| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1443658603-1848-4-git-send-email-arunp@broadcom.com>
Date: Wed, 30 Sep 2015 17:16:41 -0700
From: Arun Parameswaran <arunp@...adcom.com>
To: Florian Fainelli <f.fainelli@...il.com>
CC: "David S. Miller" <davem@...emloft.net>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>,
Arun Parameswaran <arunp@...adcom.com>
Subject: [PATCH v2 3/5] net: phy: Add Broadcom phy library for common interfaces
This patch adds the Broadcom phy library to consolidate common
interfaces shared by Broadcom phy's.
Moved the common interfaces to the 'bcm-phy-lib.c' and updated
the Broadcom PHY drivers to use the new APIs.
Signed-off-by: Arun Parameswaran <arunp@...adcom.com>
---
drivers/net/phy/Kconfig | 6 ++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/bcm-phy-lib.c | 209 ++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/bcm-phy-lib.h | 37 ++++++++
drivers/net/phy/bcm63xx.c | 38 +-------
drivers/net/phy/bcm7xxx.c | 127 ++++++-------------------
drivers/net/phy/broadcom.c | 149 +++++++++---------------------
include/linux/brcmphy.h | 22 +----
8 files changed, 333 insertions(+), 256 deletions(-)
create mode 100644 drivers/net/phy/bcm-phy-lib.c
create mode 100644 drivers/net/phy/bcm-phy-lib.h
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b57f6c2..606fdc9 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -69,8 +69,12 @@ config SMSC_PHY
---help---
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+config BCM_NET_PHYLIB
+ tristate
+
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
+ select BCM_NET_PHYLIB
---help---
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481 and BCM5482 PHYs.
@@ -78,11 +82,13 @@ config BROADCOM_PHY
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
depends on BCM63XX
+ select BCM_NET_PHYLIB
---help---
Currently supports the 6348 and 6358 PHYs.
config BCM7XXX_PHY
tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+ select BCM_NET_PHYLIB
---help---
Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f4e6eb9..6932475 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
new file mode 100644
index 0000000..13e161e
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/export.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#define MII_BCM_CHANNEL_WIDTH 0x2000
+#define BCM_CL45VEN_EEE_ADV 0x3c
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+ int rc;
+
+ rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ if (rc < 0)
+ return rc;
+
+ return phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
+
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+ int val;
+
+ val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+ if (val < 0)
+ return val;
+
+ val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+
+ /* Restore default value. It's O.K. if this write fails. */
+ phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 val)
+{
+ int rc;
+ int tmp;
+
+ rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+ MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ if (rc < 0)
+ return rc;
+
+ tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+ rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+ if (rc < 0)
+ return rc;
+
+ tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+ rc = bcm_phy_write_exp(phydev, tmp, val);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
+
+int bcm_phy_read_misc(struct phy_device *phydev,
+ u16 reg, u16 chl)
+{
+ int rc;
+ int tmp;
+
+ rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+ MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ if (rc < 0)
+ return rc;
+
+ tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+ tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+ rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+ if (rc < 0)
+ return rc;
+
+ tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+ rc = bcm_phy_read_exp(phydev, tmp);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
+
+int bcm_phy_ack_intr(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Clear pending interrupts. */
+ reg = phy_read(phydev, MII_BCM54XX_ISR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
+
+int bcm_phy_config_intr(struct phy_device *phydev)
+{
+ int reg;
+
+ reg = phy_read(phydev, MII_BCM54XX_ECR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~MII_BCM54XX_ECR_IM;
+ else
+ reg |= MII_BCM54XX_ECR_IM;
+
+ return phy_write(phydev, MII_BCM54XX_ECR, reg);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
+
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
+{
+ phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+ return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+ u16 val)
+{
+ return phy_write(phydev, MII_BCM54XX_SHD,
+ MII_BCM54XX_SHD_WRITE |
+ MII_BCM54XX_SHD_VAL(shadow) |
+ MII_BCM54XX_SHD_DATA(val));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
+{
+ int val;
+
+ if (dll_pwr_down) {
+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+ }
+
+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return val;
+
+ /* Clear APD bits */
+ val &= BCM_APD_CLR_MASK;
+
+ if (phydev->autoneg == AUTONEG_ENABLE)
+ val |= BCM54XX_SHD_APD_EN;
+ else
+ val |= BCM_NO_ANEG_APD_EN;
+
+ /* Enable energy detect single link pulse for easy wakeup */
+ val |= BCM_APD_SINGLELP_EN;
+
+ /* Enable Auto Power-Down (APD) for the PHY */
+ return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
+
+int bcm_phy_enable_eee(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable EEE at PHY level */
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, (u32)val);
+
+ /* Advertise EEE */
+ val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+
+ phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, (u32)val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_eee);
+
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
new file mode 100644
index 0000000..b2091c8
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_BCM_PHY_LIB_H
+#define _LINUX_BCM_PHY_LIB_H
+
+#include <linux/phy.h>
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value);
+int bcm_phy_read_misc(struct phy_device *phydev,
+ u16 reg, u16 chl);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+ u16 val);
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
+
+int bcm_phy_ack_intr(struct phy_device *phydev);
+int bcm_phy_config_intr(struct phy_device *phydev);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
+
+int bcm_phy_enable_eee(struct phy_device *phydev);
+#endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 830ec31..86b2805 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -6,6 +6,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#include "bcm-phy-lib.h"
#include <linux/module.h>
#include <linux/phy.h>
@@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev)
return phy_write(phydev, MII_BCM63XX_IR, reg);
}
-static int bcm63xx_ack_interrupt(struct phy_device *phydev)
-{
- int reg;
-
- /* Clear pending interrupts. */
- reg = phy_read(phydev, MII_BCM63XX_IR);
- if (reg < 0)
- return reg;
-
- return 0;
-}
-
-static int bcm63xx_config_intr(struct phy_device *phydev)
-{
- int reg, err;
-
- reg = phy_read(phydev, MII_BCM63XX_IR);
- if (reg < 0)
- return reg;
-
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- reg &= ~MII_BCM63XX_IR_GMASK;
- else
- reg |= MII_BCM63XX_IR_GMASK;
-
- err = phy_write(phydev, MII_BCM63XX_IR, reg);
- return err;
-}
-
static struct phy_driver bcm63xx_driver[] = {
{
.phy_id = 0x00406000,
@@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = {
.config_init = bcm63xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm63xx_ack_interrupt,
- .config_intr = bcm63xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
/* same phy as above, with just a different OUI */
@@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = {
.config_init = bcm63xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm63xx_ack_interrupt,
- .config_intr = bcm63xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
} };
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 6b701b3..efa31a6 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -12,12 +12,12 @@
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/delay.h>
+#include "bcm-phy-lib.h"
#include <linux/bitops.h>
#include <linux/brcmphy.h>
#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
-#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
/* 40nm only register definitions */
#define MII_BCM7XXX_100TX_AUX_CTL 0x10
@@ -48,37 +48,13 @@
#define CORE_EXPB0 0xb0
-static void phy_write_exp(struct phy_device *phydev,
- u16 reg, u16 value)
-{
- phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
- phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
-static void phy_write_misc(struct phy_device *phydev,
- u16 reg, u16 chl, u16 value)
-{
- int tmp;
-
- phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-
- tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
- tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
- phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
-
- tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
- phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
-
- phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, 0x00b0, 0x0010);
+ bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
- phy_write_exp(phydev, 0x00b0, 0x0000);
+ bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
}
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
@@ -86,18 +62,18 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
- phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
/* Change Ki to 011 */
- phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
* to 111
*/
- phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+ bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
/* Adjust bias current trim by -3 */
- phy_write_misc(phydev, DSP_TAP10, 0x690b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
@@ -105,19 +81,19 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
- phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
/* write AFE_RXCONFIG_1 */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
/* write AFE_RX_LP_COUNTER */
- phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* write AFE_HPF_TRIM_OTHERS */
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
/* write AFTE_TX_CONFIG */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
return 0;
}
@@ -125,36 +101,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
{
/* AFE_RXCONFIG_0 */
- phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
/* AFE_RXCONFIG_1 */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
- phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
- phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+ bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
- phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+ bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
- phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+ bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
* offset for HT=0 code
*/
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
- phy_write_misc(phydev, DSP_TAP10, 0x011b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev);
@@ -165,24 +141,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
{
/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
- phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
- phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+ bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
- phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+ bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
* offset for HT=0 code
*/
- phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
- phy_write_misc(phydev, DSP_TAP10, 0x011b);
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev);
@@ -190,53 +166,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
return 0;
}
-static int bcm7xxx_apd_enable(struct phy_device *phydev)
-{
- int val;
-
- /* Enable powering down of the DLL during auto-power down */
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
- if (val < 0)
- return val;
-
- val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
- bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
-
- /* Enable auto-power down */
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
- if (val < 0)
- return val;
-
- val |= BCM54XX_SHD_APD_EN;
- return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
-}
-
-static int bcm7xxx_eee_enable(struct phy_device *phydev)
-{
- int val;
-
- val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr);
- if (val < 0)
- return val;
-
- /* Enable general EEE feature at the PHY level */
- val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-
- phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
- MDIO_MMD_AN, phydev->addr, val);
-
- /* Advertise supported modes */
- val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr);
-
- val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
- MDIO_MMD_AN, phydev->addr, val);
-
- return 0;
-}
-
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
@@ -273,11 +202,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
if (ret)
return ret;
- ret = bcm7xxx_eee_enable(phydev);
+ ret = bcm_phy_enable_eee(phydev);
if (ret)
return ret;
- return bcm7xxx_apd_enable(phydev);
+ return bcm_phy_enable_apd(phydev, true);
}
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 9c71295..07a6119 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -14,6 +14,7 @@
* 2 of the License, or (at your option) any later version.
*/
+#include "bcm-phy-lib.h"
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/brcmphy.h>
@@ -29,39 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
-/* Indirect register access functions for the Expansion Registers */
-static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
-{
- int val;
-
- val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
- if (val < 0)
- return val;
-
- val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
-
- /* Restore default value. It's O.K. if this write fails. */
- phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
-
- return val;
-}
-
-static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val)
-{
- int ret;
-
- ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
- if (ret < 0)
- return ret;
-
- ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
-
- /* Restore default value. It's O.K. if this write fails. */
- phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
-
- return ret;
-}
-
static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
{
return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
@@ -72,28 +40,28 @@ static int bcm50610_a0_workaround(struct phy_device *phydev)
{
int err;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0,
MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
- MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+ MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75,
MII_BCM54XX_EXP_EXP75_VDACCTRL);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96,
MII_BCM54XX_EXP_EXP96_MYST);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97,
MII_BCM54XX_EXP_EXP97_MYST);
return err;
@@ -114,7 +82,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
/* Clear bit 9 to fix a phy interop issue. */
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08,
MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
if (err < 0)
goto error;
@@ -129,12 +97,12 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
int val;
- val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+ val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75);
if (val < 0)
goto error;
val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
- err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val);
+ err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val);
}
error:
@@ -159,7 +127,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
return;
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
if (val < 0)
return;
@@ -190,9 +158,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
val |= BCM54XX_SHD_SCR3_TRDDAPD;
if (orig != val)
- bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
- val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
if (val < 0)
return;
@@ -204,7 +172,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
val &= ~BCM54XX_SHD_APD_EN;
if (orig != val)
- bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
}
static int bcm54xx_config_init(struct phy_device *phydev)
@@ -232,7 +200,7 @@ static int bcm54xx_config_init(struct phy_device *phydev)
if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
(phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
- bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+ bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
(phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
@@ -254,8 +222,8 @@ static int bcm5482_config_init(struct phy_device *phydev)
/*
* Enable secondary SerDes and its use as an LED source
*/
- reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD);
- bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD,
+ reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD);
+ bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD,
reg |
BCM5482_SHD_SSD_LEDM |
BCM5482_SHD_SSD_EN);
@@ -264,10 +232,10 @@ static int bcm5482_config_init(struct phy_device *phydev)
* Enable SGMII slave mode and auto-detection
*/
reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD;
- err = bcm54xx_exp_read(phydev, reg);
+ err = bcm_phy_read_exp(phydev, reg);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, reg, err |
+ err = bcm_phy_write_exp(phydev, reg, err |
BCM5482_SSD_SGMII_SLAVE_EN |
BCM5482_SSD_SGMII_SLAVE_AD);
if (err < 0)
@@ -277,10 +245,10 @@ static int bcm5482_config_init(struct phy_device *phydev)
* Disable secondary SerDes powerdown
*/
reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD;
- err = bcm54xx_exp_read(phydev, reg);
+ err = bcm_phy_read_exp(phydev, reg);
if (err < 0)
return err;
- err = bcm54xx_exp_write(phydev, reg,
+ err = bcm_phy_write_exp(phydev, reg,
err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
if (err < 0)
return err;
@@ -288,15 +256,15 @@ static int bcm5482_config_init(struct phy_device *phydev)
/*
* Select 1000BASE-X register set (primary SerDes)
*/
- reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE);
- bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE,
+ reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE);
+ bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE,
reg | BCM5482_SHD_MODE_1000BX);
/*
* LED1=ACTIVITYLED, LED3=LINKSPD[2]
* (Use LED1 as secondary SerDes ACTIVITY LED)
*/
- bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1,
+ bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1,
BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
@@ -334,35 +302,6 @@ static int bcm5482_read_status(struct phy_device *phydev)
return err;
}
-static int bcm54xx_ack_interrupt(struct phy_device *phydev)
-{
- int reg;
-
- /* Clear pending interrupts. */
- reg = phy_read(phydev, MII_BCM54XX_ISR);
- if (reg < 0)
- return reg;
-
- return 0;
-}
-
-static int bcm54xx_config_intr(struct phy_device *phydev)
-{
- int reg, err;
-
- reg = phy_read(phydev, MII_BCM54XX_ECR);
- if (reg < 0)
- return reg;
-
- if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- reg &= ~MII_BCM54XX_ECR_IM;
- else
- reg |= MII_BCM54XX_ECR_IM;
-
- err = phy_write(phydev, MII_BCM54XX_ECR, reg);
- return err;
-}
-
static int bcm5481_config_aneg(struct phy_device *phydev)
{
int ret;
@@ -519,8 +458,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM5421,
@@ -532,8 +471,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM5461,
@@ -545,8 +484,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM54616S,
@@ -558,8 +497,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM5464,
@@ -571,8 +510,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM5481,
@@ -584,8 +523,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = bcm5481_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM5482,
@@ -597,8 +536,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm5482_config_init,
.config_aneg = genphy_config_aneg,
.read_status = bcm5482_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM50610,
@@ -610,8 +549,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM50610M,
@@ -623,8 +562,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCM57780,
@@ -636,8 +575,8 @@ static struct phy_driver broadcom_drivers[] = {
.config_init = bcm54xx_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .ack_interrupt = bcm54xx_ack_interrupt,
- .config_intr = bcm54xx_config_intr,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_ID_BCMAC131,
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 697ca77..6a53ab9 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -138,7 +138,10 @@
/* 01010: Auto Power-Down */
#define BCM54XX_SHD_APD 0x0a
+#define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */
#define BCM54XX_SHD_APD_EN 0x0020
+#define BCM_NO_ANEG_APD_EN 0x0060 /* bits 5 & 6 */
+#define BCM_APD_SINGLELP_EN 0x0100 /* Bit 8 */
#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
/* LED3 / ~LINKSPD[2] selector */
@@ -209,25 +212,6 @@
#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */
#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
- phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
- return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow,
- u16 val)
-{
- return phy_write(phydev, MII_BCM54XX_SHD,
- MII_BCM54XX_SHD_WRITE |
- MII_BCM54XX_SHD_VAL(shadow) |
- MII_BCM54XX_SHD_DATA(val));
-}
-
#define BRCM_CL45VEN_EEE_CONTROL 0x803d
#define LPI_FEATURE_EN 0x8000
#define LPI_FEATURE_EN_DIG1000X 0x4000
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists