lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20151005082109.GA3243@x1>
Date:	Mon, 5 Oct 2015 09:21:09 +0100
From:	Lee Jones <lee.jones@...aro.org>
To:	Barry Song <21cnbao@...il.com>
Cc:	Mark Brown <broonie@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	sameo <sameo@...ux.intel.com>,
	LKML <linux-kernel@...r.kernel.org>,
	DL-SHA-WorkGroupLinux <workgroup.linux@....com>,
	Guo Zeng <Guo.Zeng@....com>, Barry Song <Baohua.Song@....com>
Subject: Re: [PATCH v2 3/3] mfd: add CSR SiRFSoC on-chip power management
 module driver

On Sun, 04 Oct 2015, Barry Song wrote:
> 2015-09-29 16:55 GMT+08:00 Lee Jones <lee.jones@...aro.org>:
> > On Tue, 29 Sep 2015, Barry Song wrote:
> >
> >> 2015-09-29 15:16 GMT+08:00 Lee Jones <lee.jones@...aro.org>:
> >> > On Tue, 29 Sep 2015, Barry Song wrote:
> >> >> >> >> +static int sirfsoc_pwrc_probe(struct platform_device *pdev)
> >> >> >> >> +{
> >> >> >> >> +     struct device_node *np = pdev->dev.of_node;
> >> >> >> >> +     const struct of_device_id *match;
> >> >> >> >> +     struct sirfsoc_pwrc_info *pwrcinfo;
> >> >> >> >> +     struct regmap_irq_chip *regmap_irq_chip;
> >> >> >> >> +     struct sirfsoc_pwrc_register *pwrc_reg;
> >> >> >> >> +     struct regmap *map;
> >> >> >> >> +     int ret;
> >> >> >> >> +     u32 base;
> >> >> >> >> +
> >> >> >> >> +     if (of_property_read_u32(np, "reg", &base))
> >> >> >> >> +             panic("unable to find base address of pwrc node in dtb\n");
> >> >> >> >
> >> >> >> > It looks like this driver should depend on OF.
> >> >> >> >
> >> >> >> > Why are you obtaining the base address manually? Use:
> >> >> >> >
> >> >> >> >   res = platform_get_resource();
> >> >> >> >   devm_ioremap_resource(res);
> >> >> >> >
> >> >> >> > ... instead.
> >> >> >>
> >> >> >> this was explained as they are not in memory space, they are behind a
> >> >> >> bus bridge.
> >> >> >
> >> >> > Use 'ranges' in the DT, then you can pull out the proper address
> >> >> > without hand rolling your own method.
> >> >>
> >> >> it seems it is not a "ranges" thing,  things behind rtciobrg is much
> >> >> like things behind USB or sdio. we need to use a rtciobrg protocol to
> >> >> do read/write.
> >> >> they can not be randomly accessed by load/store, and can't be XIP.
> >> >> they don't have any ranges in CPU memory space.
> >> >
> >> > So what's the point of 'base' then?  I assumed this was the base of
> >> > the IP registers which where memory mapped?
> >>
> >> just think we have a i2c device, and this i2c device has multi-functions.
> >> each function has a base of its register offset.
> >> actually, the base is the offset of 1st register.
> >
> > Does it every change, from device to device?

What I mean is ...

> yes. Lee. e.g:
> 
>                         rtc-iobg@...40000 {
>                                 reg = <0x18840000 0x1000>;
> 
>                                 sysrtc@...0 {

Is sysrtc always @2000, or might it be @4000 on some devices?

>                                         compatible = "sirf,prima2-sysrtc";
>                                         reg = <0x2000 0x100>;
>                                         interrupts = <0 52 0>;
>                                 };
>                                 pwrc@...0 {

Same for pwrc?

>                                         compatible = "sirf,atlas7-pwrc";
>                                         reg = <0x3000 0x100>;
>                                         interrupts = <0 32 0>;
>                                 };
> 
>                         }
> 
> 
> -barry

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ