| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1443611111-3196-6-git-send-email-w.f@huawei.com>
Date: Wed, 30 Sep 2015 19:05:08 +0800
From: Fei Wang <w.f@...wei.com>
To: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <catalin.marinas@....com>,
<will.deacon@....com>, <devicetree@...r.kernel.org>,
<linux@....linux.org.uk>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <khilman@...aro.org>,
<sameo@...ux.intel.com>, <lee.jones@...aro.org>,
<broonie@...nel.org>, <lgirdwood@...il.com>
CC: <bintian.wang@...wei.com>, <xuwei5@...ilicon.com>,
<haojian.zhuang@...aro.org>, <zhangfei.gao@...aro.org>,
<guodong.xu@...aro.org>, <jorge.ramirez-ortiz@...aro.org>,
<puck.chen@...ilicon.com>, <xuyiping@...ilicon.com>,
<kong.kongxinwei@...ilicon.com>, <z.liuxinliang@...ilicon.com>,
<william.wfei@...il.com>, <zhongkaihua@...wei.com>,
<w.f@...wei.com>
Subject: [PATCH 5/8] arm64: dts: Add Hi655x regulator config node
This patch add hi655x regulator dts file for Hi6220 SoC.
Signed-off-by: Fei Wang <w.f@...wei.com>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 245 +++++++++++++++++++++++++++++
1 file changed, 245 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 4e4830b..40f895b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -176,5 +176,250 @@
interrupt-controller;
pmu_irq_gpio = <&gpio_pmu_irq_n>;
status = "ok";
+
+ ldo2: regulator@a21 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ hisilicon,valid-modes-mask = <0x02>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x029 0x02a 0x02b>;
+ hisilicon,ctrl-data = <0x1 0x1>;
+ hisilicon,vset-regs = <0x072>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <2500000>,<2600000>,
+ <2700000>,<2800000>,
+ <2900000>,<3000000>,
+ <3100000>,<3200000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "sensor_analog";
+ };
+
+ ldo7: regulator@a26 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ hisilicon,valid-modes-mask = <0x0a>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x029 0x02a 0x02b>;
+ hisilicon,ctrl-data = <0x6 0x1>;
+ hisilicon,vset-regs = <0x078>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1800000>,<1850000>,
+ <2850000>,<2900000>,
+ <3000000>,<3100000>,
+ <3200000>,<3300000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "sd_card_io";
+ };
+
+ ldo10: regulator@a29 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ hisilicon,valid-modes-mask = <0x0a>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <360>;
+ hisilicon,ctrl-regs = <0x02c 0x02d 0x02e>;
+ hisilicon,ctrl-data = <0x1 0x1>;
+ hisilicon,vset-regs = <0x07b>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1800000>,<1850000>,
+ <1900000>,<2750000>,
+ <2800000>,<2850000>,
+ <2900000>,<3000000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "sd_card";
+ };
+
+ ldo13: regulator@a32 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo13";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ hisilicon,valid-modes-mask = <0x0a>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02c 0x02d 0x02e>;
+ hisilicon,ctrl-data = <0x4 0x1>;
+ hisilicon,vset-regs = <0x07e>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1600000>,<1650000>,
+ <1700000>,<1750000>,
+ <1800000>,<1850000>,
+ <1900000>,<1950000>;
+ hisilicon,num_consumer_supplies = <3>;
+ hisilicon,consumer-supplies = "scamera_core",
+ "mcamera_io",
+ "scamera_io";
+ };
+
+ ldo14: regulator@a33 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo14";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ hisilicon,valid-modes-mask = <0x02>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02c 0x02d 0x02e>;
+ hisilicon,ctrl-data = <0x5 0x1>;
+ hisilicon,vset-regs = <0x07f>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <2500000>,<2600000>,
+ <2700000>,<2800000>,
+ <2900000>,<3000000>,
+ <3100000>,<3200000>;
+ hisilicon,num_consumer_supplies = <3>;
+ hisilicon,consumer-supplies = "scamera_avdd",
+ "mcamera_avdd",
+ "mcamera_vcm";
+ };
+
+ ldo15: regulator@a34 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ hisilicon,valid-modes-mask = <0x0a>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02c 0x02d 0x02e>;
+ hisilicon,ctrl-data = <0x6 0x1>;
+ hisilicon,vset-regs = <0x080>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1600000>,<1650000>,
+ <1700000>,<1750000>,
+ <1800000>,<1850000>,
+ <1900000>,<1950000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "codec_analog";
+ };
+
+ ldo17: regulator@a36 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ hisilicon,valid-modes-mask = <0x02>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02f 0x030 0x031>;
+ hisilicon,ctrl-data = <0x0 0x1>;
+ hisilicon,vset-regs = <0x082>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <2500000>,<2600000>,
+ <2700000>,<2800000>,
+ <2900000>,<3000000>,
+ <3100000>,<3200000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "vibrator";
+ };
+
+ ldo19: regulator@a38 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ hisilicon,valid-modes-mask = <0x0a>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <360>;
+ hisilicon,ctrl-regs = <0x02f 0x030 0x031>;
+ hisilicon,ctrl-data = <0x2 0x1>;
+ hisilicon,vset-regs = <0x084>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1800000>,<1850000>,
+ <1900000>,<2750000>,
+ <2800000>,<2850000>,
+ <2900000>,<3000000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "emmc_vddm";
+ };
+
+ ldo21: regulator@a40 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo21"; regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ hisilicon,valid-modes-mask = <0x02>; hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02f 0x030 0x031>;
+ hisilicon,ctrl-data = <0x4 0x1>;
+ hisilicon,vset-regs = <0x086>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <1650000>,<1700000>,
+ <1750000>,<1800000>,
+ <1850000>,<1900000>,
+ <1950000>,<2000000>;
+ };
+
+ ldo22: regulator@a41 {
+ compatible = "hisilicon,hi655x-regulator-pmic";
+ regulator-name = "ldo22";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ hisilicon,valid-modes-mask = <0x02>;
+ hisilicon,valid-ops-mask = <0x01d>;
+ hisilicon,initial-mode = <0x02>;
+ hisilicon,regulator-type = <0x01>;
+
+ hisilicon,off-on-delay = <120>;
+ hisilicon,ctrl-regs = <0x02f 0x030 0x031>;
+ hisilicon,ctrl-data = <0x5 0x1>;
+ hisilicon,vset-regs = <0x087>;
+ hisilicon,vset-data = <0 0x3>;
+ hisilicon,regulator-n-vol = <8>;
+ hisilicon,vset-table = <900000>,<1000000>,
+ <1050000>,<1100000>,
+ <1150000>,<1175000>,
+ <1185000>,<1200000>;
+ hisilicon,num_consumer_supplies = <1>;
+ hisilicon,consumer-supplies = "mcamera_core";
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists