| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2677327.lnRZhqx5GI@wuerfel>
Date: Thu, 01 Oct 2015 11:52:58 +0200
From: Arnd Bergmann <arnd@...db.de>
To: linux-arm-kernel@...ts.infradead.org
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@...inx.com>,
robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
michal.simek@...inx.com, soren.brinkmann@...inx.com,
bhelgaas@...gle.com, tinamdar@....com, treding@...dia.com,
rjui@...adcom.com, Minghuan.Lian@...escale.com,
m-karicheri2@...com, hauke@...ke-m.de, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
Bharat Kumar Gogada <bharatku@...inx.com>,
Ravi Kiran Gummaluri <rgummal@...inx.com>
Subject: Re: [PATCH v2] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller
On Thursday 01 October 2015 14:29:21 Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
>
> Signed-off-by: Bharat Kumar Gogada <bharatku@...inx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@...inx.com>
> ---
> Removed unneccessary comments
> Modified setup_sspl implementation
> Added more details in binding Documentation
> ---
> .../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 49 +
> drivers/pci/host/Kconfig | 9 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-xilinx-nwl.c | 1029 ++++++++++++++++++++
> 4 files changed, 1088 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c
>
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> new file mode 100644
> index 0000000..ed87184
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> @@ -0,0 +1,49 @@
> +* Xilinx NWL PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- compatible: Should contain "xlnx,nwl-pcie-2.11"
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. The value must be 1.
> +- reg: Should contain Bridge, PCIe Controller registers location,
> + configuration sapce, and length
> +- reg-names: Must include the following entries:
> + "breg": bridge registers
> + "pcireg": PCIe controller registers
> + "cfg": configuration space region
> +- device_type: must be "pci"
> +- interrupts: Should contain NWL PCIe interrupt
> +- interrupt-names: Must include the following entries:
> + "misc": interrupt asserted when miscellaneous is recieved
> + "intx": interrupt that is asserted when an legacy interrupt is received
> + "msi_1, msi_0": interrupt asserted when msi is recieved
The msi and intx interrupts don't really belong here: For intx, please
use an interrupt-map property as the other host drivers do.
For MSI, the usual answer is that there should be a separate device node
for the MSI controller, and an msi-parent property in the PCI host.
This lets you use the same code for hosts that have a GICv2m or GICv3
that comes with its own MSI controller.
> +/**
> + * struct nwl_pcie - PCIe port information
> + *
> + * @dev: Device pointer
> + * @breg_base: IO Mapped Bridge Register Base
> + * @pcireg_base: IO Mapped PCIe controller attributes
> + * @ecam_base: IO Mapped configuration space
> + * @phys_breg_base: Physical Bridge Register Base
> + * @phys_pcie_reg_base: Physical PCIe Controller Attributes
> + * @phys_ecam_base: Physical Configuration Base
> + * @breg_size: Bridge Register space
> + * @pcie_reg_size: PCIe controller attributes space
> + * @ecam_size: PCIe Configuration space
> + * @irq_intx: Legacy interrupt number
> + * @irq_misc: Misc interrupt number
> + * @ecam_value: ECAM value
> + * @last_busno: Last Bus number configured
> + * @link_up: Link status flag
> + * @enable_msi_fifo: Enable MSI FIFO mode
> + * @bus: PCI bus
> + * @msi: MSI interrupt info
> + */
> +struct nwl_pcie {
> + struct device *dev;
> + void __iomem *breg_base;
> + void __iomem *pcireg_base;
> + void __iomem *ecam_base;
> + u32 phys_breg_base;
> + u32 phys_pcie_reg_base;
> + u32 phys_ecam_base;
These should probably be phys_addr_t.
> + * nwl_setup_sspl - Set Slot Power limit
> + *
> + * @pcie: PCIe port information
> + */
> +static int nwl_setup_sspl(struct nwl_pcie *pcie)
> +{
> + unsigned int status;
> + int retval = 0;
> +
> + do {
> + status = nwl_bridge_readl(pcie, TX_PCIE_MSG) & MSG_BUSY_BIT;
> + if (!status) {
> + /*
> + * Generate the TLP message for a single EP
> + * [TODO] Add a multi-endpoint code
> + */
> + nwl_bridge_writel(pcie, 0x0,
> + TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> + nwl_bridge_writel(pcie, 0x0,
> + TX_PCIE_MSG + TX_PCIE_MSG_SPEC_LO);
> + nwl_bridge_writel(pcie, 0x0,
> + TX_PCIE_MSG + TX_PCIE_MSG_SPEC_HI);
> + nwl_bridge_writel(pcie, 0x0,
> + TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> + /* Pattern to generate SSLP TLP */
> + nwl_bridge_writel(pcie, PATTRN_SSLP_TLP,
> + TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> + nwl_bridge_writel(pcie, RANDOM_DIGIT,
> + TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
> + TX_PCIE_MSG) | 0x1, TX_PCIE_MSG);
> + status = 0;
> + mdelay(2);
That is a really long delay. Can you use msleep(2) instead here?
> +
> +/* PCIe operations */
> +static struct pci_ops nwl_pcie_ops = {
> + .read = nwl_nwl_readl_config,
> + .write = nwl_nwl_writel_config,
> +};
If the config space access is using ECAM, you should be able to use the
generic implementation for that. I don't know how far we got in splitting
that out, but it would be nice to not duplicate that here.
> +
> +static irqreturn_t nwl_pcie_leg_handler(int irq, void *data)
> +{
> + struct nwl_pcie *pcie = (struct nwl_pcie *)data;
> + u32 leg_stat;
> +
> + /* Checking for legacy interrupts */
> + leg_stat = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> + MSGF_LEG_SR_MASKALL;
> + if (!leg_stat)
> + return IRQ_NONE;
> +
> + if (leg_stat & MSGF_LEG_SR_INTA)
> + dev_dbg(pcie->dev, "legacy interruptA\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTB)
> + dev_dbg(pcie->dev, "legacy interruptB\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTC)
> + dev_dbg(pcie->dev, "legacy interruptC\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTD)
> + dev_dbg(pcie->dev, "legacy interruptD\n");
> +
> + return IRQ_HANDLED;
> +}
This does not appear to be an appropriate implementation. I suspect what
you need to do here is to model this as an irq_chip_generic, which
should be able to handle the status/mask/pending registers and
provide the irq domain that you will need for your DT irq-map
property.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists