[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1755198.JNkaHg87IV@vostro.rjw.lan>
Date: Wed, 07 Oct 2015 00:43:55 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Prarit Bhargava <prarit@...hat.com>,
Kristen Carlson Accardi <kristen@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org,
Viresh Kumar <viresh.kumar@...aro.org>,
linux-pm@...r.kernel.org
Subject: Re: [PATCH] cpufreq, intel_pstate, set max_sysfs_pct and min_sysfs_pct on governor switch
On Tuesday, October 06, 2015 05:49:07 PM Prarit Bhargava wrote:
> Intel CPUs will not enter higher p-states when after switching from the
> performance governor to the powersave governor, until
> /sys/devices/system/cpu/intel_pstate/min_perf_pct is set to a low value.
> This differs from previous behaviour in which a switch to the powersave
> governor would result in a low default value for min_perf_pct.
>
> The behavior of the powersave governor changed after commit a04759924e25
> ("[cpufreq] intel_pstate: honor user space min_perf_pct override on
> resume"). The commit introduced tracking of performance percentage
> changes via sysfs in order to restore userspace changes during
> suspend/resume. The problem occurs because the global values of the newly
> introduced max_sysfs_pct and min_sysfs_pct are not reset on a governor
> change and this causes the new governor to inherit the previous governor's
> settings.
>
> This patch sets max_sysfs_pct to 100 and min_sysfs_pct to 0 on a governor
> change which fixes the problem with governor switching. These changes
> also make the initial calculations for max_perf_pct and min_perf_pct
> slightly simpler.
>
> Before patch:
> [root@...el-skylake-y-01 power]# cpupower frequency-set -g performance
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/min_perf_pct
> 100
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> 100
> [root@...el-skylake-y-01 power]# cpupower frequency-set -g powersave
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/min_perf_pct
> 100
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> 100
>
> After patch:
> [root@...el-skylake-y-01 power]# cpupower frequency-set -g performance
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/min_perf_pct
> 100
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> 100
> [root@...el-skylake-y-01 power]# cpupower frequency-set -g powersave
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/min_perf_pct
> 14
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
> 100
>
> Also note that I have tested suspend/resume (using CONFIG_PM_DEBUG):
> [root@...el-skylake-y-01 power]# echo 50 > /sys/devices/system/cpu/intel_pstate/min_perf_pct
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/*_perf_pct
> 100
> 50
> [root@...el-skylake-y-01 power]# echo devices > /sys/power/pm_test
> [root@...el-skylake-y-01 power]# echo platform > /sys/power/disk
> [root@...el-skylake-y-01 power]# echo disk > /sys/power/state
> [root@...el-skylake-y-01 power]# cat /sys/devices/system/cpu/intel_pstate/*_perf_pct
> 100
> 50
>
> Fixes: a04759924e25 ("[cpufreq] intel_pstate: honor user space min_perf_pct override on resume")
> Cc: Kristen Carlson Accardi <kristen@...ux.intel.com>
> Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
> Cc: Viresh Kumar <viresh.kumar@...aro.org>
> Cc: linux-pm@...r.kernel.org
> Signed-off-by: Prarit Bhargava <prarit@...hat.com>
> ---
> drivers/cpufreq/intel_pstate.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
> index 3af9dd7..bb24458 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -986,6 +986,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
> if (!policy->cpuinfo.max_freq)
> return -ENODEV;
>
> + limits.min_sysfs_pct = 0;
> + limits.max_sysfs_pct = 100;
> +
> if (policy->policy == CPUFREQ_POLICY_PERFORMANCE &&
> policy->max >= policy->cpuinfo.max_freq) {
> limits.min_policy_pct = 100;
> @@ -1004,9 +1007,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
> limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100);
>
> /* Normalize user input to [min_policy_pct, max_policy_pct] */
> - limits.min_perf_pct = max(limits.min_policy_pct, limits.min_sysfs_pct);
> + limits.min_perf_pct = limits.min_policy_pct;
> limits.min_perf_pct = min(limits.max_policy_pct, limits.min_perf_pct);
> - limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
> + limits.max_perf_pct = limits.max_sysfs_pct;
> limits.max_perf_pct = max(limits.min_policy_pct, limits.max_perf_pct);
>
> /* Make sure min_perf_pct <= max_perf_pct */
>
Makes sense to me.
Kristen?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists