lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <5611DA8E.5040703@tul.cz> Date: Mon, 5 Oct 2015 04:03:58 +0200 From: Petr Cvek <petr.cvek@....cz> To: Philipp Zabel <philipp.zabel@...il.com>, robert.jarzmik@...e.fr, daniel@...que.org, haojian.zhuang@...il.com, linux@....linux.org.uk Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org Subject: Re: [PATCH v4 17/26] ARM: pxa: magician: Fix wrongly enabled USB host ports Dne 3.10.2015 v 14:45 Philipp Zabel napsal(a): > Am Montag, den 28.09.2015, 23:38 +0200 schrieb Petr Cvek: >> USB host ports on the HTC Magician are wrongly enabled. Port 1 is for >> bluetooth and port 2 is for OTG (mux in the charger connector). >> >> Signed-off-by: Petr Cvek <petr.cvek@....cz> >> --- >> arch/arm/mach-pxa/magician.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach >> -pxa/magician.c >> index 8e8b122..af8133a 100644 >> --- a/arch/arm/mach-pxa/magician.c >> +++ b/arch/arm/mach-pxa/magician.c >> @@ -780,8 +780,10 @@ static struct pxamci_platform_data >> magician_mci_info = { >> >> static struct pxaohci_platform_data magician_ohci_info = { >> .port_mode = PMM_PERPORT_MODE, >> - .flags = ENABLE_PORT1 | ENABLE_PORT3 | >> POWER_CONTROL_LOW, >> + /* port1: CSR Bluetooth, port2: OTG with UDC */ >> + .flags = ENABLE_PORT1 | ENABLE_PORT2 | >> POWER_CONTROL_LOW, >> .power_budget = 0, >> + .power_on_delay = 100, >> }; > > I have only ever tested the CSR bluetooth chip, so this could be > correct, or again something that is different between the magician > variants. I don't know. If your magician has USB client directly from PXA SoC (not external PHY), then only host port 2 can be muxed with client. Intel® PXA27x Processor Family, Developer’s Manual "12.5 USB On-The-Go Operation" "Figure 12-15. USB OTG Configurations" I think there was no implementation in the Windows Mobile, but I was able to switch this mux and use a wifi usb dongle on the same connector as USB client. > > regards > Philipp > Petr -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists