| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1443747025-9918-2-git-send-email-ddaney.cavm@gmail.com>
Date: Thu, 1 Oct 2015 17:50:22 -0700
From: David Daney <ddaney.cavm@...il.com>
To: linux-kernel@...r.kernel.org, Will Deacon <will.deacon@....com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Marc Zyngier <marc.zyngier@....com>,
Grant Likely <grant.likely@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Frank Rowand <frowand.list@...il.com>,
Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org
Cc: David Daney <david.daney@...ium.com>
Subject: [PATCH v4 1/4] Docs: dt: Add PCI MSI map bindings
From: Mark Rutland <mark.rutland@....com>
Currently msi-parent is used by a few bindings to describe the
relationship between a PCI root complex and a single MSI controller, but
this property does not have a generic binding document.
Additionally, msi-parent is insufficient to describe more complex
relationships between MSI controllers and devices under a root complex,
where devices may be able to target multiple MSI controllers, or where
MSI controllers use (non-probeable) sideband information to distinguish
devices.
This patch adds a generic binding for mapping PCI devices to MSI
controllers. This document covers msi-parent, and a new msi-map property
(specific to PCI*) which may be used to map devices (identified by their
Requester ID) to sideband data for each MSI controller that they may
target.
Acked-by: Marc Zyngier <marc.zyngier@....com>
Signed-off-by: Mark Rutland <mark.rutland@....com>
Signed-off-by: David Daney <david.daney@...ium.com>
---
Documentation/devicetree/bindings/pci/pci-msi.txt | 220 ++++++++++++++++++++++
1 file changed, 220 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/pci-msi.txt
diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt
new file mode 100644
index 0000000..9b3cc81
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-msi.txt
@@ -0,0 +1,220 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI devices and MSI controllers.
+
+Each PCI device under a root complex is uniquely identified by its Requester ID
+(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+MSIs may be distinguished in part through the use of sideband data accompanying
+writes. In the case of PCI devices, this sideband data may be derived from the
+Requester ID. A mechanism is required to associate a device with both the MSI
+controllers it can address, and the sideband data that will be associated with
+its writes to those controllers.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- msi-map: Maps a Requester ID to an MSI controller and associated
+ msi-specifier data. The property is an arbitrary number of tuples of
+ (rid-base,msi-controller,msi-base,length), where:
+
+ * rid-base is a single cell describing the first RID matched by the entry.
+
+ * msi-controller is a single phandle to an MSI controller
+
+ * msi-base is an msi-specifier describing the msi-specifier produced for the
+ first RID matched by the entry.
+
+ * length is a single cell describing how many consecutive RIDs are matched
+ following the rid-base.
+
+ Any RID r in the interval [rid-base, rid-base + length) is associated with
+ the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
+
+- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
+ to an msi-specifier per the msi-map property.
+
+- msi-parent: Describes the MSI parent of the root complex itself. Where
+ the root complex and MSI controller do not pass sideband data with MSI
+ writes, this property may be used to describe the MSI controller(s)
+ used by PCI devices under the root complex, if defined as such in the
+ binding for the root complex.
+
+
+Example (1)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, identity-mapped.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x10000>,
+ };
+};
+
+
+Example (2)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, masked to only the device and function bits.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x100>,
+ msi-map-mask = <0xff>
+ };
+};
+
+
+Example (3)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * ignored.
+ */
+ msi-map = <0x0000 &msi 0x0000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (4)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * negated.
+ */
+ msi-map = <0x0000 &msi 0x8000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (5)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xc 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@c {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to MSI controller a is the
+ * RID, but the high bit of the bus number is negated.
+ * The sideband data provided to MSI controller b is the
+ * RID, identity-mapped.
+ * MSI controller c is not addressable.
+ */
+ msi-map = <0x0000 &msi_a 0x8000 0x08000>,
+ <0x8000 &msi_a 0x0000 0x08000>,
+ <0x0000 &msi_b 0x0000 0x10000>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists