow Rev5+ support
There are 2 revisions of the Exynos5250 Snow Chromebook that were shipped:
Rev4 and Rev5. The only difference between these 2 revisions is the codec,
Rev4 has a max98095 codec while Rev5 has a max98090.
Mainline only supports Rev4 so this patch moves the common device nodes to
a DTSI file and adds a DTS for the Exynos5250 Snow Rev5.
The Snow Rev5 DTS is based on the DTS found in the ChromiumOS 3.8 tree.
Signed-off-by: Javier Martinez Canillas <javier@....samsung.com>
---
The DTS in the vendor ChromeOS tree are called exynos5250-snow-rev{4,5}.dtb
but I decided to leave Rev4 as exynos5250-snow.dtb to avoid breaking u-boot
that has CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" in snow_defconfig.
Also, ChromiumOS Rev4 DTS has "google,snow-rev4" in its compatible string
but was not added in mainline since Rev4 firmware fallbacks to "google,snow"
and Rev5 searches for "google,snow-rev5". That way the compatible string
could be consistent with the DTS naming and still be able to pack both Rev4
and Rev5 FDT in the same FIT image and let the firmware pick the correct FDT.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 684 ++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 47 ++
arch/arm/boot/dts/exynos5250-snow.dts | 666 +------------------------
4 files changed, 733 insertions(+), 665 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5250-snow-common.dtsi
create mode 100644 arch/arm/boot/dts/exynos5250-snow-rev5.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5436ad479b08..a2408a63b341 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-snow-rev5.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000000..0a7f408824d8
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,684 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ aliases {
+ i2c104 = &i2c_104;
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ stdout-path = "serial3:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq &lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ vbat: vbat-fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ };
+
+ i2c-arbitrator {
+ compatible = "i2c-arb-gpio-challenge";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@...A0000}>;
+
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+ slew-delay-us = <10>;
+ wait-retry-us = <3000>;
+ wait-free-us = <50000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+ /* Use ID 104 as a hint that we're on physical bus 4 */
+ i2c_104: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ wakeup-source;
+ };
+
+ power-regulator {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ dcdc1 {
+ ti,enable-ext-control;
+ };
+ dcdc2 {
+ ti,enable-ext-control;
+ };
+ dcdc3 {
+ ti,enable-ext-control;
+ };
+ fet1: fet1 {
+ regulator-name = "vcd_led";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet4 {
+ regulator-name = "sdcard";
+ ti,overcurrent-wait = <3>;
+ };
+ fet5 {
+ regulator-name = "camout";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ ldo1 {
+ };
+ ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+
+ sound {
+ samsung,i2s-controller = <&i2s0>;
+ };
+
+ usb3_vbus_reg: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_en>;
+ enable-active-high;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <&fet1>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+
+ panel: panel {
+ compatible = "auo,b116xw03";
+ power-supply = <&fet6>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+ <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "ext_clock";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ max77686: max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+ cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ wifi_rst: wifi-rst {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+ dr_mode = "host";
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000000..ce5374547c3f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,47 @@
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+ model = "Google Snow Rev 5+";
+ compatible = "google,snow-rev5", "samsung,exynos5250", "samsung,exynos5";
+
+ sound {
+ compatible = "google,snow-audio-max98090";
+
+ samsung,model = "Snow-I2S-MAX98090";
+ samsung,audio-codec = <&max98090>;
+ };
+};
+
+&i2c_7 {
+ max98090: codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98090_irq>;
+ };
+};
+
+&pinctrl_0 {
+ max98090_irq: max98090-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 0720caab5511..99c4d2a9fcf9 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,506 +9,21 @@
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
/ {
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
- aliases {
- i2c104 = &i2c_104;
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- bootargs = "console=tty1";
- stdout-path = "serial3:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq &lid_irq>;
-
- power {
- label = "Power";
- gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- gpio-key,wakeup;
- };
-
- lid-switch {
- label = "Lid";
- gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <5>; /* EV_SW */
- linux,code = <0>; /* SW_LID */
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
- };
-
- vbat: vbat-fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vbat-supply";
- regulator-boot-on;
- };
-
- i2c-arbitrator {
- compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&{/i2c@...A0000}>;
-
- our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
- their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
- slew-delay-us = <10>;
- wait-retry-us = <3000>;
- wait-free-us = <50000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
- /* Use ID 104 as a hint that we're on physical bus 4 */
- i2c_104: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
-
- cros_ec: embedded-controller {
- compatible = "google,cros-ec-i2c";
- reg = <0x1e>;
- interrupts = <6 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_irq>;
- wakeup-source;
- };
-
- power-regulator {
- compatible = "ti,tps65090";
- reg = <0x48>;
-
- /*
- * Config irq to disable internal pulls
- * even though we run in polling mode.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&tps65090_irq>;
-
- vsys1-supply = <&vbat>;
- vsys2-supply = <&vbat>;
- vsys3-supply = <&vbat>;
- infet1-supply = <&vbat>;
- infet2-supply = <&vbat>;
- infet3-supply = <&vbat>;
- infet4-supply = <&vbat>;
- infet5-supply = <&vbat>;
- infet6-supply = <&vbat>;
- infet7-supply = <&vbat>;
- vsys-l1-supply = <&vbat>;
- vsys-l2-supply = <&vbat>;
-
- regulators {
- dcdc1 {
- ti,enable-ext-control;
- };
- dcdc2 {
- ti,enable-ext-control;
- };
- dcdc3 {
- ti,enable-ext-control;
- };
- fet1: fet1 {
- regulator-name = "vcd_led";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet2: fet2 {
- regulator-name = "video_mid";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet3 {
- regulator-name = "wwan_r";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet4 {
- regulator-name = "sdcard";
- ti,overcurrent-wait = <3>;
- };
- fet5 {
- regulator-name = "camout";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet6: fet6 {
- regulator-name = "lcd_vdd";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet7: fet7 {
- regulator-name = "video_mid_1a";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- ldo1 {
- };
- ldo2 {
- };
- };
-
- charger {
- compatible = "ti,tps65090-charger";
- };
- };
- };
- };
-
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
- samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};
-
- usb3_vbus_reg: regulator-usb3 {
- compatible = "regulator-fixed";
- regulator-name = "P5.0V_USB3CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_en>;
- enable-active-high;
- };
-
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
- power-supply = <&fet1>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- };
-
- panel: panel {
- compatible = "auo,b116xw03";
- power-supply = <&fet6>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&bridge_out>;
- };
- };
- };
-
- mmc3_pwrseq: mmc3_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
- <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
- clocks = <&max77686 MAX77686_CLK_PMIC>;
- clock-names = "ext_clock";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
- ports {
- port@0 {
- dp_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
- };
-};
-
-&ehci {
- samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
- status = "okay";
- samsung,invert-vclk;
-};
-
-&hdmi {
- hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- max77686: max77686@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
- wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c_1 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
- samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
-};
-
-&i2c_3 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
};
&i2c_7 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- ptn3460: lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
- edid-emulation = <5>;
-
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- port@1 {
- bridge_in: endpoint {
- remote-endpoint = <&dp_out>;
- };
- };
- };
- };
-
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
@@ -517,190 +32,11 @@
};
};
-&i2c_8 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mmc_0 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
-};
-
-&mmc_2 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
- cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- cap-sdio-irq;
- keep-power-in-suspend;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
- bus-width = <4>;
- cap-sd-highspeed;
- mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
&pinctrl_0 {
- wifi_en: wifi-en {
- samsung,pins = "gpx0-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- wifi_rst: wifi-rst {
- samsung,pins = "gpx0-2";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- power_key_irq: power-key-irq {
- samsung,pins = "gpx1-3";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
max98095_en: max98095-en {
samsung,pins = "gpx1-7";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- lid_irq: lid-irq {
- samsung,pins = "gpx3-5";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
};
-
-&pinctrl_1 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
- samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
- samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
-};
-
-&spi_1 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd_dwc3 {
- dr_mode = "host";
-};
-
-&usbdrd_phy {
- vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists