| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1443826665-17570-3-git-send-email-jonmason@broadcom.com>
Date: Fri, 2 Oct 2015 18:57:37 -0400
From: Jon Mason <jonmason@...adcom.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
CC: Florian Fainelli <f.fainelli@...il.com>,
Hauke Mehrtens <hauke@...ke-m.de>, Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<bcm-kernel-feedback-list@...adcom.com>
Subject: [PATCH 02/10] clk: nsp: add clock support for Broadcom Northstar Plus SoC
The Broadcom Northstar Plus SoC is architected under the iProc
architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
derived from an onboard crystal.
Signed-off-by: Jon Mason <jonmason@...adcom.com>
---
drivers/clk/bcm/Makefile | 2 +
drivers/clk/bcm/clk-nsp.c | 139 ++++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/bcm-nsp.h | 51 +++++++++++++
3 files changed, 192 insertions(+)
create mode 100644 drivers/clk/bcm/clk-nsp.c
create mode 100644 include/dt-bindings/clock/bcm-nsp.h
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 8a7a477..e258b28 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -4,3 +4,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
+obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
+obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
diff --git a/drivers/clk/bcm/clk-nsp.c b/drivers/clk/bcm/clk-nsp.c
new file mode 100644
index 0000000..708961a
--- /dev/null
+++ b/drivers/clk/bcm/clk-nsp.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include "clk-iproc.h"
+
+#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+ .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+static void __init nsp_armpll_init(struct device_node *node)
+{
+ iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
+
+static const struct iproc_pll_ctrl genpll = {
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+ .aon = aon_val(0x0, 1, 12, 0),
+ .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
+ .ndiv_int = reg_val(0x14, 20, 10),
+ .ndiv_frac = reg_val(0x14, 0, 20),
+ .pdiv = reg_val(0x18, 24, 3),
+ .status = reg_val(0x20, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_clk[] = {
+ [BCM_NSP_GENPLL_PHY_CLK] = {
+ .channel = BCM_NSP_GENPLL_PHY_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 12, 6, 18),
+ .mdiv = reg_val(0x18, 16, 8),
+ },
+ [BCM_NSP_GENPLL_ENET_SW_CLK] = {
+ .channel = BCM_NSP_GENPLL_ENET_SW_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 13, 7, 19),
+ .mdiv = reg_val(0x18, 8, 8),
+ },
+ [BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
+ .channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 14, 8, 20),
+ .mdiv = reg_val(0x18, 0, 8),
+ },
+ [BCM_NSP_GENPLL_IPROCFAST_CLK] = {
+ .channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 15, 9, 21),
+ .mdiv = reg_val(0x1c, 16, 8),
+ },
+ [BCM_NSP_GENPLL_SATA1_CLK] = {
+ .channel = BCM_NSP_GENPLL_SATA1_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 16, 10, 22),
+ .mdiv = reg_val(0x1c, 8, 8),
+ },
+ [BCM_NSP_GENPLL_SATA2_CLK] = {
+ .channel = BCM_NSP_GENPLL_SATA2_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x4, 17, 11, 23),
+ .mdiv = reg_val(0x1c, 0, 8),
+ },
+};
+
+static void __init nsp_genpll_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
+ ARRAY_SIZE(genpll_clk));
+}
+CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+ .aon = aon_val(0x0, 1, 24, 0),
+ .reset = reset_val(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
+ .ndiv_int = reg_val(0x4, 20, 8),
+ .ndiv_frac = reg_val(0x4, 0, 20),
+ .pdiv = reg_val(0x4, 28, 3),
+ .status = reg_val(0x10, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+ [BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x0, 6, 3, 9),
+ .mdiv = reg_val(0x8, 24, 8),
+ },
+ [BCM_NSP_LCPLL0_SDIO_CLK] = {
+ .channel = BCM_NSP_LCPLL0_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x0, 7, 4, 10),
+ .mdiv = reg_val(0x8, 16, 8),
+ },
+ [BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
+ .channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
+ .flags = IPROC_CLK_AON,
+ .enable = enable_val(0x0, 8, 5, 11),
+ .mdiv = reg_val(0x8, 8, 8),
+ },
+};
+
+static void __init nsp_lcpll0_clk_init(struct device_node *node)
+{
+ iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+ ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
diff --git a/include/dt-bindings/clock/bcm-nsp.h b/include/dt-bindings/clock/bcm-nsp.h
new file mode 100644
index 0000000..ad5827c
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-nsp.h
@@ -0,0 +1,51 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_NSP_H
+#define _CLOCK_BCM_NSP_H
+
+/* GENPLL clock channel ID */
+#define BCM_NSP_GENPLL 0
+#define BCM_NSP_GENPLL_PHY_CLK 1
+#define BCM_NSP_GENPLL_ENET_SW_CLK 2
+#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
+#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
+#define BCM_NSP_GENPLL_SATA1_CLK 5
+#define BCM_NSP_GENPLL_SATA2_CLK 6
+
+/* LCPLL0 clock channel ID */
+#define BCM_NSP_LCPLL0 0
+#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
+#define BCM_NSP_LCPLL0_SDIO_CLK 2
+#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
+
+#endif /* _CLOCK_BCM_NSP_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists