[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <560AA37E.2090106@cogentembedded.com>
Date: Tue, 29 Sep 2015 17:43:10 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Chunfeng Yun <chunfeng.yun@...iatek.com>,
Mathias Nyman <mathias.nyman@...el.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Felipe Balbi <balbi@...com>,
Sascha Hauer <s.hauer@...gutronix.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Roger Quadros <rogerq@...com>, linux-usb@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
John Crispin <blogic@...nwrt.org>,
Daniel Kurtz <djkurtz@...omium.org>,
Kishon Vijay Abraham I <kishon@...com>,
Pawel Moll <pawel.moll@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH v9 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx
SoCs
Hello.
On 09/29/2015 06:01 AM, Chunfeng Yun wrote:
> add a DT binding documentation of usb3.0 phy for MT65xx
> SoCs from Mediatek.
>
> Acked-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> ---
> .../devicetree/bindings/phy/phy-mt65xx-usb.txt | 68 ++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> new file mode 100644
> index 0000000..00100cf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
> @@ -0,0 +1,68 @@
> +mt65xx USB3.0 PHY binding
> +--------------------------
> +
> +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
> +
> +Required properties (controller (parent) node):
> + - compatible : should be "mediatek,mt8173-u3phy"
> + - reg : offset and length of register for phy, exclude port's
> + register.
> + - clocks : a list of phandle + clock-specifier pairs, one for each
> + entry in clock-names
> + - clock-names : must contain
> + "u3phya_ref": for reference clock of usb3.0 analog phy.
> +
> +Required nodes : a sub-node is required for each port the controller
> + provides. Address range information including the usual
> + 'reg' property is used inside these nodes to describe
> + the controller's topology.
> +
> +Required properties (port (child) node):
> +- reg : address and length of the register set for the port.
> +- #phy-cells : should be 1 (See second example)
> + cell after port phandle is phy type from:
> + - PHY_TYPE_USB2
> + - PHY_TYPE_USB3
> +
> +Example:
> +
> +u3phy: usb-phy@...90000 {
> + compatible = "mediatek,mt8173-u3phy";
> + reg = <0 0x11290000 0 0x800>;
> + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
> + clock-names = "u3phya_ref";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
You don't describe the above 3 props neither as mandatory nor optional.
[...]
> +Specifying phy control of devices
> +---------------------------------
> +
> +Device nodes should specify the configuration required in their "phys"
> +property, containing a phandle to the phy port node and a device type;
> +phy-names for each port are optional.
> +
> +Example:
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +usb30: usb@...70000 {
> + ...
> + phys = <&phy_port0 PHY_TYPE_USB3>;
> + phy-names = "usb3-0";
> + ...
> +};
Isn't the above already described in
Documentation/devicetree/bindings/phy/phy-bindings.txt?
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists